sv 300 used for sale

: 3000 m³/h power capacity: 2,2 kW Speed: 3000 U/min. : 200 mm Dimensions (L/W/H): 1250x700x2000 mm Weight: 160 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3050x760x2100 mm Weight: 400 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible.

power capacity: 30/37 kW volt: 380 V ampere: 70/78 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3000 mm width: 2000 mm height: 250 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 2 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pleiger hydraulic motor for Krauss Maffei MOS 3000-05-204 Krauss Maffei No. 6249672

General SKU262X271 MakeProminox TypeCuve No.30430 Year of construction2000 Mounted on legscheck Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume403 Ltr. Motor2.2 KW Specified Features - Processing vessel Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. ManholeDia. 204 mm OutletDN51 Motor2,2 kW, 230/400 volt, 1400 rpm With jacketcheck Processing vessels Closed stirring vesselcheck Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. Conical bottomcheck Dished top sidecheck ManholeDia. 204 mm Top connectionscheck OutletDN50 Half coil jacketedvolume 13,3 l. Max. temperature150°C With anchor stirrerwith scraper With dissolver stirrercheck Motor2,2 kW, 230/400 volt, 1400 rpm Speed mixing shaft5,3/32 rpm Motor5,5 kW, 240/380 volt, 1460 rpm MaterialStainless steel 1.4435 (316L) General L ...

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa

This ACCUWAY UT-300LX2M Lathe machine was manufactured in the year 2016. It is equipped with a FANUC 0i-T Control Unit. It has a heat exchanger for electric cabinet and a lubrication system. The monitor (LCD) is 10.4 colored and dispose a three color warning light.

This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information.

This Geminis GHT-4 720 x 3000 was manufactured in 1999. It features a maximum swing over bed of 720 mm and a distance between centres of 3000 mm. The main spindle supports a speed up to 1600 rpm with a power of 17/20.5 kW. It includes a Duplomatic turret with 8 tool positions and a longitudinal chip conveyor. Consider the opportunity to buy this Geminis GHT-4 720 x 3000 horizontal turning machine. Contact us for further details regarding this machine.

This 5-axis OMV Active Five 3000 was manufactured in 2008. It features a fixed table with a tilting head, Heidenhain TNC-530 control, and a travel range of 3000 x 1800 x 850 mm. The spindle operates at 22,000 rpm with a HSK63A taper and a 30-position tool changer. If you are looking to get high-quality milling capabilities, consider the OMV Active Five 3000 machine we have for sale. Contact us for more information.

This 3-axis Zayer 30KF 3000 vertical machining center was manufactured in 1997. It offers robust construction and precision for complex machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information.

This 3-axis Mazak VTC-300C vertical machining center was manufactured in 2005. It features a spindle speed range of 40 - 12,000 RPM and a robust table capable of handling loads up to 1400 KG. With dimensions allowing for significant movement (X: 1740 mm, Y: 760 mm, Z: 660 mm) and equipped with a 30-piece ATC, this machine is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-300C machine we have for sale. Contact us for more information.

This 3-axis FAMUP COBO MM 3000 was manufactured in 2002. It features a working area of 3000 × 600 × 600 mm, spindle speed up to 15,000 rpm, and ISO 40 spindle taper. Equipped with a 30-position tool changer, high-pressure through-spindle coolant, a dividing wall for pendular jobs, and a chip conveyor. Consider the opportunity to buy this FAMUP COBO MM 3000 vertical machining centre. Contact us for more information.

This KEYENCE WM 3000 was manufactured in 2022. A reliable CMM machine, it offers precise dimensional measurement and quality control. Ideal for industries requiring high accuracy in component inspection. Contact us for more information about this machine.

This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information.

This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information.

pressure: 130 t chamfer lenght: 3200 mm distance between columns: 2700 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 200 mm dayligth: 480 mm : 200 mm/s bending speed: 0-10 mm/s : 120 mm/s total power requirement: 7,5 kW dimensions: 3600 x 1800 x 2700 mm weight: 8.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine.

General SKU379X951 LocationBarneveld CEcheck MakeMonTech TypeD-RPA 3000 Main Features MaterialStainless steel Specified Features - Viscosity test machine Electric capacity230 V MaterialStainless steel General No.090 KA 666 Year of construction2019 With switchcheck Floorspace0,70 x 0,55 m Total height1,52 m Extra SpecificationsMachine type: MonTech D-RPA 3000 Dynamic Rubber Process Analyzer (RPA) / advanced rheometer for rubber &:amp: polymers (QC and R&:amp:D).Use: measures viscoelastic and curing behavior (e.g., G’, G’’, tan δ, viscosity, cure kinetics) under controlled temperature, strain and frequency.Temperature range: ambient to 232 °C.Frequency range: 0.001–100 Hz.Strain range: up to 360° (very wide dynamic range).Torque range: up to 250 dNm.Sample volume: approx. 4.5 cm³ (sealed biconical die system).Utilities (typical): compressed air min. 4.5 bar: p ...

This machine tool was manufactured in 2016. The BREUNING SIMAG 80.1 R 3000 features a multi-channel loading magazine IV, 8 guide channels with high-performance oil flow, and PLC control with an integrated touch screen terminal. It supports material diameters of 40-80 mm and lengths of 1500-3000 mm. Ideal for handling heavy loads up to 850 kg. A great opportunity to buy this BREUNING SIMAG 80.1 R 3000 machine tool. Contact us for further details regarding this machine tool.

This 5-axis AgieCharmilles CUT 300MS was manufactured in 2016, featuring submerged wire-cutting technology. It supports a maximum workpiece size of 1200 × 700 × 400 mm and a weight up to 1500 kg. The machine offers rapid movement across X, Y, U, V axes at 9.8 m/min and includes integrated collision protection. If you are looking to get high-quality precision cutting capabilities, consider the AgieCharmilles CUT 300MS machine we have for sale. Contact us for more information.

This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information.

General SKU379X1446 LocationBarneveld CEcheck MakeMonTech TypeABR 3000 Main Features MaterialStainless steel Specified Features - Viscosity test machine Viscosity meter(Abrasion Tester) Motor230 V Speed40 rpm MaterialStainless steel General No.400 KA 666 Year of construction2019 With switchcheck Floorspace0,74 x 0,30 m Total height0,32 m Weight60 kg Extra SpecificationsRotary drum diameter: 150 mm Roll length: 460 mmEquipped with a quick clamp for test specimens. Peripheral speed of the drum with abrasion sheet: 0.32 m/s.Food additivesFeed additivesPlastic & polymersRubberOintmentsViscosity test machinesMonTechIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Feed additivesIndustries > Chemical > Plastic & polymersIndustries > Chemical > RubberIndustries > Pharmaceutical > OintmentsPlastic machinery > Viscosity test machinesBrand > MonTech What you  ...

This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information.

General SKU379X946 MakeMonTech TypeCP 3000 No.210 MI 687 Year of construction2021 LocationBarneveld Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Cutter Cuttercheck MaterialStainless steel General Floorspace0,90 x 0,70 m Total height1,085 m Weight225 kg CEcheck Extra SpecificationsLarge rubber and Polymer Bale CutterOperation / throughput: up to 12 cuts/min (cutting &:amp: lifting speed adjustable)Max cutting width (bale width): 520 mmMax cutting height (bale height): 240 mmCutting force (adjustable): 0.6 t @ 2.0 bar up to 4.6 t @ 10.0 barKnife: hardened, precision-ground: monoblock cutting knife (tool steel, fully hardened)Material infeed: rear roller conveyor, total length 750 mmSafety: pneumatic two-hand operation (anti-tiedown) + transparent safety shieldsUtilities: compressed air min. 2 bar (5 bar recommended): no elec ...

General SKU379X1442 LocationBarneveld CEcheck MakeMonTech TypeDisperTester 3000+ Main Features MaterialMild steel Specified Features - Viscosity test machine Viscosity meter(dispertester) Electric capacity230 V MaterialMild steel General No.318 KA 666 Year of construction2019 With switchcheck Floorspace0,22x0,40 m Total height0,18 m Weight25 kg Extra SpecificationsStandards Compliant with ISO 11345:2006 and ASTM D 7723 (dispersion analysis) Optics Magnification: 100× Field of view: 12 mm × 3.5 mm Agglomerate measurement range: 1 µm – 250 µm Image resolution: 10 MP with telecentric optics Focus: automatic or manual Illumination: controllable multi-directional LED Mechanical Precision scanning with linear two-stage system enabling multiple readings per sampleFood additivesFeed additivesPlastic & polymersRubberOintmentsViscosity test machinesMonTechIndustries > Foo ...

sheet width: 3000 mm plate thickness: 8,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,80 t dimensions of the machine ca.: m Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limiter Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc ... 0i - TD Turning diameter ... 500mm Turning length ... 1090mm Inclined bed Spindle bore ... 86mm Number of tools (driven tools) ... 12/12 Axis X ... 300mm Axis Z ... 1200mm Spindle speed ... 10-3500 rpm Axis C ... 0,001° Main engine power ... 15/18.5kW Machine weight ... 6000kg L x W x H ... 4483x1800x1830mm

Manufacturer: Keyence Model: WM 3000 Year of Manufacture: 2020 Type of Machine : 3D coordinate measuring system The device has already been upgraded to Windows 11 Measurement Specifications - Maximum Measuring Range (W x D x H) 10000 x 3500 x 5000 mm - Guaranteed Accuracy Range (W x D x H) 3000 x 1500 x 1500 mm - Measuring Accuracy +/- (28 + 5L/1000) micrometers - Repeatability +/- 10 micrometers Minimum Display Resolution - Distance Resolution 0.001 mm - Angle Resolution 0.001 degrees Camera Unit Rotation - Theta Rotation (Pan) +/- 90 degrees - Tilt Rotation +/- 30 degrees Connectivity - External Input Voltage-free input, 2 inputs - Bluetooth Bluetooth 5 - USB USB 3.0 - Infrared Communication 945 nm Power Supply - Power Supply Type Supplied via dedicated power supply unit - Rated Voltage DC 24 V - Power Consumption 1.7 A Environmental Conditions - Operating Temperature + ...

General SKU347X802 MakeMorton LocationBarneveld CEcheck TypeFKM 3000 D-4MZ Main Features MaterialStainless steel Volume3000 Ltr. Motor37 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity3000 Ltr. Trough sizesø 1110 x 2960 mm Inletø 250 Inspection hatch2x 540 x 400 mm Outletø 350 mm Motor37 kW,(400V, 1470 rpm) With variable speed drive115 rpm Speed mixing shaft127 rpm With lump breaker(4x) Motor4 kW, 400 V 2920 rpm Speed lumpbreaker3000 rpm MaterialStainless steel 1.4401 (316) General No.24262 Year of construction1999 Floorspace4,00 x 1,65 m Total height1,80 m Weight1900 kgMinerals & inorganicBiopharmaceuticalOther feedAnimal feedSugarFood additivesOther pharmaceuticsFeed additivesCatalysts & fillersPlastic & polymersSpicesAgrochemicalsOther chemicalStarchFine chemicalsTea, herbs & coffeeGeneric medicinesPowder ...

General SKU347X806 LocationBarneveld CEcheck MakeMorton TypeFKM 3000 D-4MZ Main Features MaterialStainless steel Volume3000 Ltr. Motor30 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity3000 Ltr. Trough sizesø 1110 x 2960 mm Inletø 250 Top connectionsø 350 mm Inspection hatch2x 540 x 400 mm Outletø 350 mm Motor30 kW, 380 V Speed mixing shaft115 rpm With lump breaker(4x) Motor4 kW Speed lumpbreaker3000 rpm MaterialStainless steel 1.4401 (316) General No.M24066 Year of construction1995 Floorspace4,00 x 1,65 m Total height1,80 m Weight1900 kgMinerals & inorganicBiopharmaceuticalOther feedAnimal feedSugarFood additivesOther pharmaceuticsFeed additivesCatalysts & fillersPlastic & polymersSpicesAgrochemicalsOther chemicalStarchFine chemicalsTea, herbs & coffeeGeneric medicinesPowdered foodsPowder turbo mixersMorton ...

2 DC 8/32 towers, each with 8 stations, suction feeder, DBM 120 stapling and folding unit, DBM 120T trimmer, stacker System 5000

no missing parts, no damages - well maintained

Technical data for the shelf: Shelving system: Meta Type: Clip The scope of delivery includes: 01x Shelf, used Soil name: MS150-III Material colour: sendzimir galvanised Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg|pcs. max. load per shelf 150 kg with evenly distributed load Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

This 5-axis FAMU ACTIVE FIVE 3000 was manufactured in 2010. It features extensive travels of 3000 × 1200 × 900. Notably, the electrospindle and Z axis components were replaced in March 2025, and the X axis components in 2024, ensuring enhanced reliability and performance. If you are looking to get high-quality milling capabilities consider the FAMU ACTIVE FIVE 3000 machine we have for sale. Contact us for more information about this machine.

This 4-axis DANOBAT HG 91-3000-B8 was manufactured in 2007. It features a CNC control system by SIEMENS 840 D, a maximum grinding length of 3,000 mm, and can handle workpieces up to 5,000 kg. The machine offers a swivel angle from -30º to +180º and a cutting speed of 45 m/s. Consider the opportunity to buy this DANOBAT HG 91-3000-B8 cylindrical grinding machine. Contact us for more information about this machine.

This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information.

Key data: 560 mm, 560 mm, 660 mm

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe

Air recovery system. 400V, 50Hz, 2,65 kW

Key data: 3000 mm, 10 mm

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touch screen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down device, mot. Back gauge up to 1000 mm depth -Similar to illustrations- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

MONGUZZI CNC 2-Knife Veneer Cutting Machine AFD-52-3000 from location for sale.

Elec: 230V / 50Hz , Weight: 150 kg, Minimum weight maximum weight (g): maxi 300gr, Pack mn: 100 / min, Minimum Maximum Temperature: +5°C - 40°C, e: 0,1g, Min max weight (g): max 300g, Cadence: m/min: 27 m /mn, Direction of transfer: from left to right, Minimum maximum weight (g): max 300gr, Minimum maximum temperature: +5°C - 40°C, Pack min: 100 / min, Min pack: 100 / min, Transfer direction: from left to right, Min max temperature: +5°C - 40°C, Cadence: m / min: 27m/min

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3460 mm table height: 800 mm 0: 220 bar cutting angle adjustment: 0,5x3 ° down holder: 18 back stop - adjustable: 750 mm front stop - adjustable: 1000 mm main drive: 7,5 kW oil volume: 300 l total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,7x2,0x1,8 m cutting angle adjustment manually blade gap adjustment manually angle stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.