sv 3 maxi used for sale

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device -Manufacturer: TROX, ventilation duct fire damper shut-off device -Type: FK -Dimensions: 390/390/500 mm -Weight: 16.9 kg

Pressure vessel, pressure tank, pressure vessel, -Pressure tank: Stainless steel compressed air tank -Contents: approx. 1.5 liters -Item No.: 4541 ABD10 190 -Number: 19 containers available -Price: per piece -Dimensions: 385/150/H105 mm -Weight: 4.2 kg/pc.

Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement.

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment.

Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.

Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.

This 3-axis Mazak VTC 300C II was manufactured in 2012. It features a spindle speed of 12,000 RPM and a tool capacity of 30 tools in the automatic tool changer. The machine has a generous travel of 1740 mm in the X-axis, 760 mm in the Y-axis, and 660 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 300C II vertical machining centre we have for sale. Contact us for further details.

description: Here we offer a whole range with different Siemens SITOP power supplies. It is possible to buy the entire range, but also parts of this range can be purchased. After delivery / pickup, you have the right to return the purchase without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offe used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements wihtout guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services an ...

description: The paddel dirstributor allows a 1 line-> 2 line distribution. This offer does not include a distribution table (can be offered separately). The distribution is incl. paddle/ frame/ switchboard / software serial number: 041483 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technic ...

300 litre stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitation, jacket and electrical panels. Motor characteristics: 43.19 kw at 50 Hz 400 V

Plasma cutting machine manufactured in 2020. This PLASMACUT 3015T features a cutting area of 3,020 × 1,520 mm and a maximum plate thickness of 50 mm. It includes a robust gantry drive system and operates with a Hypertherm Powermax 105 Sync plasma power source. If you are looking to get high-quality plasma cutting capabilities, consider the PLASMACUT 3015T machine we have for sale. Contact us for further details regarding this machine.

Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.

Homag Profi KAL 310/8/A3 with Power TVL 100/15/LQ/S and Profi KAR 330/7/A3/WZ – built in 2013, For sale is a high-qualityHomag edge banding machine Profi KAL 310/8/A3, built in 2013, combined withPower TVL 100/15/LQ/S and Profi KAR 330/7/A3/WZ,, State: Very good, well-maintained condition, power: Efficient and precise processing for the highest quality standards, Equipment:, ✔ Fully automatic edge processing, ✔ High flexibility for different materials, ✔ Integrated feedback for optimized production processes, ✔ Robust and reliable technology from Homag, Ideal for professional use in wood processing!, Please contact us for further details or to arrange a viewing., Subject to prior sale, changes and errors!

Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 0,37 kW condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 350 Roll width in mm: 280 Roll division in mm: 110 Driven: YES, NO scope of delivery: without supports and side guides For individual, expert advi ...

CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details.

Press brake manufactured in 2018. This IBETAMAC 3200 100T features a pressing force of 100 t and a bending length of 3,200 mm. It includes controlled axes for X and Y, along with safety equipment such as additional side safety lasers. The machine is practically unused, fully functional, and available for testing. If you are looking to get high-quality bending capabilities, consider the IBETAMAC 3200 100T machine we have for sale. Contact us for further details.

ATEX calibrator disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2011 ENGINE 1 TECHTOP 5,5 kW 50 Hz 975 rpm Equipment configuration ATEX Condition As is Made by BACHILLER

Press brake manufactured in 2019. This Vimercati PHSY 30X1250 features a pressing force of 30 tons and a bending length of 1,250 mm. It includes an X-axis travel of 400 mm and an R-axis travel of 130 mm. If you are looking to get high-quality bending capabilities, consider the Vimercati PHSY 30X1250 machine we have for sale. Contact us for further details.

Coating/varnishing machine manufactured in 2011. This CEFLA Smartparquet MRF-2VS/300 features a working width of 300 mm and a total installed power of 6 kW. If you are looking to get high-quality coating capabilities, consider the CEFLA Smartparquet MRF-2VS/300 machine we have for sale. Contact us for further details.

Edgebander manufactured in 2018. This BIESSE JADE 340 features a Biesse HD touchscreen control unit and operates at a feed rate of up to 12 m/min. It accommodates panel thicknesses from 10 to 60 mm and edge thicknesses from 0.4 to 8 mm. If you are looking to get high-quality edge banding capabilities, consider the BIESSE JADE 340 machine we have for sale. Contact us for further details.

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2004 ENGINE 1 FIMM 4PE80 B 0,75 kW 50 Hz 1990 rpm Condition As is Made by BACHILLER

Cutting speeds: 30/60/130/260m/min, mains connection: 380V/50Hz three-phase, rated supply current: approx. 7.5A, upstream fuse: 20A slow-blow. An on-site inspection is possible.

One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible.

Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement.

Marchesini 3G20100610 turning conveyor for folding cartons, belt width 70 mm, electrics 1x220V+N+PE/50Hz, max. absorbed power 2 A, max. trip out value 6 kA, machine floor space approx. 1300 x 700 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 130 kg

Manufacturer: Digicoater , Type: 3080, Year: 2005, Control: Siemens C 7, Work piece width min-max mm: 400 - 3.000, Min.-max. workpiece length in mm: 8.000, Min.-max. workpiece height in mm: 100, Spraying heads - total: 4, work piece detection: yes, Spraying stations: 4, Feeding speed m/min: 1,2 - 4,8, Electrical power consumption kW: 6,4, Required space L x W x H mm: 12.000 x 5.000 x 1.600, Year :2005

Manufacturer: Homag, Type: Optimat BAZ 311/40/K, Year: 2007, Software: PC85 CNC CORE Z, Feeding speed max m/min: X,Y-80, Z-30, Working range X: 4000, Working range Y-axis: 1220, Working range Z: 12-300, Year :2007

Diesel Fuel Tank 4.500 Liter, 4.500 Liter Tank, UL142 Certified

Diesel Fuel Tank 1000 Liter, 1.000 Liter Tank, KIWA Certified; Gross weight [kg]: 540

Diesel Fuel Tank 2.000 Liter, 2.000 Liter Tank, KIWA Certified; Gross weight [kg]: 823

Manufacturer: Holzma , Type: HPL 380 43/22, Year: 2010, Optimisation: yes, Max plate format mm: 4300 X 2200, Min-max plate thickness mm: 6-40, Cutting lenght mm: 4300, Working hight mm: 95, Vorschub Sägewagen : 150, Pressure beam control: yes, Network-capable: yes, Angle pressure fixture: yes, Saw Blade Diameter mm: 380, Number of clamping tools: 7, Feeding from back side: yes, FREE TEXT: Spannsystem Sägeblatt Powerlook/Voritzer gesteuert für Postforming Platten, Year :2010

Manufacturer: KBM Kantenschleifmaschine, Type: KBM 3200, Year: 2013, Control: hand, Control: hand, Roller diameter D mm: ca.120, Table stop mm: ca.900, Sanding area (beam): yes, Sanding belt width max mm: 150, Sanding belt length max mm: ca.3200, Sanding unit slewable up to 45°: yes, Schleifbandgeschwindigkeit min-max m/sec: 2 Stufig, Sanding belt dimensions mm: ca 3200 X 150, Bandantriebsmotor kW: 2,2, Oszillation mm: ca.20, Year :2013

Manufacturer: Cefla UV 1 Lampe, Type: TTV 3500, Year: 2003, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Working widht max mm: 1300, Number of lamps: 2, kW power 1 lamp: ca.12,5, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 120, Conveyor lenght mm: 3500, Chain pitch mm: 140, Working hight approx mm: 930, Feeding speed m/min: 10-22, Conveyor: Stange, Drive power kW: ca.0,75, Exhaust air diameter mm: 250, Year :2003

Hersteller : Simenskarte, Type: 6 ES 5921-3WB13, Control: Siemens, Serial number: 548.226.7102,

Manufacturer: Viet, Type: Valleria Challenge 333TM, Year: 2000, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Year :2000

Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005

Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine.

This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details.

Manufacturer: Homag, Type: Eingangskarte 32x24V, Model: 2us nach + schaltend PNP, Serial number: 2-083-01-5005, Year: 1995, Nur Abholung : 200, Sale without warranty: yes, Installation height: Preis ist für 1 Stück, Year :1995

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,