surface grinding machine used for sale

including filter installation; Machine size approx. 4200x1900x2800mm.; dimensions filter unit approx. 4000x700mm, control box

including refrigerant system and cabinet with accessories

Machine dimensions: 3500x2300x2100 mm Max. grinding length: 1000mm Max. grinding width: 400mm Standing weight: 4000 kg. The machine can be tested after prior agreement. Hydraulic repair required.

BPH 20 NA machine for sale, year 1966. GO performed in 2004 by Procházka-Moravec. Also installed Heidenhain measuring. Table clamping surface 200 x 630 mm. max. revolutions 2440/min.

Controls: SIEMENS SINUMERIK, length: 3000mm, width: 1700mm, height: 2000mm.

Rated current: 20A, fused current: 25A.

Operational voltage: 380V, nominal current: 20A.

Max. grinding length/ width: 600/ 375mm, max. working height: 465mm, max. load: 300kg, groove width: 16mm, length: 3300mm, width: 2700mm, height: 2380mm, weight: 3.5t, including accessories and documentation, was maintained regularly.

Motor power: 85W, weight: 1.6t.

Grinding area: 630x250x300mm, clamping surface dimensions: 700x250mm.

X-travel: 1300mm, y-travel: 550mm, z-travel: 560mm, table width: 600mm, max. load: 1t, table height: 950mm, controls: Siemens SINUMERIK, length: 4800mm, width: 1970mm, height: 2450mm, weight: 5.4t, with documentation.

X-travel: 600mm, y-travel: 475mm, z-travel: 400mm, max. table load: 600kg, connected load: 14kW, controls: UNICON-F, length: 2750mm, width: 2710mm, height: 2720mm, weight: 3.3t, with documentation, machine bed made of micro-granite, drive of the y- and z-axis via ball screw and controllable AC motors.

Sanding range X/Y/Z: 450mm/200mm/375mm, distance table-spindle center: 525mm, hydraulic table drive: 2-28m/min. Cross feed: 3mm - 2/3 wheel width, max. cross travel: 185mm, cross travel: 1200 mm/min. Vertical adjustment speed: 185mm/min. Speed: 1400/2800 rpm, grinding wheel: 300mm/25mm/76.2, table load: 200kg. Box dimensions 2050mm/2050mm/2300mm, machine weight: 1,820 kg. Documentation available. On-site inspection is possible.

Table dimensions: 2000x500mm, magnet clamping plate dimensions: 2x 1000x400mm, weight: 7t, with documentation, rectifier system hand crank dresser, wet grinding device, paper belt filter, grinding wheel and grinding wheel holder, the machine needs to be overhauled.

Weight: 1.05t, with documentation, an inspection is possible.

Grinding disk diameter: 600mm, controls: Siemens S7, with documentation, was maintained regularly, an inspection is possible.

Without accessories or spare parts, an inspection is possible.

Has been modified to reduce metal dust and fitted with a completely removable extraction system, operating instructions available, oil leaks, apart from that, functional.

Weight: 7.6t, with documentation and accessories, an inspection is possible.

Max. grinding length: 620 mm, Sanding width: 200 mm, Max. Workpiece height: 350 mm. Spindle speed: 1,380 rpm. Magnetic clamping plate dimensions 200 mm x 600 mm, weight: 3000 kg. On-site viewing is possible.

Grinding range X/Y/Z: 600mm/375mm/375mm, grinding wheel: 300mm/50mm/76.2mm, max. table load: 300kg, table clamping surface X/Y: 900mm/350mm, weight: 3300kg. Including hydraulic system, self-made extraction system. X/Y/Z axes limited in function. Documentation available. On-site inspection is possible.

Sanding path X/Y: 1000mm/500mm, weight: 5000kg. Including coolant pump with tank (approx. 252l), hydraulic system and self-made suction device. Dressing axis (W-broken). Documentation available. On-site inspection is possible.

Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

Table dimensions: 1000x450 mm Longitudinal travel X: 800 mm Cross travel Y: 500 mm Transverse path Z: 450 mm Automatic lowering: Yes Grinding wheel dimensions: 350x100 mm Approximate weight: 5000 Kgs Equipped with: Magnetic chuck: 800x350 mm Magnetic chuck: 500x200 mm Diamond grinder wheel: Yes

Useful length mm 1100 Max grindable length mm 1100 Max longitudinal stroke mm 1300 Useful width of table mm 400 Max grindable width mm 550 Traversing speed of the table m./1 3:30 Grinding wheel dimensions (diam.xfasciaxhole) mm 400x50x127 Motor power Hp 12 Weight Kg 7300 COMPLETE WITH: Electromagnetic table mm 620x300

weight of the machine ca.: 3 t digital: ja : 600-220mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1000-500mm grinding stone: 8 Stk. digital: ja weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 350 mm magnetic clamping plate: 300 x 150 mm grinding width: mm weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1200x600 mm Fixing slots: 3 Longitudinal traverse (X-axis): 1350 mm Cross traverse (Y-axis): 560 mm Vertical traverse (Z-axis): 575 mm Grinding wheel dimensions: Ø 400x127x50/100 Grinding wheel power: 15 HP-1500 rpm Hydraulic pump power: 7,5 HP-1500 rpm Coolant supply power: 1/6 HP Approx machine weight: 5300 Kgs Equipped with: SELTER electromagnet: 1200x600 mm

Table dimensions: 700x300 mm Grinding length: 710 mm Grinding width: 305 mm Max distance from the table to the spindle centerline: 500 mm Approx machine weight: 2300 Kgs Floor ocupation: 3000x1490x1930 mm Equipped with: Control: Chevalier Electromagnet: 500x260 mm New replacement spindle

: gebraucht : 2019 : 5538 : prompt, Zwischenverkauf v : Taiwan : 47800 € : 1 : 630 mm : 1000 x 400 mm : 1000 mm : 1000 x 400 mm : 1050 mm : 11000 mm : 5 - 25 m/min : 0 - 2250 mm/min : 0,001 mm : 405 mm : 0,001 - 0,04 mm : 675 mm/min : 0.001 mm : 1450 1/min : 3,7 kW : 1.5 kW : 1 kW : 5,6 kW : 4280 mm : 1730 mm : 2080 mm : 3500 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 8", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list Aut. vertical feed Servo drive for grinding wheel feed and table cross feed Hardened slide ways in all 3 axes with roller bearings Grinding wheel spindle on 4 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device with automatic compensation Grinding wheel Grinding ...

OKAMOTO PSG-63UAN Surface Grinder YOM 1986 DRO Number of automatic axes 3 Maximum grinding lenght x width 600 x 300 mm Stroke X axis 750 mm Stroke Y axis 340 mm Stroke Z axis 322 mm Table 605x300 mm Max. load on table 420 kg Grinding wheel speed 1500 rpm Grinding spindle motor power 3.7 kW Grinding wheel 355x38 mm Wheel dresser on head Yes Electro-permanent magnetic plate with small pole pitch- Yes Dimensions of magnetic plate 600 x 300 mm Lubrication tank with pump Yes Paper filtration unit Yes Total power required 7.5 kVA Dimensions 2630 x 1880 x 1850 mm Weight 2200 kg

: neu : ca. 6 Monate ab Auftragse : Taiwan : 120620 € : 2400.34 € : 600 mm : 1.000 x 400 mm : 1015 mm : 1.000 x 400 mm : 100 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 450 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 1.1 kW : 1.1 kW : 4450 mm : 2655 mm : 2080 mm : 4200 kg : 250 kg : 470 kg : 355 x 50 x 127 mm : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Turcit ...

Hydraulic grinding machine for flat surfaces, abrasion using pads. Total Ø 300mm, 8 pads of 70 x 20mm Adjustable table speed. Displacement 1200mm Magnetic plate with dimensions 750 x 250mm Maximum height with respect to magnetic plate 250mm Start of the grinding wheel motor using star delta, the machine is operational when the speed 2 light turns on.

Type: 3G 71M Parameters: 230 mm, 600 mm Manufacturer: Stankoimport Year of production / SO / GO: - / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Grinding width: 230 mm Grinding length: 600 mm Grinding height: 400 mm Weight: 3000kg

The machine is in good technical condition, after prior agreement the possibility of testing. Longitudinal table movement - axis x 1000 mm Transverse table movement - z axis 320 mm Vertical table movement - y axis 350 mm Grinding spindle speed 2280, 2600 rpm Max. workpiece weight 280 kg machine weight 3200 kg

The machine is in good technical condition, after agreement the possibility of testing. • Solid cast iron construction • Continuous / step automatic reversing feed • Variable table speed up to 25 m / min • Coarse and fine feed • Table parking after cycle completion. • Automatic direct dressing with grinding wheel compensation • 1/10 micron feed down and to the side with the possibility of a combination of both • Hydraulic oil cooler • All settings are controlled from the front of the machine. Magnetic table dimensions: 600x300 mm Transverse feed: 340 mm Maximum grinding height for new wheel: 322 mm Table load: 420 kg Grinding wheel dimensions: 355x38x127 mm Length x width x machine height: 2730 x 1910 x 1780 mm Weight without accessories: 2500 kg .

Clamping surface of the magnet 600x350 mm Max grinding width 400 mm Max grinding length 700 mm Max distance of spindle axis from clamping surface Dimensions br. discs (ø x width x clamping hole) 300 x 20-50 x 76 Machine movement speed 2 -28 m/min Automatic transverse feed adjustable 1 – 60mm/Hub Automatic vertical movement 0.002 – 0.06 mm Machine weight approx. 2800kg Machine vagaries approx. 2800 x 1900 x 2400 mm Sander fully functional, can be tested.

The machine is in good technical condition, after agreement the possibility of testing. Grinding range, max. 600 mm. Table Ø / magnetic chuck Ø 600 mm. Workpiece - Swing Ø approx. 800 mm. Table speed, continuously adjustable 20 - 80 rpm. Max. grinding height above the table approx. 300 mm. Vertical movement of the grinding head 220 mm. Transverse movement of the grinding support 320 mm. Max. workpiece weight on the table 400 kg. Vertical feed, automatic 0.01 - 0.2 mm / stroke. Grinding spindle speed, continuously adjustable 1,000 - 2,400 rpm. Grinding wheel Ø, max. 400 x 120 x 76 mm Grinding spindle drive approx. 28 kW. Total electrical load 35 kW - 380 V - 50 Hz. Weight, approx. 4,500 kg.

The machine is in good technical condition, after prior agreement the possibility of testing. Max. grinding length 1,000 mm Max. height of ground object with new discs (from the table) 350 mm Longitudinal table movement 1,060 mm Transverse table movement 350 mm Vertical movement of the grinding headstock 400 mm Distance of the spindle axis from the table clamping surface min. 75 mm, max. 475 mm Vertical cutting feed - 1 scale division 0.001 mm Grinding wheel (ø x width x hole ø) 250 x 25 x 76 mm Grinding wheel speed ø 250 mm 2,522 min-1 Partially worn grinding wheel speed 3 319 min-1 Grinding headstock motor power 3 kW Machine dimensions Machine floor area approx. 4,100 x 2,000 mm Machine height 2,125 mm Machine weight 3,400 kg Electrical equipment Total machine power 9.3 kVA Accessories Magnetic clamping plate 300 x 1,000 mm , height 100 mm

: neu : 2024 : 5549 : September 2024, Zwischenv : Taiwan : 55440 € : 1114.34 € : 1 : 610 mm : 600 x 300 mm : 610 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 0 - 2,250 mm/min : 3 - 32 mm : 320 mm : 0.001 : 5,5 kW kW : 0.74 kW : 1 kW : 1 kW : 2950 mm : 1490 mm : 2080 mm : 2200 kg : 355 x 50 x 127 mm : 1.450 U/min : 0,001 - 0,04 mm : 675 mm/min : 0,001 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator automatic dresser over the wheel, with compensation grinding wheel grinding wheel flange grinding wheel balancing stand (roller type) balance arbor LED machine l ...

Description: Magnetic chucks dimensions: approx. 900 x 280 mm Max. Grinding wheel diameter: approx. 250 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 2,580 x 1,500 x 2,000 mm

: neu : 2024 : 5550 : September 2024, Zwischenv : Taiwan : 75100 € : 1509.51 € : 600 mm : 1000 x 400 mm : 1015 mm : 1000 x 400 mm : 670 kg : 1100 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 mm : 450 mm : 0.001 - 32 : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2.000 1/min : 5,5 kW : 1.5 kW : 1.1 kW : 1.1 kW : 3630 mm : 2682 mm : 2200 mm : 4800 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working are ...

: gebraucht : 2006 : 5539 : Mai 2024, Zwischenverkauf : Taiwan : 49600 € : 1 : 850 mm : 1000 x 610 mm : 1000 mm : 1000 x 600 mm : 1000 mm : 5 - 25 m/min : 1250 mm/min : 3 - 32 mm : 0.02 : 400 mm/min : 0.001 mm : 1450 1/min : 11 kW : 3.7 kW : 0.37 kW : 20,6 kW : 3700 mm : 4000 mm : 3250 mm : 7400 kg : 1500 kg : 1120 kg : 1500 kg : 355 x 75 x 127 mm : 3 - 32 mm/min Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel Grinding wheel flange machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH NEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WHEEL The data for this ad was created with ModulMWS -  ...

Description: Serial number: B10460 Magnet dimensions: 600 x 300 mm Grinding wheel diameter: 270 mm weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 2,200 mm

Description: Fabrication number: 803088 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 80 A Table diameter: 1000 mm Grinding wheel diameter: 500 mm weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,400 x 3,200 mm

: neu : ca. 6 Monate ab Auftragse : Taiwan : 72710 € : 1461.47 € : 445 mm : 460 x 200 mm : 460 mm : 450 x 200 mm : 0,1 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 220 mm : 340 mm : 0 - 3000 mm/min : 0.001 mm : 1000 - 7000 1/min : 3 kW : 0.7 kW : 1.1 kW : 1.1 kW : 2510 mm : 2515 mm : 2010 mm : 1550 kg : 1015 mm : 175 kg : 210 kg : Dm. 205 x 12,7 x 31,75 mm : 0,004 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with T ...

Description: Serial number 62333 50 Hertz , 400 volts , 1.5 kW , SAV magnetic plate,  ,dimensions 350 x 150 mm , Software version 1.1.2 nd 780 , V max. 40m / S D max. 205 mm , W max. 25 mm , ID 31.75 mm , Travel distance Z-axis 210 mm weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,300 x 1,500 mm

Description: Motor SIEMENS 220/380 V, 0.55 kW, 2770 rpm Magnetic plate 00110-15 B 3, approx. 250 x 150 mm max. grinding wheel diameter 180 mm weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 1,600 mm

Technische Daten Technical Data Table Surface 460x200 mm Longitudinal / Square 510x225 mm Speed Spindle / Spindle Speed 2850 rpm Grinding wheel 200x25x32 mm Digital Anzeige / Digital Readout Acu Rite If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer