surface heat used for sale

Heat exchanger NIKO Capacity: approx. 10.000 bottles/h Bottle types: 0,2 l and 1,0 l Completely stainless steel Welded in one piece Length: approx. 8 m, width: 2,60 m

There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available.

Key data: 48 KW, 60 kVA

Number 007 Generator sets Type: K0363 Engine Iveco Generator LeRoy Somer Power: 60 KVA / 48 KW Hz 50 RPM 1500 IP 21 AVR controller RS 437 Year of manufacture 1989 Hours 237 Accessories: Control cabinet Metrics: L: 2.25m H: 1.50m B: 0.70m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 28 kVA

Dismantled and stored induction hardening system from Steremat Elektrowärme GmbH type EA 15DA-2C-HF turntable with 50 magnetic workpiece holders and a manual workstation, generator from ELDEC type: HFG 15 DA, HF power 15KW, power consumption at full load 18 KVA, frequency range 150 - 350 kHZ

Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW

Equipment: Heatable/coolable, Insulation, Overpressure,Condition: used,Volume: 180.000,Max. overpressure: 1.5,Max. permissible Operating temperature : 18,Lower shelf: cone bottom,Design: hanging,Heating/cooling (filter bar): available,Volume double jacket: 1.462,0,Max. permissible Operating temperature : 20,Temperature control cylinder: half-tube coil,Insulation: available,Diameter inside: 4.100,Diameter outside: 4.500,Cylindrical height: 12.000,Total height: 17.000,Technical documentation: Drawing,Manhole / dome: in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Last use:

Equipment: heatable/coolable, overpressure, vacuum, manufacturer: Schleifenbaum & Weber, condition: used, volume: 49,338, vacuum: 1.0, max. overpressure: 6.0, specific gravity of the medium: 1.5, lower shelf: clapper bottom, upper shelf: clapper bottom, design: upright, stand form: feet, number of feet: 4, heating/cooling (filter bar): available, max. permissible Operating overpressure: 6.0,Max. permissible Operating Temperature : 200,Temperature Control Cylinder: Half Tube Coil,Temperature Control Underbody: Half Tube Coil,Diameter Inside: 2,800,Diameter Outside: 3,100,Cylindrical Height: 7,483,Total Height: 10,000,Wall Thickness Underbody:

Equipment: heatable/coolable, insulation, agitator,Manufacturer: ETA,Condition: used,Volume: 21,940,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Heating/cooling (filter bar): available,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 2,830,Diameter outside: 3,000,Cylindrical height: 3,400,Total height: 5,000,Type plate: Yes,Equipment: Level indicator (without guarantee), Crane eyelets,Outlet: available,outlet : 50,remarks: bottom of the tank and 1/3 of the cylinder temperature-controlled,last use:

Equipment: Heatable/coolable, Insulation,Manufacturer: Apparatebau Nordhausen,Condition: used,Volume: 100,000,Lower shelf: Cone floor,Design: hanging,Heating/cooling (filter bar): available,Volume double jacket: 615,0,Max. permissible Operating overpressure: 2.0,Temperature control cylinder: half-pipe coil,Insulation: available,Diameter inside: 3,190,Diameter outside: 3,440,Total height: 15,970,Technical documents: Drawing,Type plate: Yes,Equipment: Crane eyelets,Outlet: DN80 DIN 11851 ,Remarks: The double jacket (615 liters) is divided into a total of 4 chambers,Last purpose:

Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible.

Stock number: A212, Tube heat exchanger, stainless steel,, insulated., 27 pc Ø 1 product pipe,, 4 m² heating surface., Material: Stainless steel AISI 304

Stock number: A202, Tube heat exchanger, stainless steel,, lying on legs., Ø 1 product tubes,, in total approx. 20m2 heat surface., Material: Stainless steel AISI 304

Stock number: A208, Tube heat exchanger, stainless steel,, 60 pcs. Ø 20 x L 2450 mm. tubes., Estimated 9,23 m2 heating surface,, outer dimensions Ø 350 x L 2700 mm., Material: Stainless steel AISI 304

Stock number: A203, Tube heat exchanger, stainless steel,, 36 pcs. Ø 20 x L 3000 mm. tubes., Approx. 6,78 m2 heating area,, outer dimensions D 375 x L 3050 mm., Material: Stainless steel AISI 304

Stock number: A205, Tube heat exchanger, stainless steel,, approx. Ø 30 mm. spiral tube., Outer dimensions D 260 x L 2810 mm., Material: Stainless steel AISI 304

Stock number: A198, Tube heat exchanger, stainless steel,, insulated, outside rivet cladding., 20,4 m2 heating surface,, calculation pressure 8 baro., D 500 x L 4450 mm. total., Material: Stainless steel AISI 304

Stock number: A201, Tube heat exchanger, stainless steel,, Spiraflo type Monotube 2/2,5-30., Ø 2 x L 3000 mm., Material: Stainless steel AISI 304

Stock number: A061, Tube heat exchanger, stainless steel,, containing:, 16 tubes, L 1900 mm each., 1 core heating/cooling., 1½ product tube., 2 double jacket, heating/cooling., 1 tube, L 1900 mm., 1½ product tube., 2 double jacket, heating/cooling., Total area 6,0 m2., Material: Stainless steel AISI 304

Stock number: A185, Tube heat exchanger, stainless steel,, OY Sanatasalo Sohlberg AB., Material: Stainless steel AISI 304

Stock number: A010, Tube heat exchanger, stainless steel,, Pasilac type RDF., Standing on legs i stainless cabinet., Ø 12 x 25000 mm product tube., Material: Stainless steel AISI 304

Country of origin: Germany, Weight: 200

For sale rotary dryer made from Bison, output 5 t/h, with heating stove 6mW with self feed and self cleaning moving fllor. With all need equipment, cyclon, chimney, and fans. Price 110.000,00 EUR EXW. +38765812388 Neven

Machine name: CHP used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA44.2S7/4 Generator kW: 132 kVA Turbo: No Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56kW Dimensions: L 3,600 x W 950 x H 1,750 mm Curb weight: 2,200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Machine name: Combined heat and power plant used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Curb weight: 2200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

A 2-stage plate heat exchanger W. Schmidt KG is available. Throughput capacity: 12000l/h, product temperature range: 5°C-93°C, max. operating pressure: 6bar, product: wort, machine dimensions X/Y/Z: approx. 1750mm/1750mm/600mm, weight: approx. 1000kg. Including 126 removed plates. On-site inspection is possible.

Universal temperature control unit WEINREICH type WTD 4Temperature control unit with electric heating and connections for external coolingFabr. No.: 11932217 year of construction 1993Temperature max. 140CBorcing pressure max. 6 barPump capacity 30 l/min. Tank volume 4 litresHeating capacity 4 kWeergisation capacity heat exchanger 15 kWCotor capacity of the pump 0.37 kWUmrune water supply + return G 3/8Cooling water flow + return G 3/8Total capacity 4.4 kWNe-connection 380 volts, 50 Hz, CEE plug-in temperature control medium water

Allestimento: Heating/cooling,Stato: used,Volume / Litri : 13.500,Tipologia: cubic,Piedi : feet,Heating/cooling (filter bar): present,Altezza Totale: 2.940,Larghezza Totale/mm: 1.820,Lunghezza Totale/mm: 3.400,targa identificativa: No,Accessori : Disc,Osservazioni: Manhole in the front floor available Container photos may show similar and not the exact container ,ultimo settore dutilizzo: Wine,Materiale a contatto con il prodotto: V2A 1.4301 (AISI304),Piletta di fondo : No, Frangiflutti: No, Piletta di fondo : No,Frangiflutti: No

Allestimento: Heating/cooling, Insulation, Overpressure,Products: Van Hool,Stato: used,Volume / Litri : 25.000,Pressione massima: 3,0,Tipologia: horizontal,Piedi : Rack,Heating/cooling (filter bar): present,Pressione massima ammissibile: 3.0,Coibentazione : present,Altezza Totale: 2.900,Larghezza Totale/mm: 2.550,Lunghezza Totale/mm: 6.060,anno di costruzione: 2014,Documentazione tecnica: Certificate of acceptance, Chiusino superiore : on the container,targa identificativa: Yes, Scarico : present,Osservazioni: material, in contact with the product: 1.4402 (Aisi 316L) Frame, Fe (lacquered)

Three heating units Kleindienst are available. 1) Kleindienst 3-294, year of manufacture: 1994, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar, connected load: 4.9kW. 2) Kleindienst 3-174, year of manufacture: 1992, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar. 3) Kleindienst 3-1194, year of manufacture: 1994, connected load: 0.1kW. An on-site inspection is possible.

Equipment: Heatable/coolable,Condition: factory new,Volume: 15,300,Max. max. Operating temperature : 130,Specific gravity of the medium: 1.2,Lower bottom: conical bottom,Design: standing,Stand shape: feet height adjustable,Number of feet: 4,Heating/cooling (filter bar): available,Max. permissible Operating overpressure: 3.0,Max. permissible Operating Temperature : 110,Temperature Control Cylinder: Thermoplate,Temperature Control Underbody: Thermoplate,Diameter inside: 2.359,Cylindrical Height: 3.205,Total Height: 4.380,Wall Thickness Underbody: 3,Wall Thickness Cylinder: 2.5,Wall Thickness Top Floor: 2,Technical Documentation: Drawing,Manhole / Dome: