sv 3 maxi used for sale

Lifting capacity: 300 Kg Magnetic field: 228 x 122 mm weight: 16 Kg dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 3000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 117 kg length in width: 620 mm length in total: 3400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mm saw band length: 3320 x 27 x 0,9 mm mm cutting width: 330 mm Control: NC capacity 90 degrees: flat: 330x 260 mm capacity 90 degrees: square: 260 x 260 mm band speed: 15 - 100 m/min total power requirement: 2,2 kW weight of the machine ca.: 1,24 t dimensions of the machine ca.: 3,3 x 2,83 x 2,23 m Attention: special price! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PE-storage tank with centrifugal pump and UV-unit for germinating fresh water.

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: 320 mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 160 mm spindle taper MT: 4 MK table:: 500 x 420 mm column diameter: 120 mm turning speeds: 85 - 1800 U/min feeds: 0,1 - 0,2 - 0,3 mm/U total power requirement: 0,85 / 1,5 kW weight of the machine ca.: 500 kg. range L-W-H: 965 x 515 x 1920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transmitter with data output and digital local display from Endress and Hauser.

material width: 305 mm material thickness: 1,0 mm speed: von Hand weight: 45 Kg dimensions: 500 x 340 x 420 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,22 t dimensions: 0,7 x 0,9 x 1,9 m ATTENTION: SPECIAL PRICE! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanship The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details.

Reference Num.: 4378 Brand: Ryobi Type: 3302 HA Construction year: 1999 Impressions: 40 mio Size: 340 x 450 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 340 x 450 mm Printing speed: max 10,000 sheets/hour Printing units: 2

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 17 - 70 U/min total power requirement: 3,0 kW weight of the machine ca.: t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m SPECIAL PRICE! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer  ...

cutting diameter: 280 mm capacity 90 degrees: flat: 380 x 260 mm capacity 90 degrees: square: 260 x 260 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3440 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mm table width: 1500 mm stroke height: 1900 mm weight max. in kg: 3000 kg total power requirement: 1,5 kW stroke speed - idle stroke upwards: 55 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,650 t dimensions of the machine ca.: 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 3000 mm Tube length: 3280 mm numbers of toolholders: 4 : Rohr galvanisch Verzinkt dimensions: 3,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 700 mm cutting width: 250 x 320 mm cutting speed: 25 - 90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 120 mm : 120 mm : 190 mm Impact energy: 190 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,41 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with ...

thread dia.: M10 - M33 mm : 35/115 U/min. : 320 Nm air pressure: 6 - 8 bar working area: 400 - 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 100 x 195 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 100 x 135 mm saw blade turning speeds: 2800 U/min total power requirement: 1,5 kW weight of the machine ca.: 250 kg dimensions: 0,7 x 0,7 x 1,4 m ATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 14000 kg Loading weight per level: 2000 kg Number of load levels: 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,8 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 330 mm table width: 220 mm x-travel: 210 mm y-travel: 125 mm table height: 150 mm T-slots: 12 mm weight: 33 kg dimensions: 0,41 x 0,35 x 0,22 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 34,0 kN stroke: 40 mm throat: 130 mm Working height from to: 80 - 240 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 80 Kg dimensions: 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 3500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V/280AH Li-ion weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,94 x 1,23 x 2,25 m New EP EFL 352 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 3500 kg Headroom of 2.25 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 945 x 605 x 605 mm operating pressure: 2,2 - 5,5 bar dimensions: 1,0 x 0,61 x 1,65 m : 1300 x 1000 x 750 cm Air consumption: 250 l/min. weight of the machine ca.: 0,09 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 12000 kg Loading weight per level: 2000 kg Number of load levels: 6 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,8 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 18 - 100 m/min table height: 890 mm total power requirement: 2,2 kW weight of the machine ca.: 0,99 t dimensions of the machine ca.: 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters suc ...

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 240 mm : saw band length: 2965 x 27 x 0,9 mm table height: mm band speed: 37 / 76 m/min total power requirement: 1,0 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 1,0 x 1,6 x 1,4 m double miter band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,285 t dimensions: 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The 2009 Zalkin CA 5 360 NG is a used capping machine, specifically a screw capper, developed by Zalkin. This machine was used for capping plastic bottles with a capacity of up to 2,400 ml. It works with Pano TO 100 mm PP HOmao caps without liner.

; Gross weight [kg]: 670; Engine: Battery System: LiFePO4; Accessories: Battery, Control Panel, AC output sockets: 2x 32A (1 for parallel), AC Input sockets: 1x 15kW, DC input: 1x 30kW

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 150 kg Dimensions (LxWxH): 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine designed for profiling and dressing flats, side, angular, radius and special shapes on diamond and CBN wheels. Especially suitable for single or multiple wheel packs., Accessories: Optical linear scale with digital display counter (0,001 mm) X, Z Axes 2/3” TV Camera with 15” LCD monitor (microscope with zoom 15‐120 factor zoom included), High performance swivelling angle reader (0,05°) Diamond / CBN wheel spindle speed stepless adjustable 100 - 1000 rpm Turning speed of dressing wheel stepless adjustable 200 - 2000 rpm Stepless oscillation speed, Automatic central lubrication Manual dressing device for silicium wheel Spindel-motor power max. 3 PS (2,25 kW) Dressing-spindle motor power 2 PS (1,5 kW) Plexiglass splashguard Extractor Optional available: Telecentric zoom system & DXF file convert & graphic include : - PC - Screen : upgrde to 22 - Backlight : upgrade to vertica ...

; Power [PS]: 359; Gross weight [kg]: 4600; Engine: Volvo TAD1380GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 419; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320