sv 300 used for sale

Pyrolysis furnace ECON EPO 300 Condition: as good as new, only used 10 times

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Offer 24083 Specifications: - Capacity 300 L - Load capacity up to 750 kg - Drive-in pockets for forklifts -Tilt - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg

Bread Slicer Circular Knife Machine Wabäma Model: R 300 EX The all-rounder among bread slicers EX model for installation in the sales counter! max. number of slices: 140 pieces/min. max. bread dimensions: 250 x 320 x 140 mm, WxDxH Circular knife machine with bread halving Circular knife made of high-quality Teflon special coating Machinery on the move Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 620 x 750 x 860 mm, WxDxH Used machine cleaned with 3 months warranty We stock a wide range of bread slicers!

Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg

Pipe grab, round grab, laying clamp, round material grab, scissor grab -Manufacturer: Tigrip, round material gripper type TRU 15/300 -Grip width: 80 to 300 mm -Load capacity: 1.5 tons -Number: 2x grippers available -Price: per piece -Dimensions: 700/220/H500 mm -Weight: 25 kg/pc.

Mixers for plastic granules and powdered products. Completely in stainless steel. Mixing motor 4 KW. Mixing chamber with separator on load cells. Pre-tank on load cells. Vacuum pump AZO 4 kW.

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 8 grooves SPC 300 8 -V-belt width: 22 mm -Receptacle: Ø132/145 mm for taper clamping bush TB 4040 (can be changed) -Dimensions: Ø300 x 215 mm -Weight: 44 kg

Magnetic chuck, permanent magnetic round chuck, magnetic clamp, magnetic chuck -Magnetic chuck: Permanent magnetic round chuck chuck size Ø 305 mm -Hole circle: Ø 170 mm -Receptacle: short cone 8 / cone 135 - 139 mm -Weight: 54 kg

Spiral seal, labyrinth housing seal, flange seal -Manufacturer: ISW, spiral seal: flange seal 5 pieces/package -Type: 4 Class 300 lbs like Spiraltherm 304SS with inner and outer ring -Quantity: 4 packages available -Price: per package -Dimension package: Ø180 x 30 mm -Weight: 1.8kg/package

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, Digital Caliper -Item No.: 41 2811 300 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm Quantity: 1 piece available -Case dimensions: 465/180/H30 mm -Weight: 1.0 kg

MITSUBISHI S6A-300-3 300 HP 1530 RPM (S6A3 MPTK 405 kW 1840 rpm) Dry Weight :+/- 1900 kg Dimensions: 209 x 101 x 137 cm

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

Gearbox, spur gear, worm gear -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm -Dimensions: 550/270/300 mm -Weight: 40 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hawe, hydraulic cylinder type PS 30/20 Z1143 -Stroke: 300 mm -Piston rod: Ø 20 mm -Hole: Ø 20 mm / distance 530 mm -Number: 1x cylinder available -Dimensions: Ø 62 x 570 mm -Weight: 4.9 kg

DMG GILDEMEISTER CTX ALPHA 300 CNC turning center was built in 2008. The machine, designed for machining workpieces with a maximum diameter of 500 mm, is equipped with state-of-the-art technical solutions that guarantee extraordinary accuracy and precision. Machining is performed inside a large, fully illuminated workspace by a reliable spindle and high-quality cutting tools taken from a 12-position turret. In turn, the operator is provided with a state-of-the-art touchscreen control panel with a perfectly optimised FANUC CNC controller. High reliability, precision and structural stability make the GILDEMEISTER CTX ALPHA 300 CNC lathe the perfect choice for even the most intensive production work. The total weight of the machine is approximately 4350 kg. Technical data of the DMG GILDEMEISTER CTX ALPHA 300 lathe - maximum turning diameter: 500 mm - maximum cutting diameter: 200 mm  ...

depth gauge, depth caliper, caliper, depth caliper -Manufacturer: CSE Inox, depth caliper -Measuring range: 0-300 mm -Vernier: 0.05 mm -Dimensions: 360/160/H10 mm -Weight: 0.3 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 85 mm / 90° / 2 holes Ø 18 mm -Dimensions: see photo technical drawing -Dimensions: 300/102/H81 mm -Weight: 8.7 kg

Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPA 300 4 3020 -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg

clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Clamping surface: 405 x 300 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: 405/300/H200 mm -Weight: 49 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 300 mm -Type: J-3LRLS33M -Piston rod: Ø 35 mm -Bore: 82.6 mm -Dimensions: 550/140/H95 mm -Weight: 13.4 kg

Up-down sander SAC 4R-300 Working width 300mm Working height 2.5-150mm 4 sanding units 2x Bottom unit 2×5.5kW 2x top chiller 2×5.5kW Sweeping brush top and bottom' 2×0.55kw Adjustable feed on the inverter 4-16m/min Electric grinding height adjustment Ability to work in-line with other machines CE Certified Year of production 2001

Try square, locksmithsquare, hair square, precision hair square -Stop angle: leg length 600 x 300 mm -Dimensions: 605/300/H40 mm -Weight: 2.8 kg

Pneumatic cylinder, flat cylinder, pneumatic drive, stamp, flat cylinder -Manufacturer: Festo, flat cylinder stroke 300 mm -Type: unfortunately no longer readable -Piston rod: Ø 16 mm / M12 -Pmax: bar -Dimensions: 465/40/H70 mm -Weight: 2.1 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Henninger, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 -Dimensions: Ø 116 x 300 mm -Weight: 8.2 kg

Type Vacuum tumblers Height 2100 mm Width 1900 mm Length 1800 mm Weight 1100 kg Capacity 300 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece

Tailstock, counter bearing for dividing head, dividing head -Manufacturer: Swedturn, Type ST12 CNC 300 tailstock -Quill: hydraulically driven -Dimensions: see photos -Dimensions: 900/650/H450 mm -Weight: 265 kg

Number of motors: 1 Stück 0: 2500 mm Control: nein Single-sided glazing bead saw Hecht ES 300 A -------------------------------------- swivels from 45° to 45° to fixed stop with automatic feed pneumatic swivel over manual swivel stop with machine base, pneumatic tension Saw blade HM 300 x 3.0/2.2/30 Z 80 Neg. Touch stroke 1.5 m Support 1.5 m with support Key stroke 3 m Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2500 mm (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 300 mm -Dimensions: see photos -Overall dimensions: 300/80/H110 mm -Weight: 17.9 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage, electric carriage, linear carriage -Manufacturer: Afag, linear slide electric slide -Type: ES30-300 -Stroke: 300 mm -Shaft: Ø 20 mm -Dimensions: 525/60/120 mm -Weight: 5.8 kg

Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 300 x 180 mm -Quantity: 1x angle stop available -Dimensions: 305/180/H20 mm -Weight: 0.6 kg

KT7 CNC KSP 150-300 SPEED plasma cutting machine was manufactured in 2019 in Poland. The machine, designed for precision machining of workpieces with a maximum weight of 4 tonnes, is an excellent choice for small businesses as well as for large industrial plants. Its compact design and all components have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. The SPEED KSP 150-300 plasma cutting machine is also equipped with, among others, a WALTER refrigeration dryer and many useful systems that increase precision and production efficiency. The total weight of the machine is 850 kg. Technical specifications of the KT7 CNC KSP 150-300 SPEED plasma cutting machine - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110 mm - travel speed: 25000 mm/min - working speed: up to 10000  ...

- Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure: 6 bar - Capacity : 30 – 120 hl/h - With semi-automatic cleaning - Dosing pump was replaced in 2017 - Machine in good condition Dimensions: - Length : 1800 mm - Width: 850 mm - Height: 2000 mm

KT7 CNC KTP 300-150 plasma cutting machine was built in 2016 in Poland. The machine, designed for machining workpieces with a maximum thickness of 32 mm, has a stable waterbed table that ensures clean cutting, material cooling and reduces gas emissions during machining. Workpieces produced in this way stand out for their excellent precision and do not require other secondary processes to be undertaken. In addition, the machine’s compact design and all its components have been hot-dip galvanised and powder-coated to prevent rust and guarantee trouble-free operation throughout its lifetime. The equipment includes among others CAM software and a powerful plasma source HYPERTHERM. The KTP 300-150 plasma cutting machine weighs 800 kg. Technical specifications of the KT7 CNC KTP 300-150 plasma cutting machine - maximum sheet metal thickness: 32 mm - maximum sheet metal weight: 2000 kg  ...

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 300 x 200 mm -Quantity: 1x flat angle available -Dimensions: 300/200/H5 mm -Weight: 0.7 kg

0: 300 mm 0: max./nom: 6.000/5.085 m³/h 0: v.V./nom: 2.950/2.400 Pa pa Filter capacity: 36,2 m² m² weight: ca. 1.300 kg Dimensions (L/W/H): 3.880 x 1.020 x 2.250 mm Dust extractor NE-J 300 3 ton. m. Jet filter regeneration -------------------------------------------------- Including a new type of extinguishing device with a drop flap and oxygen extraction, 5 m cable for junction box, high-efficiency reluctance motor IE5, FU control, Wired 7 color touch panel, automatic start/stop start control and monitoring of up to 10 woodworking machines included automatic slide control, integrated emergency stop function and is of course H3 tested. The newly designed model fits into any standard shipping container. The suction nozzle with injection box and non-return flap is located in the middle of the front dust extractor. The highly efficient JET filter regeneration guarantees high Filter servi ...

Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: Allgaier, manual spindle press -Insertion height: 345 mm -Column clearance: 300 mm -Table width: 300 mm / Bore Ø 60 mm -Spindle mount: Ø 40 mm -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

mobile welding fume filters, welding fume extraction -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 230 mm -Jaw height: 73 mm -Clamping depth: max. 300 mm -swivel -Weight: 70 kg

Type: SV 300 l 2P-V Completely stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 124 Length: 143 Height: 147

Machine vice, sturdy vice, drill press vice -Jaws can be moved depending on the workpiece geometry -Vise: rotatable -Jaw width: 255 mm -Clamping depth: max. 300 mm -Dimensions: 680/330/H180 mm -Weight: 95 kg

Reflective light barrier, light barrier -11-30 V Price: per piece -Number: 8 available -Weight: 0.7 kg