138,066 used machines on RESALE, but how to find them? Machine Search
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,44 t dimensions of the machine ca.: 0,8 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 330 mm : 450x320 saw band length: 4250x34x1,1 mm band speed: 40 + 80 m/min table height: 845 mm saw band width: 34 mm total power requirement: 2,2 kW weight of the machine ca.: 0,985 t dimensions of the machine ca.: 1,4 x 2,0 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 2600 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-104-30CE Truss length: 2700 mm Load capacity: 2600 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...
table length: 820 mm table width: 520 mm stroke height: 730 mm weight max. in kg: 300 kg : 260 mm weight of the machine ca.: 0,065 t dimensions of the machine ca.: 1,0 x 0,6 x 0,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mm saw band length: 3320 x 27 x 0,9 mm table height: mm band speed: 40/80 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 355 mm : 350 x 350 mm saw band length: 4640 x 34 x 1,1 mm band speed: 15 - 115 m/min total power requirement: 5,5 kW weight of the machine ca.: 2,8 t dimensions: 3,2 x 2,2 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15 - 90 U/min total power requirement: 3,0 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 1500 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-084-30CE Truss length: 2700 mm Load capacity: 1500 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...
saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 85 mm capacity 60 degrees: flat: 90 x 80 mm clamping range: 130 mm turning speeds: 30 / 60 U/min dimensions of saw-blade: 350 x 32 x 2,5 mm total power requirement: 1,1 / 2,2 kW weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1200 x 860 x 900 m Special price: instead of 3997, -EUR now 3399, -EUR Manual miter saw for miter cuts from 45 ° right to 45 ° left, with high sawing performance. Made of robust cast iron, practical and safe for every cut. Basic equipment: externally adjustable coupling Locking device with a vice Can be moved on a prismatic guide with an adjustable bar Fixed clamps of the vice with axial adjustment for clamping the workpiece in the immediate vicinity ...
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 10/95 mm capacity 45 degrees: flat: 135x60 mm engine: 2,5 0: 1700 / 3400 U/min weight of the machine ca.: 600 kg dimensions: 2,0 x 1,5 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 940 mm total power requirement: 1,5 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1x as good as new GAI 3030P filling block 16 digits, with BVS capper & natural corker built in 2011 1x GAI 3030P – in TOP condition. Year of construction 2011, filling capacity up to 3000 bottles possible. 16 filling stations, vacuum filler or with light back pressure Switching for cork and BVS external cork feeder external BVS feeder Moulded parts for all common bottle sizes Level regulation and frequency-controlled pump (keeps the filling level constant) CO2 level pusher before sealing Jam sensor in the spout Vacuum corker The machine is visually and technically in TOP condition. All maintenance is carried out regularly. Due to conversion to a mobile system. Price: €87,500 plus VAT ex Rheinhessen location The new price of this system today should be 135000€, list price!)
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm : 180 x 100 mm Working height: 925 mm saw blade turning speeds: 15 - 150 U/min total power requirement: 5,5 kW weight of the machine ca.: 0,615 t dimensions of the machine ca.: 1,4 x 1,4 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 355 mm : 350 x 350 mm saw band length: 4640 x 34 x 1,1 mm table height: mm band speed: 15 - 115 m/min total power requirement: 4,0 kW weight of the machine ca.: 2,8 t dimensions: 3,1 x 2,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,210 t dimensions: 0,9 x 1,4 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the light raverse: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: 01x Longitudinal bandage, used Designation: BL 3 Overall length: 1,310 mm Profile dimensions: L 42 x 44 mm Material colour: sendzimir galvanised Note: for use in PR 600 & WR 600 shelf stands in Connection with R3000 shelves Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm Control: Typ 840 D sl total power requirement: 51 kW weight of the machine ca.: 86 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W Manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build space: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions 95 x 70 x 136 cm - Weight 188 kg 3D, 3D Printer, 3D Printer, Agi ...
turning diameter over bed: 920 mm turning diameter over slide rest: 600 mm turning length: 12000 mm loading capacität: 20 tons turning speed range: 3,6 - 172 U/min volt: 380 V total power requirement: 90 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm total power requirement: 37 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Textile cleaning machine Multimatic PIUMA N 320 with distillation module VD 160 Commercial washing machine, used from 2019 Manufacturer: Multimatic GmbH & Co. KG, Maschweg 72-74, 49324 Melle, Germany, e-mail infomultimatic.de, Tel. +49 5422 100-0 Year of Make: 2019 Operating hours read: 4,854 Batches read: 5,923 Description For solvents trade name "Sensene" Drum volume: 320 liters Filling quantity: 16 kg with a filling factor of 1:20 Easily accessible, compact machine platform Basic machine/basic module (W x D x H in mm): 1076 x 1990 x 2140 (990 x 1990 x 1980 mm simply dismantled) Machine structure: - High-spinning, free-swinging drum unit - Resonating tank assembly, consisting of 2 stainless steel tanks with a volume of 80 and 90 litres, to compensate for the kinetic energy during spin-up and to prevent dirt deposits - Tank bottom with double slope - High-quali ...
The DMG 3Decure post-exposure unit is used for the professional curing of 3D-printed components and ensures improved material properties through optimized UV aftertreatment. Thanks to its precise control, it enables uniform curing and thus ensures higher mechanical stability and surface quality of the manufactured parts. Particularly suitable for industrial applications in additive manufacturing. Properties: - Fully automatic material curing programs - Integrated 6-inch touchscreen - Network connectivity - Easy calibration with ACCS sensor to ensure instrument function - 360° UV illumination for even curing Specifications: - Power: 160 W - Voltage: 24V - Interfaces: LAN, USB, On/Off - Dimensions: 23 x 38 x 27 cm - Weight: 12 kg Condition: very good condition Manufacturer: DMG Dental Material Gesellschaft mbH Elbgaustraße 248 22547 Hamburg Germany Phon ...
Centrifugal fan / blower / fan Hürner-Funken made of chemical-resistant plastic The housing and impeller of the fan are made of chemical-resistant plastic and suitable for aggressive media in the process exhaust air. Manufacturer Hürner-Funken GmbH 35325 Mücke-Atzenhain Type 16-RU 315 MN/0/1420 Factory No. 2-29191/00 Built in 1999 Air capacity / volume flow 2166 / 1900 m³/h Motor power 1.50 KW, 1619/1420 rpm. Pressure difference 1287/990 Pa Conrad Meisenheim electric motor Type DR 90 L-4 No. 304987 1.5 KW, 400/230 V star/delta, 3.4/6 A, 50 Hz Iso F, IP55 1420 rpm, cos phi 0.82 Chemically resistant, corrosion resistant. The centrifugal fans made of plastic are specially designed for pumping chemically aggressive exhaust air. They are characterized by the highest corrosion resistance. In addition, they achieve high volume flows and Pressure differences wit ...
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 35mm total power requirement: 45+22 kW weight of the machine ca.: 35 t dimensions of the machine ca.: 5684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 40mm total power requirement: 2x37+30 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6085 x 2630 x 2787mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 50mm total power requirement: 45+45 kW weight of the machine ca.: 72 t dimensions of the machine ca.: 6370 x 3240 x 3660mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 10mm total power requirement: 15 kW weight of the machine ca.: 10,6 t dimensions of the machine ca.: 5310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 77 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 6000x5000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimension: Width: approx. 1,350 mm Height: approx. 938 mm Depth: approx. 820 mm The scope of delivery includes: 02x Workbench stand, used Material colour: sendzimir galvanised Stand height: 900 mm Stand depth: 800 mm Stand profile: 100 x 100 x 3.00 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss Type: BX100/50/15 Clear width: 1,140 mm 08x Safety pins, used Design: completely galvanized 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,350 mm Particleboard depth: 820 mm Particleboard one-piece 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,120 mm Partic ...
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 30 kW weight of the machine ca.: 18,3 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 55+15 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 3850x3050x82800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6mm total power requirement: 11 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4880 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 22 kW weight of the machine ca.: 16,65 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
external diameter: 762 mm internal diameter: 304,8 mm width: 36 - 42 - 64 mm Unused grinding wheels Ø 762x304,8 mm! 2x36 mm width Norton 1x64 mm width Norton 1x42 mm width Krebs 4x64 mm width Krebs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting range: 90°: 90 mm cutting range: 45°: 75 mm Saw blade diameter: 315 mm Table dimensions: 800 x 500/400 mm Saw blade: 30 mm machine weight ab.: 45 kg dimensions: 850 x 600 x 430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 300 mm width: 150 mm height: 90 mm voltage: 24 V weight of the machine ca.: t dimensions of the machine ca.: m Power connection 24V / 2,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimension: Width: approx. 1,350 mm Height: approx. 938 mm Depth: approx. 820 mm The scope of delivery includes: 02x Workbench stand, used Material colour: sendzimir galvanised Stand height: 900 mm Stand depth: 800 mm Stand profile: 100 x 100 x 3.00 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 02x Workbench trusses, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss Type: SLO89|2 Clear width: 1,140 mm 04x Locking pins, used Design: completely galvanized 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,350 mm Particleboard depth: 820 mm Particleboard one-piece 06x Self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The pict ...
saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Corundum disc mill Manufacturer: FrymaKoruma Type: MK-360/B Item #: 101031 Year of construction: 2007 Power: 45 kW Pressure product space: 4/3 bar Pressure double jacket: 6 bar Weight: 670 kg new grinding discs installed with control cabinet with double-acting mechanical seal various spare parts LBH: Mill: 1150 x 650 x 600 mm Control cabinet (large): 1000 x 290 x 1220 mm Control cabinet (small): 400 x 300 x 200 mm
For sale:Micro Motion MASS flow sensor Type: CMF 200 ANSI 300 LBS Exclusive channel Order number: 8000.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.
grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kontron 325 Tenar Low Pressure Gradient Pump Pump HPLC up to 10mL Pumping System -Pump system for tenary low-pressure gradients -All devices for low-pressure gradients integrated in one solution system -10 programs with individual instructions -Column Shock Protection extends durability-Intelligent commissibility compensation -Stackable with other/other HPLC modules -Full control of the AUtosampler 360 via the keyboard with a display Type: double series piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby and sapphire Flow: 0.05 to 10 mL per minute Flow Rate Precision:
maximum number of results exceeded
please refine your search
