sv 500 used for sale

Key data: 1500 KW, 1490 1/min

Siemens 1.5MW DC Motor with Watercooler incl. Simovert Masterdrive (Watercooled) Description attached

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss Type: PNB0488 Agraffe: 4 HK (hooks) Clear width: 2,500 mm Max. load per pair of trusses 1,000 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

A pad printing machine from Teca Print is being sold. The machine is available 3x. Price per machine. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee.

Heber conveyor belt GF 34500-600-500 RA2241 Technical data: Conveyor length (NL): 34500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, RF63DT90L4 Electrical data: 50Hz V380-500, kW 1,5 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 34500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralan ...

Key data: 5000 kN, 80 mm

KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 130 x 50 mm Truss Type: SLB Agraffe: 5 HK Clear width: 3,500 mm Max. load per pair of trusses 2,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Arestant Type: AS The scope of delivery includes: 01x Pallet rack stand, used Material color: blue Profile dimensions: 80 x 77 x 1.8 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Height: 4,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Compressed air-cleaned dust filter with stainless steel housing, filter area: 10 m², filter media: 4 filter cartridges, incl. ESM-3 control unit and manifold for flange mounting on the underside. Filter was used for dedusting a horizontal mixer for mineral building materials.

Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Punktgröße: 0,125mm 0,125mm Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 110Pax4 Druckmedien: Standart, Anhänger und RFID-Etiketten

Key data: 400 KW, 500 kVA, 400 V

The largest model in Electroquell's range. The 500 kVA (400 kW) generator with a Ricardo motor is suitable for shopping malls, industrial plants and large investments. Ricardo Motor ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing Drip pan Possibility of continuous operation 24 hours a day Power: 500 kVA / 400 kW Voltage: 400 V Current: approx. 722 A Fuel: Diesel EN 590 Additional options: ATS system, remote communication, cooler for 55 degrees Warranty: up to 60 months

Transnorm curved belt conveyor left bend 180°-650-500 IR600 RA2398 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 650 mm belt width (GB): 500 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,5 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: very good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 650 Belt width in mm: 500 angle: 180° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: withou ...

This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a table size of 1200 x 540 mm and impressive travels of 1020 mm in the X-axis, 540 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a 30-position automatic tool changer and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 500 vertical machining centre we have for sale. Contact us for further details.

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Perkin Elmer Clarus 500 with autosampler and 2 x FID, currently serviced

Demonstration and trade fair machine. including suction line. Equipment: European safety regulations (sign C.E.) olimpic 500 - Version "HP T-ER2" (40) Volt 400 EU Frequency 50 Hz Control console "eye-S" (control panel) Human-Machine Surface Software (HMI) "Maestro active edge" Maestro connect: Preparation without gateway for subsequent installation Fine milling and radius pulling blade unit radius = 1 mm Fine milling and radius drawing blade unit radius = 2 mm Electronic positioning of the upper pressure beams Spacers on the inlet ruler Kit "SAV€NERGY" Interior lighting of the cab and the gluing area "Nesting" sensing rollers Release Agent Spray Unit "AAR" Sprayer for finishing the edge Sprayer for sensitive edges Joining unit "RT-V1" "EASY SIZE" device Glue unit "VC-VM" Ceramic lamp with infrared rays Electronic positioning of the pressu ...

table diameter: 500 mm table load capacity: 420 kg table height: 185 mm centre height: 315 mm center hole: MK 5 mm indexing: 15 ° weight: 275 kg dimensions of the machine ca.: 600 x 850 x 200 m Rotary table in excellent condition for for horizontal and vertical use. - Serial No.: P56030 - for vertical or horizontal use - Indexing every 15° or continiously variable by clamping - mech. Hand wheel with scale - Center bore taper MT 5 - Hand Lever with 3x indexing discs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3 : 900 mm centre distance: 2x 4mm mm Distance between centres: 1x 5 mm mm capacity: 600 kp : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used homogenizer made by Brogli + CIE Basel Switzerland, type: MH 500 B, capacity: 500 liters with heating jacket, frame mixer, teflon scrapers, dispersing mixer and comb homogenizer.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63314301 Year of construction: 1992Load capacity 1000 kgHook travel 4.1 metersDistance suspension to load hook 480 mmMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length of operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz.2 load trains = 1000 kg- emergency stopWeight 43 kggood condition; used

Roller conveyor with drive SFB conveyor technology type ITF / R-KT 50Roller conveyor with driven carrier rollers, roller conveyorMachine- No: 201800954/2 Year of construction 2019Roller conveyor length: 2000 mmUsable roller width: 500 mmRoller diameter: 50 mmNumber of rollers: 21 piecesRoller spacing: 100 mmConveyor speed: approx. 8 meters/minMotor power: 0.12 kWNet connection: 400 volts, 50 Hz- chain drive via SEW gear motor- all rollers driven with freewheel in both directions- ball-bearing steel rollers- Frame profile made of 3 mm U-steel with

Working width: 500mm, voltage/frequency: 380V/50Hz, total connected load: 18A. Inspection possible by prior arrangement.

Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min

max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC ...

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mm height: 110 mm daylight: 240 mm external diameter: Futter 320 mm external diameter: Spannhebel 700 mm weight: 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1600 mm table width: 800 mm stroke height: 900 mm : 310 mm weight max. in kg: 500 kg weight of the machine ca.: 0,16 t : 1,7 x 0,82 x 0,33 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine.

pressure: 500 kN stroke: 40 mm throat: 73 mm Working height from to: 60 - 150 mm table surface area: 115 x 70 mm weight of the machine ca.: 10 Kg .Toggle lever hand press SPECIAL OFFER! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table load: 500 Kg table load capacity: 250 kg. vertikal table diameter: 550 mm swivelling range: 135 (-45 - +90) Grad turning speeds: 0 - 5 stufenlos U/min connected load frequency: 230 V total power requirement: 0,8 KW weight of the machine ca.: 0,255 t dimensions of the machine ca.: 0,82 x 0,73 x 0,71 m Welding turntable with - large passage 165mm - Footswitch - tilt by motor - Speed infinitely adjustable - 250 amp welding current transmission Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 1170 x 580 x 580 mm operating pressure: 2,2 - 8,0 bar dimensions: 1,22 x 0,93 x 1,70 m air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,15 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 3000 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 855 mm table width: 500 mm stroke height: 900 mm : 340 mm weight max. in kg: 500 kg weight of the machine ca.: 0,085 t : 950 x 550 x 450 mm The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 550 mm table load: 500 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlos table load capacity: 250 kg. vertikal total power requirement: 0,8 kW weight of the machine ca.: 245 Kg dimensions of the machine ca.: 820 x 730 x 710 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.

Key data: 5000 kN

Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h

turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m

Suitable for measuring all types of milling and drilling tools, profiles, punching tools, drive and cardan shafts, profile rollers, etc. Accessories: Measuring table adjustment with digital display, Screen diameter: 500 mm, Enlargement: 50 and 100 times, Swivel range of the upper table: +/- 2 mm, Connected load approx.: 230 V / 50 Hz, Dimensions W x D x H approx.: 1200 x 700 x 1800 mm, Weight approx.: 400 kg, colour: Light grey

weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...

Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. - Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% | suitable for: metal cans, glass bottles, plastic jar, paper bags, etc. | container dimensions: diameter 40-80, height 60-180mm with different can feeding screws | max. speed of the machine in neutral: 60 cycles/min | power: 220V, 1.6kW | machine dimensions: L1450xW1230xH1800mm | weight: 190kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new p ...

Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Preset programming possible. Hopper volume: 25 liter. Filling weight: 10-500g. Extension of filling range to 5-600g possible when second dosing screw is added. Built-in filling head height adjuster and weighing cells guarantee accuracy by means of permanent control and automatic correction of dosage. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 50 cycles/minute | power: 220V, 0.95kW | machine dimensions: L800xW790xH1900mm | weight: 130kg. Please note that our new prices ar ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has two filling heads for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 500ml | number of filling heads: 2 | max. number of machine cycles in neutral: 16 cycles/min (corresponds to max. 33 bags/min) | current: 220V, 1.5kW | air pressure and consumption: 5-7bar, 0.65m? | machine dimensions LxWxH: 1990x1300x1980mm | weight: 1500kg. Please note that our new prices are ofte ...

Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.