surface heat used for sale

Manufacturer: Wagner Type of machine : Powder Coating System Year of Manufacture: 2000 The powder system consists of the following individual components: - 1x Powder coating booth – FBC – plastic booth with discharge conveyor - Cabin extraction system – 1x monocyclone 1x closed post-filter - 2x powder collection containers - 1x Powder Center - PZ - 2008 with its own extraction system - 8x Automatic Powder Guns – PEA – T2 - 2x hand powder guns – PEM – T2 - Control unit for automatic pistols – 8x PM 401 pneumatic module 1x PG 650 control module - 2x Control for handguns – EPG – 2007 in Tribo mode - 2x lifting devices – EBA – 3 - 2x electric sliding unit – VT – 1400 - Light strips – height + gap + depth - 1x external safety device – fire detection (Minimax company) - Find more here - .ucymachines/ Contact us at - sales@ucymachines

AD planing machine Hammer A3-41, year 2001, less good condition, incl. driving device, impeller is worn, 4 kW S6, 1700 mm table length, 410 mm table width, 3 knives, 360 kgPrices subject to change, errors, printing and typesetting errors excepted

With strip blade, slightly usedSurface planer:Table dimensions 1800 x 410 mm, Max. chip removal 5 mm, Planer shaft diameter 100 mm, Number of planer blades 4 pieces,Thickness planer:Table dimensions 700 x 406 mm, Max. chip removal 4 mm, Feed speed 8m/min, Motor output power 5 kW S6 400V (4kW S1), Weight, 450 kg

Demonstration machineYear of construction 2022The new FSN dressing thickness planer is characterized by its stable design, the strong machine casting tables with a ground surface and modern handling. The machine is space-saving and extremely convenient when changing from dressing to thickness. The solid guide of the thickness table ensures the best planing quality.A mechanical digital display ensures perfect reading of the thickness height.CE compliant, 100% Made in EU (developed, built, quality tested)

Exhibition machineThe DMA41L surface planer is characterized by its sturdy construction, strong machine casting tables with ground surface and modern handling. The dressing fence is 45 swivel. CE compliant, made in EU! Technical data:Table dimensions 2600 x 410 mmMax. Chip removal 8 mmPlaning shaft diameter 125 mmPlaning shaft speed 4700 rpmNumber of planing blades 4 piecesPlaner knife dimensions 410 x 35 x 3 mmMotor output power 5.5 kW -S6 (4kW S1)

Exhibition MachineProfessional Wood Professional Commercial and Industrial Surface Planing Machine for Professional Use. The machine is characterized by its stable construction and good operability. CE-compliantTechnical data:Dressing table length 2750 mmDressing table width 550 mmPlaning width 530 mmPlaner blade 4 pcs 550 x 35 x 3 mmKnife shaft 120 mmChip removal max. 7 mmLength stop ruler 1300 mmMotor output power S1 4 kW, 400 VAnflung swivel 0-45Suction connection 150 mmWeight 570 kg

AD planing machine Holzprofi FS41N all incl. very good condition, incl. reversible blade, 2 speeds and feed 6/12 m, 4 kW, 1850 mm table length, 410 mm table width, 4 knives, approx. 470 kgPrices subject to change, errors, printing and typesetting errors excepted

Technical data:Total table length 2350 mm, thickness table length 1000 mm, stop ruler 1500x180 mm, knife shaft diameter 120 mm, number of knives 4, knife length 550 mm, dressing stop swivel 90 - 45, feed speed 6/12 m/min, max. chip removal 6 mm, motor output power 5.5 kW (7 kW S6), weight 920 kg, with automatic star delta switching.Options: - Motor output power 7.5kW (9.5 kW S6)- electric table lift; - 2 under-table roller - Digial height display of the thickness table - Knife adjustment gauge

This 3-axis JUNKER QUICKPOINT 5002/10 was manufactured in 2002. It features a Siemens control system, Marposs measuring, and CNC-controlled Z-axis and grinding spindle head. With a grinding length of 1000 mm and a diameter up to 280 mm, its ideal for precision surface grinding. Consider the opportunity to buy this JUNKER QUICKPOINT 5002/10 surface grinding machine. Contact us for more information about this machine.

This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information.

Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine -Manufacturer: Finke, horizontal surface grinding machine with magnetic plate -Magnetic plate: 550 x 200 mm -Traverse paths: x 500 mm / y 260 mm / z 260 mm -Drive: 1.5 kW -Grinding wheel: Ø max. 200 mm -Dust extraction device -Transport dimensions: 1950/1300/H1590 mm -Total weight: 1108 kg

Pendulum grinder, vertical grinder, swivel arm vertical grinder, surface grinder, grinder, l, surface grinder, magnetic grinder, surface grinder-vertical, cup grinder -Manufacturer:Lomefa, cup grinder -Grinding height: max. 235 mm -Grinding wheel: Ø 200 mm -Work table: 285 x 200 mm -Drive: 1.1 kW -Accessories: including grinding wheels, see photo -Total dimensions: 1160/650/H880 mm -Total weight: 208 kg

This 3-axis WALDRICH COBURG 30-15 S 2525 grinding machine was manufactured in 1991. It features a robust structure with dimensions of 11,500 x 6,610 x 5,170 mm and a weight of approximately 45,800 kg. Capable of handling workpieces up to 11,000 kg, it offers a grinding length of 3,500 mm and a grinding width of 1,450 mm. If you are looking to get high quality grinding capabilities consider the WALDRICH COBURG 30-15 S 2525 machine we have for sale. Contact us for more information.

This ACRA CHALLENGER ASG-1632HS was manufactured in 2006. It features a robust hydraulic surface grinder with a table surface of 800 x 400 mm and a maximum table weight of 400 kg. Equipped with a variable electro-magnetic demagnetizing table and a 2-axis SONY DRO for enhanced precision. Very good condition. Contact us for more information about this machine.

Surface grinder, grinding machine, horizontal surface grinder, surface grinder, magnetic grinder -Manufacturer: aba Abawerk, surface grinding machine-horizontal type FFK with magnetic plate -Magnetic plate: 360 x 122 mm -Traverse paths: x 390 mm / y 170 mm / z 260 mm -Drive: 2.0 kW -Grinding wheel: Ø170 mm, max. 245 mm -Coolant device -Transport dimensions: 1120/1100/H1630 mm -Total weight: 604 kg

This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information.

This 3-axis ROSA ERMANDO STEEL 11.7 CN was manufactured in 2000. It features an ECS 2401 control system, a grindable size of 1,000 x 750 mm, and a grinding height of 600 mm. The machine can handle a table load up to 1,400 Kg and offers a longitudinal speed of 1–38 m/min. Consider the opportunity to buy this ROSA ERMANDO STEEL 11.7 CN surface grinding machine. Contact us for more information about this machine.

Safety switch, Safety Switch, Magnetic door contact safety switch, Surface magnet, Electromagnetic locking system, Electric door opener -Manufacturer: BSW, surface magnet door contact safety switch Ovp -Type: EF150UPCTC -Operating voltage: 12/24 V -Number: 2x electric door openers available -Price per piece -Dimensions box: 280/95/H40 mm -Weight: 1,3 kg/piece

Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine, magnetic grinding machine -Manufacturer: Blohm, surface grinding machine-horizontal -Table size: 770 x 140 mm, swiveling -Travel paths: x 490 mm / y 200 mm / z 220 mm -Dimensions: 1030/870/H1510mm -Total weight: 403 kg

Color: RAL 7035 light grey, RAL 7012 basalt grey, RAL 5012 blue grey, the machine’s inverter is defective. Accessories: electromagnetic clamping plate 400x250mm, with pole pitch 5mm and holding force control, automatic vertical infeed with infeed program and digital display for vertical and cross movement, automatic central lubrication system, wet grinding unit with paper belt filter system for filter paper 460x200mm with filter fineness 0.016–0.025mm, electric wheel dresser with dimensional compensation and operating manual. An on-site inspection is possible.

This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details.

This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine.

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 150 mm -Conveyor length: 770 mm -Drive shaft: Ø 30 x 150 mm Dimensions: see photos / technical drawing -Dimensions: 875/400/H300 mm -Weight: 60 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Feed belts: 3 pieces, length 1840 x 30 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 1840/570/H285 mm -Weight: 129 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 100 mm -Conveyor length: 650 mm -Drive shaft: Ø 30 x 100 mm -Key width: 8 mm -Dimensions: 650/520/H250 mm -Weight: 51 kg

Key data: 510 mm, 2500 mm, 4 St.

Martin T51 Surface Planer – Classic from the 60s | 4-Knife Shaft | overhauled at handover For sale is a Martin T51 surface planer, a real German machine classic from the solid cast iron era of the 60s. These machines stand for extremely smooth running, precision and durability – exactly what many modern machines often no longer deliver. ⸻ Technical data & equipment: • Model: Martin T51 • Year of construction: approx. 1960s • 4-knife shaft • Solid cast design • Precise dressing tables with good flatness ⸻ Condition: • Machine has been tested • Technically fully functional • Signs of wear due to age (purely visual) New knives are used at handover → ready for immediate use Approx. 1200 KG - Forklift available for loading.

rotary table diameter: 600 mm grinding height: 600 mm grinding head - power requirement: kW workpiece weight: 300 kg grinding wheel diameter: 600 mm power spindle motor: 15 kW grinding height: 600 mm Control: SIEMENS STC weight of the machine ca.: 19 t dimensions of the machine ca.: 4,7 x 3,6 x 2,5 m Equipment & Accessories ? Wet grinding unit with universal paper belt filter, discharge container and magnetic separator, tank capacity approx. 500 l ? Electrical cabinet with digital drives SIMODRIVE 611D ? Coolant Mist extractor ? Recooling unit for grinding spindle motor ? Fully closed machine enclosure ? Central lubrication ? Swivebale Control Panel with SIEMENS Simatic 10” Touch HMI mounted at front of the machine ? Electro-permanent magnetic plate Ø 600 mm with 4mm pitch, absolute accuracy due to lack of heat, incl. Adhesion control (30-100%), autom. magnet pole switching via push b ...

Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.

Grinding length: 1500mm, grinding width: 400mm, max. working height: 500mm, vertical movement: 520mm, table dimensions X/Y: 1600mm/350mm, table longitudinal movement: 2050mm, grinding segments: 12, grinding segment dimensions X/Y/Z: 80mm/25mm/150mm, machine dimensions X/Y/Z: approx. 6100mm/2400mm/2250mm, weight: approx. 8500kg. Documentation available. An on-site inspection is possible.

voltage: 380 V connected load: 7,5 kVA dimensions: 2725 x 1930 x 1773 mm weight of the machine ca.: 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - ...

Manufacturer: Heiche Sachsen GmbH & Co. KG, Leisnig, Germany Model: HEIS05 Year of manufacture: 2003 Major refurbishment: 2013 to 2018 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 2,200 x 700 x 350 mm - Max. workpiece carrier weight: 750 kg - Coating material: Aluminium - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 15,000 x 3,000 x 4,000 mm - Number of baths: 24 - Number of dryers: 2 - Number of loading/unloading stations: 2 - Transport system: 2 carriages Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Control voltage: 24 V DC - Total installed power: 190 kW - Total fuse protection: 224 A - Pneumatic pressure: 7.5 bar - City water consumption: 150 l/h - Demineralised water consumption: 150 l/h a ...

ELB ELB Super Rubin 020 VA II CNC surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth control Magnetic Table 600 x 300 mm Movements axis X/Y/Z: 650/300/250 mm 4th axis- rotational Grinding wheel: -Dia 300 mm -width 40-50 mm -bore size 76,2 mm Spindle speed 1400-2800 rpm Total power requirement 5,5 kW Weight of the machine ca. 3,4 t 4th axis devices: -Punch former PF350 V-block -Punch former PF650-ER20 -Punch former PFD-ER40 -Punch grinder PGAS- centreless Accessories: Collets Radius and angle dresser RDC Sinusoidal-table for devices SPF 50 Balancing rack for wheels LBS 14 surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth c ...

Qty. 1 Second-hand Slab Surface Scalper Mfc.: TBA Built: 1972 Scalped Slab Dimensions: 1000-3000 x 740-2000 x 180-350 mm – L x W x T Main Drive Electric Motor Power: 250 kW, 380 V, 735 RPM Scalping depth at once: 4-5 mm Capacity: Average 7 tons/h (For 1040 mm width slab)

Table dimensions: 1800 x 550 mm, Magnetic table: SELTER SN 5536, Dimensions of the magnetic table: 1210 x 610 mm, Grinding dimensions: 1200 x 550 mm, Maximum transverse movement: 500 mm approx., Maximum grinding weight: 1200 Kg

Key data: 410 mm

SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50

A surface grinding machine is offered. Horizontal grinding spindle, ball-bearing mounted, dual system, hydraulic: infinitely variable table speed, manual: handwheels for individual parts and fine adjustment, flat or V-guides. Inspection possible by appointment.

Number of axes: 3, operating hours: unknown, with control system, belt filter, and extraction unit, without documentation or spare parts, not maintained on a regular basis, without maintenance records. An on-site inspection is possible.

Surface grinding machine manufactured in 2003. This DEGEN FS-S3060 features an X-axis travel of 600 mm and a Y-axis travel of 300 mm. It has a table size of 600 × 300 mm and a maximum load capacity of 300 kg. If you are looking to get high-quality grinding capabilities, consider the DEGEN FS-S3060 machine we have for sale. Contact us for further details.

Blanchard dia 900 mm Magnetic table dimensions: die 900 mm Motorpower: 25 HP Length : 3300 mm Depth: 1180 mm Height: 3100 mm Weight: 6 ton

Manufacturer: Sidasa Type of Machine : ZT100+ Centrifuge System Year of Manufacture: 2017 Application: Zinc Flake Coating for Bulk Small Parts Includes: Associated Dryer CE Certified Technical Specifications - Maximum Coating Capacity: 7.5 tons per hour Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 3-axis EASTAR ESG-1640ASD II surface grinding machine was manufactured in 2008. It features a substantial work plane of 400 x 1000 mm, ideal for various grinding tasks. If you are looking to get high-quality grinding capabilities, consider the EASTAR ESG-1640ASD II machine we have for sale. Contact us for more information.

Manufacturer: Heiche Model:HEIS01 KTL system Year of manufacture: 1982 Major overhaul: 2008 to 2013 Status: Fully operational Control system: Siemens S7-300 Operating software: Ditec Operating modes: Manual, jog, and fully automatic Technical Specifications - Max. workpiece window: 1,240 x 800 x 600 mm - Max. workpiece carrier weight: 160 kg - Coating material: KTL paint (cathodic electrodeposition) - Coating thickness: 10 to 45 micrometers - Cycle time / throughput: 190 seconds per cycle (18 workpiece carriers per hour) - Noise level: below 85 dB(A) - Overall dimensions (L x W x H): 9,000 x 12,000 x 7,000 mm - Number of baths: 15 - Number of loading and unloading stations: 6 - Conveyor system: Chain conveyor by KEWESTA - Dip system: Lifting station by Klaus Sessler - Drying: Curing oven by Rippert Electrical and Utilities Data - Supply voltage: 3-phase 230/400 V / 50 Hz - Con ...

serial number: 208892 control: Siemens 611 weight: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part number 7987 SPECIFICATIONS - shaft width 500mm - number of knives 4pcs - max thickness of the workpiece 230mm – in advance: - latches - toothed, pulling, torsional introductory shaft - pressure - planing shaft - pressure - smooth pulling shaft - 4kW motor - electric lifting of the table top - 2 types of feed speed 8/12.5m/min - dimensions l/w/h 1000x1000x1050mm - weight 620kg ADVANTAGES – Italian production – thickness sheet used, very good condition Net price: 14900 PLN Net price: 3548 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Sturm Coating System Description: For sale is a used coating plant from the manufacturer Sturm, formerly used at the Mercedes-Benz plant in Hamburg for the machining of rear axle beams. Technical data & scope of delivery: Manufacturer: Sturm (plant) / KUKA & Yaskawa (robot) Year of construction main plant: 2019 Former operation: 3-shift (age-appropriate condition) Plant components: Aggregates, dryer and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several replacement KUKA robots (models KR 210L 150-2 / KR 210 2, model years 2006–2012) Related Robot Control Cabinets 2x Yaskawa Robot EPX 2900 1x Thermal aftertreatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to plant maintenance, it is state-of-the-art Electrics & mechanics: Mostly in an age-appropriate or good con ...

EMCI, Explo 750T, Weight: 3800 kg, Dimensions: 450 x 150 x 235 cm, Drive: 75 HP diesel engine, Drill motor:, -Rotation speed 260 RPM, -Power: 3200 Nm, Pull-up/pull-down: 2500 kg-2500 kg, Comes with 32 x 3-meter drill pipes (96 meters), 1 x 250 mm drill bit, 1 x 300 mm drill bit, 1 x 200 mm drill bit, 1 x 150 mm drill bit, 1 x 400 mm auger drill bit., , = More information =, , Type of fuel: Diesel, Year of manufacture: Jun 2008, Model year: 2008, Power: 55 kW (75 HP), GVW: 3.800 kg, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dri ...

Open-face drilling machine from Schmidt Kranz & Co GmbH, Reliable German quality, This open-face drilling machine is designed for drilling with the Open-Front Technique, also known as auger drilling. This is a trenchless drilling technique. Trenchless drilling minimizes the impact on the environment and allows work to be carried out under existing structures without excavation., This machine can be used for a wide range of underground infrastructure applications where trenchless construction is required., • Brand: Schmidt, • Type: Open-face drilling machine, • Condition: Very well maintained, • Ready for immediate use, , Accessories, 57 pcs. Casing pipe with internal diameter Ø 350 mm, length 1000 mm, 29 pcs. Auger plus head: 1 MTR Ø 320 mm, 7 pcs. Auger: 1 MTR Ø 350 mm + clamp, 50 pcs. Casing pipe with internal diameter Ø 260 mm, length 1000 mm, 6 pcs. Auger: Ø 240 mm, 37 p ...

Fraste MD/XL , , ENGINE:, type: JOHN DEERE 4045TF275 DIESEL, number of cylinders: 4, displacement: 4.5 L, power: 86 kW, , ROTARY HEAD - , type: R12D100, number of hydraulic motors: 2, number of rotary heads: 2, Torque, speed (motors connected in series):-: 410 kgm(1) - 100 rpm/1’(1), Torque, speed (motors connected in parallel): 820 kgm(2) - 50 rpm/1’(2), , LIFTING SYSTEM, Lifting capacity (up): 5000 kg, Lifting capacity (down): 3500 kg, Stroke: 3500 mm, , CLAMP:, Type: double , Clamp diameter: Ø60÷280 mm, Max. diameter: 280 mm, , HYDRAULIC PULL CYLINDER, Number of cylinders: 2, Pulling capacity (up): 20,000 kg, , WINCH:, 2,000 kg (40 m/1), , Pump (suction pump), BBA - NB140 (350 m³/h, 25 MWC, 105 mm ball passage), , Included with the machine:, 20 drill pipes, length 3 m (60 meters total), , = More information =, , Type of fuel: Diesel, Year of manufacture: 2006, Model year: 2006, ...

Condition: Used, , Manufacturing year: 2012, , Serial nr: 13-10-932, , Engine: Yanmar 3 TNE74-YC, , Hour meter reading: 795, , , , Source Regeneration machine, , , , Tooljoint outer diameter 135 mm, , Inner diameter 100 mm, , Outer diameter 114 mm, , Undercarriage Hinowa”, , Scanreco control system, , , , , , By installing/connecting a submersible pump, pumping is possible at the desired depth; the digital water meter records the flow rate; the hydraulic reel is operable and adjustable., , = More information =, , Type of fuel: Diesel, Year of manufacture: 2012, Model year: 2012, Technical condition: good, Visual appearance: good, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just l ...