surface grinder used for sale

General SKUR0078 LocationBarneveld MakeTMCI Chemtech TypeCR 0327 No.WO 0327/01 Year of constructionunknown Main Features MaterialStainless steel Motor5.5 KW Surface0.1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Heating surface0,1 M2 Cylinder sizesdia 110 x 320mm Inletdia. 20mm Outletdia. 20mm Motor5,5 kW 380-415 Volt Information Total height1,4 M Weight260 Kg Floorspace1,0x0,6 MScraped surface heat exchangers-Heat exchangers > Scraped surface heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0087 LocationBarneveld MakeSchröder & Co Maschinenfabrik (D) TypeVWK 01/60-400 No.110705 Year of construction1989 Main Features MaterialStainless steel Motor2.2 KW Surface0.07 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Number of stages:1 Heating surface0.07 M2 Cylinder sizesdia.60x380mm With jacketcheck Inletdia. 25mm Outletdia. 25mm Motor2,2 kW 230 Volt With variable speed drivefrequency controller Information Mounted on wheelscheck With switchgearcheck Total height1,4 M Weight230 Kg Floorspace1,4x0,4 MScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

General SKU311P700 LocationBarneveld MakeSchröder&Co Maschinenfabrik (DE) No.23-232 Year of construction1984 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchangerCooler Number of stages:1 Cylinder sizes+/- dia.80mm x350mm Max. temperature-20 degr.C. Inletdia.25mm (product), dia.25mm (Glycol) Outletmissing Motor2,2 KW, 220/380 Volt With variable speed drivecheck With variable speed drivecheck Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,7 M Total height1,3 M Weight150 KG Technical specs Extra informationcylinder size: dia. 80 mm x 350 mmScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- ...

General SKU273P407 LocationBarneveld MakeDeutsche Vacuumapparate GmbH (DE) TypeM03B No.94006 Year of construction1994 Pressure Working pressure1 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Motor5 KW Surface3 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heat exchangercheck Heating surface shell+/- 3,0 m2 Capacity500 Ltr Cylinder sizesdia.600mm x2300mm Max. temperature100 degr.C. With jacket(60 Ltr) Max. temperature-10 degr.C. Inletdia.55mm, dia.25mm Outletdia.55mm Motor5,0 KW, 400/690 Volt (Ex.) Speed71 rpm Information Floorspace1,2x1,1 M Total height3,0 M Weight840 KG Technical specs Extra informationcylinder size: dia. 600 mm x 2300 mmScraped surface heat exchangersDVA DeutscheHeat exchangers > Scraped surface heat exchangersBrand > DVA Deutsche What you can expec ...

General SKU020A140 LocationBarneveld MakeAlfa Laval TypeContherm 6x4 No.HC-288 Year of constructionunknown Main Features MaterialStainless steel Motor4 KW Surface0.4 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,37 M2 (4 Square Feet) Cylinder sizesdia. 152mm (6 Inch) With jacketcheck Motor4,0 KW, 380 Volt With variable speed drivecheck Information Mounted on framecheck Floorspace1,2x0,9 M Total height1,8 M Technical specs Extra informationcylinder size: 152 mmScraped surface heat exchangersAlfa LavalHeat exchangers > Scraped surface heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...

General SKU034G143 LocationBarneveld MakeAlfa Laval TypeContherm 6x3 No.HC-4844 NCC + HC-1802 NCC Year of construction1992 / 1982 Material Product contact materialStainless steel Pressure Working pressure20 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor7.5 KW Surface0.279 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,279 m2 each With jacketcheck Motor2x 7,5 KW, 415 Volt Speed177 Rpm Information Mounted on framecheck With switchcheck Floorspace1,3x1,0 M Total height2,0 M Technical specs Extra informationworking pressure 20 bar (300 PSI) / 31 bar (450 PSI): jacket working pressure 15,5 to 17,2 barScraped surface heat exchangersAlfa LavalHeat exchangers > Scraped surface heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machin ...

BERNARDO BSG 4080 TDC surface grinding machine was built in Austria in 2018. Designed for fully professional production applications, the machine machines workpieces placed on a magnetic plate or directly on the work table with the utmost precision and accuracy. The hydraulically driven work table with a large magnetic platen moves on hardened and ground guideways, which have been additionally coated with a special Turcite-B coating to increase abrasion resistance. The hydraulic drive, in the form of a separate hydraulic unit with heat exchanger, prevents vibration and overheating, and also ensures safe table feed even under heavy loads. Radial and axial forces are evenly distributed on special bearings without play in the grinding wheel spindle. The BERNARDO magnetic grinding machine weighs 3400 kg. Technical specifications of the magnetic surface grinding machine BERNARDO BSG 4080 T ...

Surface grinding machine STEFOR 8/5 RTB Year of manufacture 1985 Grinding wheel 400 x 127 2 grinding wheel holders Sanding paths 800x x 500 x 480 Weight 3700 kg Length 2.60 m Width 1.60 m Height 1.80 m

Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

Table dimensions: 1000x450 mm Longitudinal travel X: 800 mm Cross travel Y: 500 mm Transverse path Z: 450 mm Automatic lowering: Yes Grinding wheel dimensions: 350x100 mm Approximate weight: 5000 Kgs Equipped with: Magnetic chuck: 800x350 mm Magnetic chuck: 500x200 mm Diamond grinder wheel: Yes

Useful length mm 1100 Max grindable length mm 1100 Max longitudinal stroke mm 1300 Useful width of table mm 400 Max grindable width mm 550 Traversing speed of the table m./1 3:30 Grinding wheel dimensions (diam.xfasciaxhole) mm 400x50x127 Motor power Hp 12 Weight Kg 7300 COMPLETE WITH: Electromagnetic table mm 620x300

weight of the machine ca.: 3 t digital: ja : 600-220mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1000-500mm grinding stone: 8 Stk. digital: ja weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weibert fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

Weibert ADH 26C Dressing thickness planer Dressing table (LxW): 1120 x 275 mm Thickness table (LxW): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max. chip removal 3 mm Max. planing width 258mm Planer shaft diameter: 70 mm Planer Knife 3 Speed 5200 1/min Feed rate 5.5 m/min Motor: 1.7 kW 400 and in 230V Suction nozzle diameter: 100 mm Weight 170 kg G&STÜ-5904026 relkm23 Optional 400V G&STÜ-5904027

Weibert ADH 31C Dressing thickness planer Dressing table (LxW): 1295 x 325 mm Thickness table (LxW): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max. chip removal 3 mm Planer shaft diameter: 70 mm Max Planer Width 308mm Planer Knife 3 Speed 5200 1/min Feed rate 7 m/min Motor: 2.2 kW 230V Suction nozzle diameter: 100 mm Weight 210 kg G&STÜ-5904031 relkm Optionally with 400V G&STÜ-5904032

grinding length: 350 mm magnetic clamping plate: 300 x 150 mm grinding width: mm weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ELB Perfect BD 10 SPS, built in 2003, grinding area 1000 x 400 x 400 mm, the machine was overhauled in 2012 and equipped with the new ELB Easy Grind control, accessories: Electric Perm magnetic clamping plate 1000 x 600 mm, Automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter, suction. The machine is functionally tested and can be viewed under power at our site, we are also happy to take over the installation and training on site.

Table dimensions: 1200x600 mm Fixing slots: 3 Longitudinal traverse (X-axis): 1350 mm Cross traverse (Y-axis): 560 mm Vertical traverse (Z-axis): 575 mm Grinding wheel dimensions: Ø 400x127x50/100 Grinding wheel power: 15 HP-1500 rpm Hydraulic pump power: 7,5 HP-1500 rpm Coolant supply power: 1/6 HP Approx machine weight: 5300 Kgs Equipped with: SELTER electromagnet: 1200x600 mm

Table dimensions: 700x300 mm Grinding length: 710 mm Grinding width: 305 mm Max distance from the table to the spindle centerline: 500 mm Approx machine weight: 2300 Kgs Floor ocupation: 3000x1490x1930 mm Equipped with: Control: Chevalier Electromagnet: 500x260 mm New replacement spindle

: gebraucht : 2019 : 5538 : prompt, Zwischenverkauf v : Taiwan : 47800 € : 1 : 630 mm : 1000 x 400 mm : 1000 mm : 1000 x 400 mm : 1050 mm : 11000 mm : 5 - 25 m/min : 0 - 2250 mm/min : 0,001 mm : 405 mm : 0,001 - 0,04 mm : 675 mm/min : 0.001 mm : 1450 1/min : 3,7 kW : 1.5 kW : 1 kW : 5,6 kW : 4280 mm : 1730 mm : 2080 mm : 3500 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 8", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list Aut. vertical feed Servo drive for grinding wheel feed and table cross feed Hardened slide ways in all 3 axes with roller bearings Grinding wheel spindle on 4 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device with automatic compensation Grinding wheel Grinding ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 120620 € : 2400.34 € : 600 mm : 1.000 x 400 mm : 1015 mm : 1.000 x 400 mm : 100 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 450 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 1.1 kW : 1.1 kW : 4450 mm : 2655 mm : 2080 mm : 4200 kg : 250 kg : 470 kg : 355 x 50 x 127 mm : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Turcit ...

Hydraulic grinding machine for flat surfaces, abrasion using pads. Total Ø 300mm, 8 pads of 70 x 20mm Adjustable table speed. Displacement 1200mm Magnetic plate with dimensions 750 x 250mm Maximum height with respect to magnetic plate 250mm Start of the grinding wheel motor using star delta, the machine is operational when the speed 2 light turns on.

Type: 3G 71M Parameters: 230 mm, 600 mm Manufacturer: Stankoimport Year of production / SO / GO: - / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Grinding width: 230 mm Grinding length: 600 mm Grinding height: 400 mm Weight: 3000kg

The machine is in good technical condition, after prior agreement the possibility of testing. Longitudinal table movement - axis x 1000 mm Transverse table movement - z axis 320 mm Vertical table movement - y axis 350 mm Grinding spindle speed 2280, 2600 rpm Max. workpiece weight 280 kg machine weight 3200 kg

Type: BPV 40/1500 Parameters: Manufacturer: Kovosvit Holoubkov Description: Machine in very good technical condition, after overhaul. Max. grinding length 1500 mm. Max. grinding width 400 mm Max. workpiece height 500 mm. Max. grinding wheel diameter 520 mm Machine weight 12000 kg. Magnet with a very fine pole spacing (5 mm) for high holding force and the possibility of grinding even small parts. Regulation of magnet holding force. Filtermist FX 7000 double-sided extraction. Built-in lower grinding wheel dresser.

The machine is in good technical condition, after agreement the possibility of testing. • Solid cast iron construction • Continuous / step automatic reversing feed • Variable table speed up to 25 m / min • Coarse and fine feed • Table parking after cycle completion. • Automatic direct dressing with grinding wheel compensation • 1/10 micron feed down and to the side with the possibility of a combination of both • Hydraulic oil cooler • All settings are controlled from the front of the machine. Magnetic table dimensions: 600x300 mm Transverse feed: 340 mm Maximum grinding height for new wheel: 322 mm Table load: 420 kg Grinding wheel dimensions: 355x38x127 mm Length x width x machine height: 2730 x 1910 x 1780 mm Weight without accessories: 2500 kg .

Clamping surface of the magnet 600x350 mm Max grinding width 400 mm Max grinding length 700 mm Max distance of spindle axis from clamping surface Dimensions br. discs (ø x width x clamping hole) 300 x 20-50 x 76 Machine movement speed 2 -28 m/min Automatic transverse feed adjustable 1 – 60mm/Hub Automatic vertical movement 0.002 – 0.06 mm Machine weight approx. 2800kg Machine vagaries approx. 2800 x 1900 x 2400 mm Sander fully functional, can be tested.

The machine is in good technical condition, after agreement the possibility to test. Table clamping area: 200x630 mm Maximum grinding length: 630 mm Grinding wheel - diameter: 250 mm Grinding spindle speed: 2660 rpm. Maximum workpiece weight with chuck: 130 kg Total power input: 5.5 kW Weight: approx. 2200 kg Machine dimensions: (LxWxH): 2710x1495x1670 mm.

The machine is in good technical condition, after agreement the possibility of testing. Grinding range, max. 600 mm. Table Ø / magnetic chuck Ø 600 mm. Workpiece - Swing Ø approx. 800 mm. Table speed, continuously adjustable 20 - 80 rpm. Max. grinding height above the table approx. 300 mm. Vertical movement of the grinding head 220 mm. Transverse movement of the grinding support 320 mm. Max. workpiece weight on the table 400 kg. Vertical feed, automatic 0.01 - 0.2 mm / stroke. Grinding spindle speed, continuously adjustable 1,000 - 2,400 rpm. Grinding wheel Ø, max. 400 x 120 x 76 mm Grinding spindle drive approx. 28 kW. Total electrical load 35 kW - 380 V - 50 Hz. Weight, approx. 4,500 kg.

The machine is in good technical condition, after prior agreement the possibility of testing. Max. grinding length 1,000 mm Max. height of ground object with new discs (from the table) 350 mm Longitudinal table movement 1,060 mm Transverse table movement 350 mm Vertical movement of the grinding headstock 400 mm Distance of the spindle axis from the table clamping surface min. 75 mm, max. 475 mm Vertical cutting feed - 1 scale division 0.001 mm Grinding wheel (ø x width x hole ø) 250 x 25 x 76 mm Grinding wheel speed ø 250 mm 2,522 min-1 Partially worn grinding wheel speed 3 319 min-1 Grinding headstock motor power 3 kW Machine dimensions Machine floor area approx. 4,100 x 2,000 mm Machine height 2,125 mm Machine weight 3,400 kg Electrical equipment Total machine power 9.3 kVA Accessories Magnetic clamping plate 300 x 1,000 mm , height 100 mm

Key data: 400 mm, 2600 mm

SPECIFICATIONS: Work table size mm: 2600 x 400 Installed capacity: KW 5.0 Complete with hole punch, knives and regulator

Key data: 500 mm, 2800 mm, 4 St.

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...

SECOND-HAND SURFACE PLANER EXCEL LUCK INDUSTRY MOD. MB50 - CE RULES - mm. 500 - sn 2108301 - year 2021

Good day! I would like to offer you the following machine: 1 used dresser SCM F 410 - 41 cm planing width - 2.60 m table length - 125 mm knife shaft with 4 knife Centrofix - 4 KW 380 volt motor -Main switch -Circuit breaker - Automatic engine brake - 8 mm chip removal - Joining stop can be swivelled up to 45° - Auxiliary stop - Low-noise design with serrated steel table lips - Suction nozzle 140 mm - Star triangle switch renewed (150,-- € + 19 % VAT) - 4 Leitz-Centrofix knives newly installed (80,-- € + 19 % VAT) - Weight: 750 KG - Price: €4,300,-- + 19% VAT The machine is technically checked, cleaned and adjusted. Cables and plugs available and ready to use. Very good condition. Bank transfer before shipment or cash payment on pick-up. Loading by forklift is not a problem. The machine is sold without any warranty or gu ...

Key data: 410 mm, 2850 mm, 4 St.

Specifications/Equipment: Planing width 410 mm Chip removal max. 8 mm Table length 2,850 mm TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm SUVAmatic planer shaft protection cover electr. Feed table height adjustment Dispensing table with hollow and pointed joint adjustment Stop can be tilted up to 45° Motor power 4 kW Suction nozzle Ø 160 mm Space requirement 2,850 x 1,950 x 1,027 mm Weight approx. 870 kg All information is subject to the actual equipment

: neu : 2024 : 5549 : September 2024, Zwischenv : Taiwan : 55440 € : 1114.34 € : 1 : 610 mm : 600 x 300 mm : 610 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 0 - 2,250 mm/min : 3 - 32 mm : 320 mm : 0.001 : 5,5 kW kW : 0.74 kW : 1 kW : 1 kW : 2950 mm : 1490 mm : 2080 mm : 2200 kg : 355 x 50 x 127 mm : 1.450 U/min : 0,001 - 0,04 mm : 675 mm/min : 0,001 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator automatic dresser over the wheel, with compensation grinding wheel grinding wheel flange grinding wheel balancing stand (roller type) balance arbor LED machine l ...

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7

Description: Magnetic chucks dimensions: approx. 900 x 280 mm Max. Grinding wheel diameter: approx. 250 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 2,580 x 1,500 x 2,000 mm

Description: Incl. machine vice Jaw width: 150 mm Panel dimensions: 800 x 800 mm weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,250 x 800 x 1,000 mm

: neu : 2024 : 5550 : September 2024, Zwischenv : Taiwan : 75100 € : 1509.51 € : 600 mm : 1000 x 400 mm : 1015 mm : 1000 x 400 mm : 670 kg : 1100 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 mm : 450 mm : 0.001 - 32 : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2.000 1/min : 5,5 kW : 1.5 kW : 1.1 kW : 1.1 kW : 3630 mm : 2682 mm : 2200 mm : 4800 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working are ...

Automatic buffing machine for flat panels Table size 4800 x 1400 mm. The machine has got 4 rotating pads mounted on a rotor, speed rotor adjustable Buffing speed bridge adjustable

Automatic buffing machine for flat panels Machine has got 2 alternating operation fields, each with vacuum suction Total table size: 1,35 x 12,00 m. The machine has got 4 spinning coton buffing units mounted on a rotor, speed adjustable 5 to 25 r/min and 4 rotating finishing discs

: gebraucht : 2006 : 5539 : Mai 2024, Zwischenverkauf : Taiwan : 49600 € : 1 : 850 mm : 1000 x 610 mm : 1000 mm : 1000 x 600 mm : 1000 mm : 5 - 25 m/min : 1250 mm/min : 3 - 32 mm : 0.02 : 400 mm/min : 0.001 mm : 1450 1/min : 11 kW : 3.7 kW : 0.37 kW : 20,6 kW : 3700 mm : 4000 mm : 3250 mm : 7400 kg : 1500 kg : 1120 kg : 1500 kg : 355 x 75 x 127 mm : 3 - 32 mm/min Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel Grinding wheel flange machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH NEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WHEEL The data for this ad was created with ModulMWS -  ...

Description: Serial number: B10460 Magnet dimensions: 600 x 300 mm Grinding wheel diameter: 270 mm weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 2,200 mm

Description: Fabrication number: 803088 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 80 A Table diameter: 1000 mm Grinding wheel diameter: 500 mm weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,400 x 3,200 mm

The BRH 20.05 grinder is in good technical condition. Can be seen in operation by appointment. Machine weight: 1950 kg Clamping surface of the table: 230x630 mm Max. grinding length: 630 mm Max. grinding width: 230 mm Max. workpiece weight: 130 kg Machine dimensions lxwxh: 1288 x 2710 mm

: neu : ca. 6 Monate ab Auftragse : Taiwan : 72710 € : 1461.47 € : 445 mm : 460 x 200 mm : 460 mm : 450 x 200 mm : 0,1 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 220 mm : 340 mm : 0 - 3000 mm/min : 0.001 mm : 1000 - 7000 1/min : 3 kW : 0.7 kW : 1.1 kW : 1.1 kW : 2510 mm : 2515 mm : 2010 mm : 1550 kg : 1015 mm : 175 kg : 210 kg : Dm. 205 x 12,7 x 31,75 mm : 0,004 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with T ...

Key data: 520 mm, 250 mm, 5 kW

Used comb. Dressing / Thickening Manufacturer: SCM Type FS 520 Built in 1998 4-Knife Wersa Shaft Planing width 520 mm Total length of dressing tables 2,300 mm Planing height 250 mm Inclination of the joint fence 90° to -45° Power 5.5 kW With engine brake Slotted table lips Weight 980 kg With pneum. Quick changeover system dressing -> thickness -> dressing Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarante ...