surface grinder vertical used for sale

Code 171305 Description CNC surface grinding machine Make DANOBAT Model PSG - 1000 Serial No. 30102 A Control Fanuc 210i - M Year 2001 Tablesize 1000 x 500 mm Grinding surface L x W x H 1000 x 600 x 450 mm Long ( X axes ) 1150 mm Cross ( Z axes ) 500 mm Speed table movement 1 – 30 m/min. Max. distance table – centre grinding wheel 650 mm Max. workpiece weigth 1500 kg Max. table load 1500 kg Magnetical plate size L x W 1000 x 500 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 100 x Ø 127 mm Spindel power 7,5 kW Spindel speed 1500 rpm Motor power 7,5 kW – 380 Volt Total electr.com. 20 kW Total space L x W x H 3950 x 3150 x 2550 mm Weight 5500 kgs Accessoiries Elec. Magneticplate 1000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in g ...

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Scraped surface heat exchanger,stainless steel,APV type 1 VT 460.

Scraped surface heat exchanger,stainless steel,Brogli model Agitemp,9,2 kW gear motor,212 rpm.

Scrabed surface heat exchanger,stainless steel,APV type SSHE,double

Scraped surface heat exchanger,Gerstenberg type Labo Perfektor,4 zones

Scraped surface heat exchanger,stainless steel,Votator,3 hk motor

workpiece diameter: 600 mm workpiece weight: 400 kg workpiece height: 300 mm total power requirement: 35 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 600 mm workpiece height: 450 mm Control: Fanuc 210i - M total power requirement: 20 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3950 x 3150 x 2550 mm CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition  ...

grinding length: 470 mm grinding width: 40 mm workpiece height: 110 mm total power requirement: 1,2 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic copying device: x ja/nein converter: x ja/nein turning speeds: 11000 U/min Number of knives: NA z= Diameter: NA mm Length: mm Shank diameter: mm Motor output: kW Dimensions (L/W/H): mm Vertikal stroke: mm Table dimensions: mm Dust suction hood: mm Diameter of the saw arbor: mm Length of the rolling table: mm Sawblade tiltable: ° milling stroke vertical: mm total power requirement: kw Weight: kg Spindle diameter: mm Length of the planing table: mm Number of heads vertical: St. Number of heads horizontal: St. Number of milling agregates: St. Number of knives: St. Number of sanding units: st. Number of spindles: St. Number of spindle head vertical: St. Number of spindles head horizontal: St. Number of milling spindles: St. : St. Number of tools: St. Working width: mm Year: Speed of boring spindles: U/min. Required air-pressure: bar Dowel insertingunits: St. Electrical height adj ...

grinding length: 3000 mm grinding width: 1250 mm workpiece height: . mm grinding height: 1100 mm Table dimensions: 1100x3150 mm table load: 1050 kg grinding wheel diameter: 457 mm turning speeds: 1200 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stepless automatic feed for table 3-40 m/min Return feed for table Filter attachment Hydraulic unit Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 750 mm grinding width: 500 mm workpiece height: 500 mm total power requirement: 50 kW weight of the machine ca.: 5000 t Grinding length, max. 750 mm Grinding width, max. 500 mm Cross movement of grinding slide 450 mm Working height under grinding wheel, max. 500 mm Grinding wheel size Æ 400 x 100 mm Grinding wheel speeds, infinitely variable 300-3,000 rpm Table speed, hydr. 0 - 30 m/min Table speed, creep feed 0.02 - 1,000 mm/min Vertical infeed, infinitely variable 0.002 - 0.03 mm/stroke Grinding spindle drive, max. 32 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight approx. 5,000 kg Accessories / Special Features Creep feed: Electro-mechanical feed (but also hydraulic table movement), with digital display, programable by cam limit switches. Infinit ...

Thawing transformer make TREKOLUX type EAGYear of construction 2000for thawing frozen water pipesMax. Power: 10AThawing i. Volts - 3 levels: 2.5 / 5 / 10VThawing performance 2,5 V: 400 AMinimum pipe length for 2 pipe: 4 mThawing performance 5V: 400AMinimum pipe length for 2 pipe: 8 mThawing power 10 V: 200 AMinimum pipe length with 1 pipe: 15 mExternal dimensions L x W x H: 350 x 250 x 250 mmWith- 5 m ground cable- 20 m ground cableused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Jung HF50 Vlakslijpmachine €4,750 (EUR) Contact or call +31 (0)73 - 547 87 69 Specifications Manufacturer Jung Model HF50 Use State Capacity 600x200 Status For Sale

Jung JF520 Vlakslijpmachine €20,000 (EUR) Contact or call +31 (0)73 - 547 87 69 Description Grinding length Max. 600 mm Clamping surface of the table 600 x 200 mm Magnet size Max. 500 (max. 600) x 200 mm Maximum distance between table surface and center of the grinding spindle 495 mm Grinding wheel dimensions (TxWxD) 250x25x51 mm Grinding spindle drive 5,5kW Specifications Manufacturer Jung Model JF520 Year 1977 Use State Capacity 600x200 Status For Sale

Jung F-40 vlakslijpmachine €3,750 (EUR) Contact or call +31 (0)73 - 547 87 69 Specifications Manufacturer Jung Model F-40 Use State Capacity 160x400 Status For Sale

Jung JA500CNC-E vlakslijpmachine Contact us for the price Contact or call +31 (0)73 - 547 87 69 Description Year of construction 1991 Control type CNC Grinding length 600 mm Cutting width 200 mm Workpiece height 375 mm Table load 100 kg Grinding wheel dimensions 250x25x51 mm Feed 1-24m/min Speed 4200 rpm Drive motor 5 kW Control SIEMENS 820 G Total power requirement 7.5 kW Machine weight approx. 3.2 t Space requirement approx. 3.7 x 2.1 x 2.1 m²

Double sided sander Stähle Saturn Duo Comfort Technical data Electrical power:11-14 kW (with brushing unit) - sanding motors 2x4,2x5,5 or 2x6,6 kW Compressed air: 8 bar, 400 to 500 l/min Sanding belt speed: 25m/sec Dimensions: Length: 1740 mm Width: 1070 mm or 1270 mm (with cross-cut) Working height: 825mm Workpiece dimensions: Thickness: 10mm min - 150mm max Width: 10mm min - 180-300 mm max Length: 290 mm min - unlimited Exhaust flanges: 2x80mm dia., 2x120 mm dia. (required air velocity 30m/sec at the flanges)

The Stanko 3B70V surface grinding machine was manufactured in 1976 in the USSR. The 3B70V grinder is designed for grinding flat surfaces of various products with a maximum height of 320 mm and a weight of up to 50 kg. The machine has a working table with dimensions (L x W) 400 x 160 mm. The grinding wheel of the grinder has a diameter of 200 mm, and the power of the machine's electric motor is 1 kW. Technical data of the Stanko 3B70V magnetic surface grinding machine - dimensions of the working table (length x width): 400 x 160 mm - grinding wheel diameter: 200 mm - maximum weight of the workpiece: 50 kg - maximum height of the workpiece: 320 mm - electric motor power: 1 kW - dimensions (L x W x H): 1465 x 1950 x 1610 mm - total weight of the Stanko 3B70V grinder: 1500 kg

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Dimensions: Length: 630 mm Width: 400 mm Height: 80 mm

Description: 0   Technical data Number of axis total: 2 Max. forwarding speed: 0.2 - 4 mm/s Measuring ways: longitudinal: 200 mm Vertical: 620 mm Table size: Length: 700 mm Width: 550 mm Height between table and tracer: 110 mm Voltage 50 Hz 3x: 220 Volt Dimensions: Length: 1700 mm Width: 900 mm Height: 1850 mm Various accessories: PC system Calibration accessories Cross table: Length: 200 mm Width: 200 mm Set of tracers Measuring table (Marble)

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Table length: 2080 mm Table width: 1280 mm Table height: 600 mm Dimensions: Length: 2080 mm Width: 1280 mm Height: 900 mm

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Table length: 1200 mm Table width: 800 mm Table height: 165 mm Dimensions: Length: 1400 mm Width: 1000 mm Height: 800 mm Various accessories: Measuring table (Marble) with support

: 0500 mm : 250 mm : 242 mm : 600x280 mm : 355x25x127 mm : 1500 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Dimensions: Length: 630 mm Width: 400 mm Height: 80 mm

The ZVL BRH 40A II surface grinding machine was manufactured by the Czechoslovak concern ZVL, the Powaska Bystrzyca bearing production plant in 1985. The grinder is designed for grinding flat surfaces of various metal products, with a maximum length of 1500 mm, a width of 470 mm and a height of 500 mm. The machine has a work table with dimensions of 400 x 1500 mm and a 7.5 kW spindle, rotating at a speed of 1920 rpm. The total weight of the grinder is 4520 kg. The machine is offered with accessories. Characteristic parameters of the surface grinding machine ZVL BRH 40A II - working surface of the grinding table: 400 x 1500 mm - maximum grinding length: 1500 mm - the longest longitudinal table travel, manual: 1700 mm - maximum width of grinding: 470 mm - maximum height of grinding: 500 mm - the greatest load of the working table: 500 kg - the greatest transverse travel of the  ...

Used dressing Int. Kind. Ref. m3217 Manufacturer Hofmann Type unknown Planing width 510 mm 4-knife shaft Weight approx. 800 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data.B, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, deale ...

Sander: 500 x 200 mm Cooling and Digital

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...

stroke X: 750mm stroke Y: 530mm grinding machine magnetic trays 700/500 mm

The grinder has a set of technical documentation. The photos show the actual condition of the machine. The grinder is fully functional.

Palmary FCL 12-5 Surface Grinding Machine Automatic loading Without tail stock Accuracy : 0.0001 Robot driver Standard grinding range : 1-40 mm diameter Grinding wheel speed. 1900 rpm Machine is in excellent condition

Used Zocca Rpat 650 Hydraulic Tangential Grinding Stone Head with Magnetic Plane 500x300

Heckert machine Maud. SZ 12-10-03/15.2-7.1. machine is in working order. Connected.

Manufacturer Strausak Model U-Grind Year 2018 Machine is in very good condition

technical details of the dressing planer: - Planing width: 310 mm - Total length of the planing tables: 1,400 mm - Diameter of the knife block: 70 mm - TERSA planing knife shaft - Number of knives: 3 - Knife dimensions: 310 x 25 x 3 mm - Rotation speed of the knife shaft: 5,500 rpm - Dimensions of the dressing stop: 1,300 x 150 mm - Swivel range of the dressing stop: 90° - 45° - Maximum cutting depth: 4 mm technical details of the thickness planer: - Dimensions of the thickness planer table: 430 x 310 mm - Capacity height of the thickness planer: 230 mm - Diameter of feed rollers: 30 mm - Maximum cutting depth: 4 mm - Feed speed: 6m/min - Handwheel with analog display for height adjustment - Diameter connection dust extraction: 100 mm - Weight: 280 kg Engine data: - Voltage: 400 V - Engine power: 3.72 kW / 5 hp Transport dimensions (W x D x H): 1,590 x 85 ...

grinding length: 1000 mm grinding width: 50 mm workpiece height: 750 mm total power requirement: 14 kVA weight of the machine ca.: 6000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ELB SHLIFF SWBD-30 VA II surface grinding machine was manufactured in 1970 in Germany. The machine is equipped with an electromagnetic table consisting of three electromagnetic clamping plates, each 3000 mm long and 450 mm wide. It is possible to process workpieces on the work table of the magnetic grinder with a length of up to 3000 mm, width of up to 500 mm and maximum weight of 2000 kg. The grinding height depends on the grinding wheel wear – with a new grinding wheel it is possible to grind the workpiece with a maximum height of 450 mm, while with the used grinding wheel the grinding height is 540 mm. Grinding machine ELB SHLIFF SWBD 30 has also a mandrel for balancing grinding wheels, holders for grinding wheels and electro-automatic magnetic pole switch in electromagnetic plates. The machine underwent a complete overhaul carried out in 2002 by the Polish company JOTES. Tech ...

Surface grinding machine Make: LECHLER Model: 500 x 150

Back grinder for JUNG surface grinding machines, etc. Operating voltage: 24 volts. Magnetic plate: 110 x 75 mm. Angle adjustment: 0 - 2 degrees. Dimensions: 500 x 200 x 125 mm high. In original JUNG wooden cassette, Tools and operating instructions. Weight: approx. 25 kg. Shipping with DHL possible in consultation. Visually, good little used condition. The device can be visited in consultation and is immediately available. Please also note my other entries.

the machine is in operation and has been used minimally tour possible video available

CNC flat and profile grinding machine Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7,100 kg

surface grinding machine, hydraulic magnetic chuck, with travels X 483mm, Y171mm, Z405mm,

Used flat grinder Brand: Churchill GM Magnetic table measures: 1200x330mm Routes: 1200x300x300mm

tool sharpening machine 5 axes Heidenhain hmc 600 control immediate availability year 2005

surface grinding machine, hydraulic magnetic chuck, with travels X 483mm, Y171mm, Z405mm, table 600×160 DIAFORM for grinding wheel shaping