sv 3 maxi used for sale

Tow hitch, trailer coupling, jaw coupling -Manufacturer: AL-KO, axle braked -Type: B 2000-4 -Brake: Type 3081 A -Brake drum: Ø 325 mm Recess Ø 160 mm / Bolt circle Ø 205 mm -Dimensions: see photos -Transport dimensions: 1750/660/H340 mm -Weight: 134 kg

Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber wheel, solid rubber band with steel band, 2 pieces -Tire size: Ø 310 mm -Inner diameter: 203 mm -Delivery/Price: complete -Dimensions: Ø 310 x 70 mm -Weight: 6 kg/pc.

Display, display module, display panel, multifunction counter, controller, bidirectional counter, preset counter, digital counter -Manufacturer: IVO, Multifunction Digital Counter with 6-digit LED Display -Type: N 214.002AX01 -Item No.: 300949 -Dimensions: 130/110/H50 mm -Weight: 0.4 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum ...

AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronou ...

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 380 mm -4 jaw chuck -threaded mount -Weight: 40 kg

tapered roller bearings -Outer diameter: 80 mm -Width: 18 mm -Inner diameter: 40 mm -Weight: 0.5 kg

Collator tb sprint B 312 VP 12 Station variable pile up to 30 cm formats: max. 35 x 65 cm, min. 6.5 x 10 cm paper weights: 20 to 1000 g/m² speed: up to 3300 cycles/h current: standard 400 V, 50 Hz, 3/N/PE additional equipment: • single sucker- and -blower valves, individually adjustable • controlled blast and separating air • missed sheet detector, photo electric, each station • double sheet detector electromechanical at the delivery • paper jam detector over transport table • lighting of transport table • hand feeding station right • delivery jogger for normal- and criss-cross-delivery, selectable by switch • total- and preselection batch counter • SPS programme control with - Touch Screen - missed sheet repeat without machine stop with the next cycle - ejector, faulty sets are separated while running, max. set thickness 4 mm - programmable, au ...

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 40 mm -Outer diameter: 68 mm -Width: 19 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 90 mm -Outer diameter: 160 mm -Width: 32.5 mm

tapered roller bearings -Weight: 1511 g -Outer diameter: 120 mm -Width: 33.35 mm -Inner diameter: 65 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 70 mm -Outer diameter: 125 mm -Width: 33.25 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 65 mm -Outer diameter: 120 mm -Width: 32.75 mm -Weight: 1.6 kg

Key data: 3560 mm, 2466 , 1800

Machine type: EVP 3000 Manufacturer: ERBA Power kW: 15 Total volume: 3000 lt. Description: The EVP 3000 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size m ...

Key data: 670 mm, 1500 , 1125

Machine type: EVP-A 350 Manufacturer: ERBA Power kW: 2.2 Total volume: 350 lt. Description: The EVP-A 350 vibratory finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. ...

USED TETRA PAK TPA 19 330ML PRISMA FILLING LINE FOR SALE YEAR 1998 Item #: Usm-214 Category Tetra Pak TBA 19 TPA 19 330ml Prisma Filling Machine, Version 10v, Working Hour 20500, Year 1998 Tetra Cardboard Packer 70, Year 1998 Easy ride Conveyors and Paper trolly Condition: Good

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 45 mm -Outer diameter: 85 mm -Width: 20.75 mm

tapered roller bearings -Weight: 1350 g -Outer diameter: 130 mm -Width: 29 mm -Inner diameter: 85 mm

tapered roller bearings -Weight: 7250 g -Outer diameter: 230 mm -Width: 40 mm -Inner diameter: 130 mm

tapered roller bearings -Weight: 3780 g -Outer diameter: 180 mm -Width: 34 mm -Inner diameter: 100 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 60 mm -Outer diameter: 110 mm -Width: 29.75 mm -Weight: 1.3 kg

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

SPECIFICATIONS: Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm Intake manifold: Ø 200 mm For the shredding of the following wood waste: - MDF strips - Pressed chipboard -Plywood -Cardboard EQUIPMENT: Motorized carpet: 11000 x 330 mm

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg

Machine vice, vise -Jaw width: 310 mm -Jaw height: 180 mm -Clamping depth: max. 495 mm -Weight: 150 kg

Cylindrical roller bearings -Outer diameter: 130 mm -Width: 31 mm -Inner diameter: 60 mm -Weight: 1.9 kg -Number: several available

Cylindrical roller bearings -Outer diameter: 140 mm -Width: 33 mm -Inner diameter: 65 mm

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Technical data of the pallet rack crossbar: Shelving system: Arestant Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Truss Type: 10515CN Agraffe: 4 HK (hooks) Clear width: 3,300 mm max. load per pair of trusses 1,500 kg, with the same. distributed load. ( Observe field load ) 02x Safety pins, new Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic , Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Cylindrical roller bearings -Outer diameter: 150 mm -Width: 35 mm -Inner diameter: 70 mm

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

TBT M1-4-320, 4-Spindle deep hole boring machine, gun drilling, interesting price, Mimu Machine Tools (Italy)

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 199 mm -Drum length: 384 mm -Speed: 2800 rpm -Power: 2.2 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 67 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 198 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 5.5 kW -Shaft mount: Ø 32 mm -other sizes also available in stock -Number: 14 engines available -Price per piece -Weight: 87 kg

Roller conveyor, roller track, roller track -Roller width: 630 mm -Conveyor length: 3400 mm -Roller diameter: 50 mm -Height: 350 mm -driven: via flat belt -Dimensions: 800/4100/H350 mm

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

mobile welding fume filters, welding fume extraction -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

Honing machine, SUNNEN EC3500, (like ml3500 ml5000 ml2000), SOLD - contact us for alternatives e.g. ML3500 o ML2000, complete electronic retrofit (Siemens / Telemecanique), Touch screen. Loader interface possible

KNOLL Chip Conveyor + Coolant Tank for DMU 200 TYPE: 375 S-2/100 TOTAL LENGTH (mm): 4350 TOTAL WIDTH (mm): 1180 BELT DIMENSIONS (mm): 1840 x 375

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Key data: 1045 KW, 600 V

Surplus/Never used, Zero Hours, Caterpillar 3512C, Land Drill Module 1045 kW Prime Power, 600v, 1200 RPM, 0.733 P.F. with Jacket Water Heater, Air Cleaners, Radiator 46/CVS, 12" Spark Arrester Muffler, EMCP Control Panel, Simplex Oil Filter, designed for Petro Drilling applications, zero hours, from year 2015.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.