sv 3 maxi used for sale

Dough mixer Container volume: 80 liters Dough mixers are intended for professional use in the bakery and catering industry They are used to prepare primarily dough, but they can also be used to prepare other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger amounts of dough continuously They consist of a container for ingredients and a mixing tool (spiral) Features: Flour capacity: 30 kg Test capacity: 50 kg Container capacity: 80 liters Mixing speed: 125/250 rpm Bowl speed: 12.5/25 rpm Voltage: 380V 50Hz Electricity: 3.5kW Machine size: 950x590x1100 mm Weight: 290 kg

2 BOLZ sterile tanks with agitator. volume 16,150 liters max. excess pressure 3.2 bar max. allowable working temperature 150 °C double jacket --> YES Volume double jacket 1,000.0 liters Dimensions: diameter inside 2.490 mm diameter outside 2.580 mm cylindrical height 2.500 mm total height 5.000 mm wall thickness bottom 6 mm wall thickness cylinder 8 mm Full drawing of the tanks available. Used, but in good condition. Visit possible

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Steel, crane chassis without drive -Beam width: adjustable, set to max. 130 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 405/360/H350 mm -Weight: 43 kg

conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: Round wire link belt made of stainless steel -Width: 610 mm -Length: 3480 mm -Transport dimensions: Ø 240 x 610 mm -Weight: 22.1 kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Grinding wheel width: 125 mm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, No. of regulating wheel speeds: infinite, Regulating wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, Tall: 1260 mm, Weight: 1600 Kg

grinding length: 600 mm grinding width: 300 mm workpiece height: mm total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,9 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Clamping surface: 405 x 300 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: 405/300/H200 mm -Weight: 49 kg

serrated knife, scraper knife, machine knife, knife -Scraper knife: blade insert 6 pieces -Type: 721 B 218 -Hole diameter: Ø 6.5 mm -Number: 6x blades available -Price/Delivery:complete -Dimensions: 345/65/1 mm -Weight: 0.2 kg/piece

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm -Roller spacing: 140 mm -Quantity: 1 piece available -Dimensions: 350/80/H170 mm -Weight: 6.6 kg

tires, solid rubber tires, forklift tires -Manufacturer: Rigdon, solid rubber tire SE 90 with rim -Tire size: 16x6-8 -Rim: 33R-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Quantity: 1x tire available -Dimensions each: Ø 380 x 165 mm -Weight: 20 kg

tires, solid rubber tires, forklift tires -Solid rubber tires: with rim -Tire size: Ø 380 mm -Hub: Ø 25 x 100 mm -Quantity: 1x tire available -Dimensions: Ø 380 x 110 mm -Weight: 18 kg

Roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Roofing nails: Nail rolls, 2 partially used cartons/total approx. 10,000 pieces -Type: DPN 31x22 FV Hot-dip galvanized -Price/Sale: complete -Dimensions: 470/280/H240 mm -Total weight: 17.1 kg

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-300 grams Machine weight: 62 kg Delivery time: 6-8 weeks after advance payment

Code: 0409 Brand: THEOREMA Model: BR 3000 SPECIAL - CE Standard CNC boring and pantograph working centre with 3 controlled axis for furniture, kitchens, bathroom furniture, panels, doors and miscellaneous - CE standard Technical data: Minimum overall dimensions Useful length X axis mm 3000 Useful length Y axis mm 1300 X axis speed mt/min 24 Y axis speed mt/min 24 Z axis stroke mm 65 Max panel thickness mm 65 Boring unit with n° 18 spindles - Right-left drill chuck diameter mm 10 - Rpm 4000 Pantograph with pneumatic tool release - Motor Hp 7,5 - Rpm 0/18000 - Inverter for spindle Kw 5,5 Nesting worktable Suction cups mm 150 x 150 Rapid panel positioning Optimisation of the drilling path Specularity of drilling and milling cycles Interpolation on three X-Y-Z axis Vacuum pump cubic metres 100 Compressed air atm 6 Overall dimensions: mm 4400 x 1700 x 2400 h Weigh ...

Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Rexroth, hydraulic cylinder type CD70B25/16-320 -Stroke: 320 mm -Piston rod: Ø 16 mm / M16 x 1.5 -Hole: Ø 10 mm / distance 515 mm -Number: 1x cylinder available -Dimensions: 550/45/H70 mm -Weight: 2.7 kg

Edge Press Hess Type mobil 3000 Machine No. M 2 2791 1538 Year of manufacture 1991 Working length 3000 mm Pneumatic Banding width 60 mm Pressure range 0 – 8 bar 6 press cylinders, pressure plate 120 mm diameter Mobile on castors Heavy version Heating element 0 – 200 °C Solid edge preheating device Length 3200 mm x width 850 mm Weight approx. 450 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 320 mm -Type: B2-40/18x320/3 TGL10906 -Piston rod: Ø 18 mm -Hole: Ø 25 mm / distance 525 mm -Dimensions: Ø 60 x 590 mm -Weight: 5.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 390 mm -Art.No.: 0245 90 103634 -Piston rod: Ø 30 mm -Dimensions: 555/160/H70 mm -Weight: 8.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 340 mm -Piston rod: Ø 35 mm / M22x1.5 -Hole: Ø 30 mm -Dimensions: Ø 75 x 600 mm -Weight: 10.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 320 mm -Type: B2-63/28x320 TGL10906 -Piston rod: Ø 28 mm -Holes: Ø 40 mm / retracted distance 595 mm -Dimensions: 695/87/H145 mm -Weight: 14.3 kg

x-travel: 3000 mm y-travel: 800 mm z-travel: 1100 mm total power requirement: kW weight of the machine ca.: 15 t required space: 4x6x3.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length - max.: 3000 mm feed length: - mm length: - mm power capacity: 2 kW Weight: 1300 kg With control panel HBG 10 A guide channel, size of approx. 60 mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

roller conveyor 2200-640-600 RA2292 Make: Blume Roller width (RB): 600 mm Nominal/outer width (NB): 640 mm Length: 2200 mm Roller diameter: 50 mm Roller distance: 100 mm Motor Roller conveyors: no motor Height frame: 60 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 660 Roll width in mm: 600 Roll division in mm: 100 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 125 mm -Type: B2-50/32x125 TGL10906 -Piston rod: Ø 32 mm / M18 -Holes: Ø 30 mm -Dimensions: Ø 80 x 375 mm -Weight: 6.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 630 mm -Type: B1-50/32x630/0 TGL10906 -Piston rod: Ø 32 mm -Dimensions: 805/115/H115 mm -Weight: 13.4 kg

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

This geared motor is manufactured by Muller Martini Weiterverarbeitungsmaschinen, under item no. 3672.1797.2. The price is CH 3000.- at Muller Martini.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke mm -Piston rod: Ø 14 mm -Holes: Ø 12 mm / Distance: retracted 323 mm -Dimensions: 370/73/H75 mm -Weight: 2.4 kg

For sale are intercoolers from a Mitsubishi S6R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: 1A17031D Part Number: 37555-11200 Suitable for: S12R S6R S6R2

Carrier 30AWH012HD9 & 30AWH015HD9 Heat Pump Heating power: 12kW/15kW Power Cooling: 13.5kW/16kW Refrigerant: R410a Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 300 mm -Type: J-3LRLS33M -Piston rod: Ø 35 mm -Bore: 82.6 mm -Dimensions: 550/140/H95 mm -Weight: 13.4 kg

Key data: 2000 KW, 2500 kVA, 11000 V

UNUSED CAT 3520-C 2000 KW 2500 KVA 11.000VOLT 50HZ 1500RPM NATURAL GAS 0-Hours Never installed! UNUSED GENSETS! Genset located in our warehouse in the Netherlands: Kranenpool 10 6443VA Brunssum NL generalpowerholland.nl +31681163153

Key data: 2000 KW, 2500 kVA, 11000 V

2x Unused caterpillar 3520 C 0 hours (never installed) 2000kw 2500kva 11.000 volt Located in our warehouse in the Netherlands: Kranenpool 10 6443VA Brunssum NL generalpowerholland.nl +31681163153

Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Hydraulic motor power: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, Tall: 1.900 mm, Weight: 6.420 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 630 mm -Type: S2-50/32x630 /0 TGL10906 -Piston rod: Ø 32 mm -Dimensions: 805/115/H115 mm -Weight: 13.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 220 mm -Art.No.: 171 CO 33M -Piston rod: Ø 32 mm / M24 -Dimensions: Ø 125 x 430 mm -Weight: 17.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 40 mm -Type: 3003284-1 1-5 -Piston rod: Ø 32 mm / M22 -Hole: Ø 18 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 82 x 330 mm -Weight: 5.7 kg/piece

diameter: 315 mm bore diameter: 91 mm turning speeds: 4000 U/min weight of the machine ca.: 72 kg Like new 2 Jaw power chucks, - Quick change system - 1 set ground jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 300 mm Number of rollers: 2 St. Feed speed: 20 m/min. weight: 300 kg Dimensions (L/W/H): 4000x600x1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workshop overhauled 2024, ready-to-use DISKUS Doppelplan grinding machine, Lower grinding spindle renewed 2024 Machine No. 7078 Specifications: Grinding spindle 2 pieces vertical Workpiece width 5 - 30 mm Max. workpiece height 10 mm Grinding wheel diameter 300 mm Dimensions of grinding tools Ø 300 x 50 x Ø 75 mm Rotational speed grinding wheel 18 m/s Speed 1150 rpm Lower grinding spindle frequency-controlled Machine weight approx. 2.3 t Accessories: IONIC process control, FAUDI water basin with magnetic separator Replacement flanges, transport washers The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

Product number: 3040 Type: 3000/1100 MG Serial number: S107 Year of construction: 2004 Hole plate diameter: 11 inch, +/- 280 mm Mixer: 3000 litres, double paddle mixer Infeed height: 2500 mm Outfeed height: 760 mm Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 120kW Dimensions: 4000 x 2000 x 3200 mm Including tool trolley

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3

Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator, coolant cooler -Manufacturer: AVA, water cooler for BMW 3 Series unused OVP -Type: BW2081 -Dimensions: see photos -Carton dimensions: 660/140/H430 mm -Weight: 4.6 kg

Product numbe:r: 3041 Type: 3000/1100 MG Serial number: S106 Year of construction: 2004 Hole plate diameter: 11 inch, +/- 280 mm Mixer: 3000 litres, double paddle mixer Infeed height: 2500 mm Outfeed height: 760 mm Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 120kW Dimensions: 4000 x 2000 x 3200 mm Including tool trolley

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3

Used matrix with a capacity of 300 litres, acid-resistant design. Mixed cream or gel masses. Motor power 0.4 kW. Weight 260 kg.