surface grinder used for sale

Magnet dimensions: 300x600mm. Hydraulics leaking. Auction-ID: A1-51529-9

HMTW M7150HX6 – Surface Grinding Machine Manufacturer: Hangzhou Machine Toolworks Brand: HMTW Model: M7150HX6 Machine Type: Horizontal Spindle Surface Grinding Machine Condition: Used Model M7150HX6 Grinding Type Surface Grinding Grinding Spindle Horizontal Table Working Length 630 mm Table Working Width 500 mm Grinding Wheel Horizontal Spindle Grinding Wheel Grinding Spindle Motor 7.5 kW Motor Speed 1,410 rpm Main Voltage 380 V Frequency 50 Hz Phases 3-Phase Total Power Consumption 11.2 kVA Main Fuse 40 A Protection Rating IP54 Auction-ID: A1-51153-96

Conventional surface grinding machine with magnetic chuck/table, coolant system and protective side guards. Used industrial machine; brand/model not clearly visible in the photos. Auction-ID: A1-51153-14

Magnet dimensions: 300x800mm. Lubrication leaking. Auction-ID: A1-51529-26

Stand-alone and automated device for routine and repetitive surface analysis, ideal for measuring thin films THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards ...

Dimensions magnet: 250x600mm. Defective. Auction-ID: A1-51529-33

Working width: 520 mm Length of the planing table: 3000 mm Number of knives: 4 St. Motor output: 4 kW Dimensions (L/W/H): 3000 x 1000 x 1200 mm weight of the machine ca.: 850 kg cutting capacity: 20 mm SCM F520 surface planer (jointer) Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Working width: 520 mm Cutterblock with straight knives Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of planer knives: 4 Max. depth of cut: 20 mm Table height: 860 mm Motor power: 4 kW (5.5 hp) Available from stock, loaded onto transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding area 500 x 200 mm, automatic vertical infeed and SINUS magnet

Ref. -No.: 10545 Manufacturer: OKAMOTO Year of construction: 1984 Type of control: CNC-Steuerung Control: CNC Storage location: Halberstadt Country of origin: Japan Cross movement of the grinding wheel head: 340 mm Workpiece spindle speed range: 1500 RPM Max. Grinding length: 600 mm Peripheral speed: 1800 m / s Grinding Width: 320 mm Max. Table longitudinal movement: 750 mm Grinding Wheel Hole Diameter: 127 mm Dimensions Of The Machine Ca.: 2,63 x 1,88 x 1,85 m Grinding Wheel Width: 40 mm Grinding wheel dimensions: 355 x 38 mm Machine weight: 2200 kg Grinding wheel diameter (max.): 350 mm Max. distance table-spindle center: 500 mm Table Length: 605 mm Table Width: 300 mm T-Slots: 3 x 17 mm Further information: The machine can be viewed under power by arrangement.

Working width: 410 mm Working height: 230 mm Motor output: 5,5 kW Length of the planing table: 1.700 mm Number of knives: 3 St. Feed speed: 7 m/min. machine weight ab.: ca. 300 kg : Streifenhobelmesser The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 530 mm Working height: 3 -250 mm Motor output: 5,5 kW Number of knives: 4 St. Feed speed: 6 / 12 m/min. Dust suction hood: 140 mm machine weight ab.: 1.000 kg : Tersa cutting capacity: 8 mm : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Anios Aerosept VF 500 – Airborne surface disinfection device Manufacturer: Anios Model: Aerosept VF 500 Autonomous and fully automatic atomizer for the disinfection of previously cleaned surfaces. Processes with boosted performance Heating of the solution at a constant temperature of 55°C throughout the spraying period. Sequential self-regulation of the atomization for optimization of mist quality and efficiency Concentration perfectly stabilized at 7ml/m³ thanks to an original venturi system assisted by a peristaltic pump. Simple process Fully automated process (volume and speaker selection via barcode reader) Delayed start preset to 1 min (can be set from 1 min to 9 hours) Easy can replacement (Stabilized solution of peracetic acid +/- 1200 ppm and hydrogen peroxide) without risk of product splashing. Auction-ID: A1-51618-431

CONRAD BOXER 200 (2019), , The machine has been serviced by the manufacturer; invoices are available., Undercarriage (tracks) is swiveling , , Effective stroke: 5.2 meters, Maximum pulling force: 6,000 daN, Maximum pushing force: 2,000 daN, Hydraulically driven 4-inch drill head, type Conrad T-4-5-600, powered by two hydraulic motors, equipped with a (series/parallel) high/low circuit., - Bore diameter: 100 mm., - High-speed drive torque: 600 daNm at 10–60 rpm., - Breakaway torque: 650 daNm (CCW – direction of rotation), - Low-speed drive torque: 300 daNm at 10–120 rpm., - Hydraulically driven winch for maneuvering the collector weight. Max. pulling force 500 daN, 200 meters of Ø8 mm cable., - Hydraulically driven Caprari (NEW) Mec A/4-80 flushing pump for flushing drilling,, Flow rate is max. approx. 140 m³/hr. at 8.5 bar,, -42 drill pipes, type COD95 / 88.9 x 6.3 x 4000 NL (168 ...

Conventional surface grinding machine with magnetic chuck/table, coolant system and protective side guards. Used industrial machine; brand/model not clearly visible in the photos. Auction-ID: A1-51509-14

HMTW M7150HX6 – Surface Grinding Machine Manufacturer: Hangzhou Machine Toolworks Brand: HMTW Model: M7150HX6 Machine Type: Horizontal Spindle Surface Grinding Machine Condition: Used Model M7150HX6 Grinding Type Surface Grinding Grinding Spindle Horizontal Table Working Length 630 mm Table Working Width 500 mm Grinding Wheel Horizontal Spindle Grinding Wheel Grinding Spindle Motor 7.5 kW Motor Speed 1,410 rpm Main Voltage 380 V Frequency 50 Hz Phases 3-Phase Total Power Consumption 11.2 kVA Main Fuse 40 A Protection Rating IP54 Auction-ID: A1-51509-96

Max. sanding length 610 mm, max. sanding width 305-400 mm Auction-ID: A1-51634-12

Offered 250mm. Feed steps: 12. Cross-bed feed: 0.05-3mm/rev. Carriage and rotating section feed: 0.04-2.5mm/rev. Feed motor speed: 1000rpm. Feed motor power: 2.2kW. Permissible workpiece weight, cantilevered with a center of gravity distance of 300mm: approx. 5000kg. Permissible workpiece weight between centers, without additional support: 20000kg. Equipped with a large faceplate with clamping devices, cross-bed support, movable tool slide and mechanical lever controls. Inspection possible by arrangement.

The Surfcom 130A is a compact surface texture measuring instrument for workshops. It offers optimal performance in production Auction-ID: A1-51953-129

JONES & SHIPMAN 540L – Surface Grinding Machine JONES & SHIPMAN 540L surface grinding machine, designed for precision grinding operations of flat surfaces in industrial and professional environments. Based on the 540 series from the British manufacturer Jones & Shipman, this machine is particularly suitable for tooling and precision engineering work as well as for the manufacture and finishing of technical parts and moulds. Features: Brand: JONES & SHIPMAN Model: 540L Type: Surface Grinding Machine Application: Grinding of flat surfaces Use: tooling, precision mechanics, manufacture and finishing of technical parts Environment: industrial and professional Auction-ID: A1-51946-37

Manufacturer: Otto Martin Maschinenbau, Ottobeuren Model / Type: T 51 Machine number: V 105846 Year of Make: 1979 Machine Type: Surface Planer / Dressing Machine Working width: approx. 510 mm Voltage: 380 V Frequency: 50 Hz Current type: 3~ three-phase current Rated current: 9.8 A Solid dressing tables in cast iron design Adjustable dressing fence Hollow/pointed joint adjustment available Display for hollow/pointed joint available Foot operation / pedal available Extraction connection available Belt and chain drive Protection/auxiliary stop available Auction-ID: A1-51205-8017

grinding length:600 mm grinding width:300 mm total power requirement:7,5 kW number of spindle speeds:0-3000 grinding wheel motor:7,5 kW grinding wheel diameter:300 mm dimensions of grinding wheel:76 x 20 mm ABA magnetic table flat grinding machine

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

grinding length:600 mm grinding width:250 mm workpiece height:380 mm :Sinumerik max. dia. of grinding wheel:300 mm weight:4000 kg total power requirement:12,5 kW grinding wheels:Ø 400 mm max. width of grinding wheel:100 mm grinding wheel hole diameter:127 mm turning speeds:470 - 12030 1/min x-axis:600 mm y-axis:300 mm z-axis:250 mm grinding range:450 x 200 mm distance spindle nose and table:500 mm table load:250 kg dimensions of the machine ca.:2600 x 2100 x 2400 mm switchgear cabinet:1300 x 800 x 2000 mm hydraulical unit::450 x 350 x 500 mm Documents:vorhanden

grinding length:1250 mm grinding width:400 mm workpiece height:550 mm workpiece weight:750 kg table-size:1720 x 400 mm magnetic clamping plate:1250 x 400 mm dist. center of grinding spindle - table:750 mm turning speed range - grinding wheel:3000 U/min Length movement of the table:1300 mm grinding wheel size:Ø 400 x 50 x 127 mm switchgear cabinet:inkl. hydraulic power unit:inkl. coolant:inkl. voltage:380 V table load:max. 1100 total power requirement:13,8 kW weight of the machine ca.:6000 kg dimensions of the machine ca.:5000 x 3400 x 2400 mm Documents:inkl.

grinding length:1000 mm grinding width:250 mm workpiece height:400 mm total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3.300 x 1.800 x 2.300 mm hydraulic power unit:400 x1000 x 1500 mm control cabinet:2 Stück, 1000 x 1400 x 1500 mm

grinding length:600 mm grinding width:300 mm workpiece height:450 mm total power requirement:8 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,8 x 3,0 x 2,0 m grinding spindle speed:1440 / 2905 U/min with magnetic plate 600 x 200 mm autom. vertical feed coolant attachment Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.