surface grinder vertical used for sale

Key data: 400 mm, 2600 mm

SPECIFICATIONS: Work table size mm: 2600 x 400 Installed capacity: KW 5.0 Complete with hole punch, knives and regulator

Key data: 500 mm, 2800 mm, 4 St.

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...

SECOND-HAND SURFACE PLANER EXCEL LUCK INDUSTRY MOD. MB50 - CE RULES - mm. 500 - sn 2108301 - year 2021

Good day! I would like to offer you the following machine: 1 used dresser SCM F 410 - 41 cm planing width - 2.60 m table length - 125 mm knife shaft with 4 knife Centrofix - 4 KW 380 volt motor -Main switch -Circuit breaker - Automatic engine brake - 8 mm chip removal - Joining stop can be swivelled up to 45° - Auxiliary stop - Low-noise design with serrated steel table lips - Suction nozzle 140 mm - Star triangle switch renewed (150,-- € + 19 % VAT) - 4 Leitz-Centrofix knives newly installed (80,-- € + 19 % VAT) - Weight: 750 KG - Price: €4,300,-- + 19% VAT The machine is technically checked, cleaned and adjusted. Cables and plugs available and ready to use. Very good condition. Bank transfer before shipment or cash payment on pick-up. Loading by forklift is not a problem. The machine is sold without any warranty or gu ...

Key data: 410 mm, 2850 mm, 4 St.

Specifications/Equipment: Planing width 410 mm Chip removal max. 8 mm Table length 2,850 mm TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm SUVAmatic planer shaft protection cover electr. Feed table height adjustment Dispensing table with hollow and pointed joint adjustment Stop can be tilted up to 45° Motor power 4 kW Suction nozzle Ø 160 mm Space requirement 2,850 x 1,950 x 1,027 mm Weight approx. 870 kg All information is subject to the actual equipment

: neu : 2024 : 5549 : September 2024, Zwischenv : Taiwan : 55440 € : 1114.34 € : 1 : 610 mm : 600 x 300 mm : 610 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 0 - 2,250 mm/min : 3 - 32 mm : 320 mm : 0.001 : 5,5 kW kW : 0.74 kW : 1 kW : 1 kW : 2950 mm : 1490 mm : 2080 mm : 2200 kg : 355 x 50 x 127 mm : 1.450 U/min : 0,001 - 0,04 mm : 675 mm/min : 0,001 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator automatic dresser over the wheel, with compensation grinding wheel grinding wheel flange grinding wheel balancing stand (roller type) balance arbor LED machine l ...

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7

Description: Magnetic chucks dimensions: approx. 900 x 280 mm Max. Grinding wheel diameter: approx. 250 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 2,580 x 1,500 x 2,000 mm

Description: Incl. machine vice Jaw width: 150 mm Panel dimensions: 800 x 800 mm weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,250 x 800 x 1,000 mm

: neu : 2024 : 5550 : September 2024, Zwischenv : Taiwan : 75100 € : 1509.51 € : 600 mm : 1000 x 400 mm : 1015 mm : 1000 x 400 mm : 670 kg : 1100 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 mm : 450 mm : 0.001 - 32 : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2.000 1/min : 5,5 kW : 1.5 kW : 1.1 kW : 1.1 kW : 3630 mm : 2682 mm : 2200 mm : 4800 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working are ...

Automatic buffing machine for flat panels Table size 4800 x 1400 mm. The machine has got 4 rotating pads mounted on a rotor, speed rotor adjustable Buffing speed bridge adjustable

Automatic buffing machine for flat panels Machine has got 2 alternating operation fields, each with vacuum suction Total table size: 1,35 x 12,00 m. The machine has got 4 spinning coton buffing units mounted on a rotor, speed adjustable 5 to 25 r/min and 4 rotating finishing discs

: gebraucht : 2006 : 5539 : Mai 2024, Zwischenverkauf : Taiwan : 49600 € : 1 : 850 mm : 1000 x 610 mm : 1000 mm : 1000 x 600 mm : 1000 mm : 5 - 25 m/min : 1250 mm/min : 3 - 32 mm : 0.02 : 400 mm/min : 0.001 mm : 1450 1/min : 11 kW : 3.7 kW : 0.37 kW : 20,6 kW : 3700 mm : 4000 mm : 3250 mm : 7400 kg : 1500 kg : 1120 kg : 1500 kg : 355 x 75 x 127 mm : 3 - 32 mm/min Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel Grinding wheel flange machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH NEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WHEEL The data for this ad was created with ModulMWS -  ...

Description: Serial number: B10460 Magnet dimensions: 600 x 300 mm Grinding wheel diameter: 270 mm weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 2,200 mm

Description: Fabrication number: 803088 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 80 A Table diameter: 1000 mm Grinding wheel diameter: 500 mm weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,400 x 3,200 mm

The BRH 20.05 grinder is in good technical condition. Can be seen in operation by appointment. Machine weight: 1950 kg Clamping surface of the table: 230x630 mm Max. grinding length: 630 mm Max. grinding width: 230 mm Max. workpiece weight: 130 kg Machine dimensions lxwxh: 1288 x 2710 mm

: neu : ca. 6 Monate ab Auftragse : Taiwan : 72710 € : 1461.47 € : 445 mm : 460 x 200 mm : 460 mm : 450 x 200 mm : 0,1 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 220 mm : 340 mm : 0 - 3000 mm/min : 0.001 mm : 1000 - 7000 1/min : 3 kW : 0.7 kW : 1.1 kW : 1.1 kW : 2510 mm : 2515 mm : 2010 mm : 1550 kg : 1015 mm : 175 kg : 210 kg : Dm. 205 x 12,7 x 31,75 mm : 0,004 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with T ...

Key data: 520 mm, 250 mm, 5 kW

Used comb. Dressing / Thickening Manufacturer: SCM Type FS 520 Built in 1998 4-Knife Wersa Shaft Planing width 520 mm Total length of dressing tables 2,300 mm Planing height 250 mm Inclination of the joint fence 90° to -45° Power 5.5 kW With engine brake Slotted table lips Weight 980 kg With pneum. Quick changeover system dressing -> thickness -> dressing Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarante ...

Stanko 800 mm Surface Grinding Machine Machine is made in 1984 but it has been renewed in 2022. -There is a ball screw in both axes. It has a movement sensitivity of -0.001 micron. -Automatic transition program available. -The whole system is new. -All engines are new. -7018 bearings are used in the stone shaft, 4 at the front and 2 at the rear. -Magnetic mirror can move at -3 and +3 degrees. -It has magnetic pickup feature. -Everything is new except the die-cast body. -Stone diameter 500 mm. -Maximum work height 300 mm. -15 KW Spindle motor. -7.5 KW mirror motor. -2x1.5 KW servo motors. Machine is in excellent condition

Description: Serial number 62333 50 Hertz , 400 volts , 1.5 kW , SAV magnetic plate,  ,dimensions 350 x 150 mm , Software version 1.1.2 nd 780 , V max. 40m / S D max. 205 mm , W max. 25 mm , ID 31.75 mm , Travel distance Z-axis 210 mm weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,300 x 1,500 mm

Description: Motor SIEMENS 220/380 V, 0.55 kW, 2770 rpm Magnetic plate 00110-15 B 3, approx. 250 x 150 mm max. grinding wheel diameter 180 mm weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 1,600 mm

Digital display: 2 axes Grinding area: 600 x 250 mm Electro-permanent magnet: 600 x 200 P=4 mm Table load without magnet max.: 250 kg Distance between table and spindle centre: 500 mm Column elevation: 120 mm Overhead dresser dresser Dressing Amount Compensation Automatic Grinding spindle motor: 2.3 - 9.3 kW Grinding spindle speed: 1,000 - 4,000 U-1 Grinding spindle speed control Grinding wheel dimensions A-Ø max x width max x bore: 250x25x50.8 mm Table Clamp Preparation of extraction without suction device Belt filter basins Flanges Grinding wheel Documentation Actuators Voltage: 400 V / 50 Hz Total connection: 10 kVA Machine weight approx.: 2.000 kg Approx. space: 2,600x1,800x2,300 mm

Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER

Weibert SD 510 Dressing thickness planer including spiral knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-SPIRAL

Technische Daten Technical Data Table Surface 460x200 mm Longitudinal / Square 510x225 mm Speed Spindle / Spindle Speed 2850 rpm Grinding wheel 200x25x32 mm Digital Anzeige / Digital Readout Acu Rite If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer

Weibert FS 32 Dressing thickness planer Planing width 320 mm 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables WJ-300100

Description: . weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 1,000 x 2,000 mm

Description: Magnetic plate dimensions: 450 x 250 weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 1,600 x 2,000 mm

Description: Magnetic plate dimensions: 700 x 300 weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,000 x 2,200 mm

Description: Sanding area  ,900 x 375 x 435 mm, serial number 207680988 table surface area l x w : 1550x370 mm, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 2,600 mm

Key data: 500 mm, 2500 mm, 4 St.

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Planer Paolioni PF500 Year of construction 1996 Manufacturer: Paoloni Italy S/N 0006 Working width 500 mm Number of knives / (strip planer knife ): 4 Length of dressing table ( total ) 2500mm both adjustable tables Stop angle adjustable electric brake       Diameter of the extraction nozzle 150 mm Motor 4kW, 380 V, 50 Hz Dimensions length x width x height: 2500x920x1050mm Weight 680 kg CE marked Technical specifications are subject to change Surface planer Paolioni PF500 Year of construction 1996 Manufacturer Paoloni Italy S/N 0006 Working width 500 mm Number of knives / (strip planer knives):  ...

magnetic plate size: 1000x500 mm, grinding wheel width x diameter: 400 mm, grinding wheel turning speeds: 1000 bis 2000 rpm, weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 4,400 x 2,300 x 2,500 mm

Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2130×515 mm Thicknessing table size 960×515 mm Working height 4 - 225 mm 2 feed speeds 9 - 14 m/min Approx. Onsite Dimension. (l x w x h): 215 x 1,100 x 1,250 mm, weight approx.: 820 kg

Description: Planer shaft motor Kw (Hp) 4 (5.5) Planer shaft with 4 knives Ø 110 mm Planer shaft rotation speed 5000 rpm Dust extraction port Ø 120 mm Flush worktable dimensions 2040×410 mm Thicknessing table size 960×410 mm Working height 4 - 225 mm 2 feed speeds 8 - 14 m/min Approx. Onsite Dimension. (l x w x h): 2,100 x 1,000 x 1,250 mm, weight approx.: 690 kg

Pelion gas grill, grill surface: 580 mm x 340 mm, total dimensions: 680 mm x 540 mm x 500 mm.

Pelion gas grill, grill surface: 580 mm x 340 mm, total dimensions: 680 mm x 540 mm x 500 mm.

Surface grinding machine, used, with magnetic plate, puller, holders, coolant device, ...

Price example : FS310PS - New , carbide planer shaft dia. 75mm, thickness planer height: 5 - 240mm: 1900,- net

Surface grinder BPH 320A/1000

Description: 30 x LED Panel - Round - 30W - Surface-mounted - Frame color: white - 6500K (cold white) - Dimensions: 280mm x 28mm - LED SMD - (AC220-240V) - LED Driver included - Lifespan: 30,000 hours - Beam angle: 120 degrees - included mounting kit Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 30 kg

Description: 30 x LED Panel - Round - 30W - Surface-mounted - Frame color: white - 3000K (warm white) - Dimensions: 280mm x 28mm - LED SMD - (AC220-240V) - LED Driver included - Lifespan: 30,000 hours - Beam angle: 120 degrees - included mounting kit Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 30 kg

Description: 80 x Surface panel 18W LED SMD round - 6500K (cold white) - 1530 lumen - Dim. 225mm x 32mm - (AC220-240V) -Includes LED SMD driver - lifespan of 30,000 hours - beam angle: 120 degrees - including wall mounting. Approx. Onsite Dimension. (l x w x h): 1,220 x 940 x 480 mm, weight approx.: 110 kg

Description: 80 x Surface panel 18W LED SMD square - 6500K (cold white) - 1530 lumen - Dim. 211mm x 28mm - (AC220-240V)50/60Hz -Including LED driver - lifespan 30,000 hours - beam angle: 120 degrees - including wall mounting. Approx. Onsite Dimension. (l x w x h): 1,220 x 940 x 1,440 mm, weight approx.: 330 kg

Description: 80 x LED Panel Surface Mounted 12W - LED SMD - square - 6500K (daylight) - 960 Lumen - Dimensions: 160mm x 28mm - (AC220-240V) 50/60 Hz - Driver included - IP20 - Lifespan: 30,000 hours - Beam angle: 40 degrees - Mounting kit included - Suitable for indoor use Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 32 kg

Description: 80 x LED Panel Surface Mounted 12W - LED SMD - Round - 6500K (daylight) - 960 Lumen - Dimensions: 160mm x 28mm - (AC220-240V) 50/60 Hz - Driver included - - IP20 - Lifespan: 30,000 hours - Beam angle: 40 degrees - Mounting kit included - Suitable for indoor use Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 32 kg

Description: 30 x LED Panel - Round - 30W - Surface-mounted - Frame color: black - 3000K (warm white) - Dimensions: 280mm x 28mm - LED SMD - (AC220-240V) - LED Driver included - Lifespan: 30,000 hours - Beam angle: 120 degrees - included mounting kit Approx. Onsite Dimension. (l x w x h): 350 x 700 x 400 mm, weight approx.: 30 kg

Inv. Num. : 7462 Type: G130 Producer: Göckel Created: 1987 Parameters: Control system: Sinumerik 810 Table length: 7500 mm Table width: 1000 mm Machine height: 3500 mm Machine length: 15000 mm Machine width: 3500 mm Machine weight: 45000 kg Equipment: 500 ceramic and 500 bakelite grinding segments 2016: Conversion of the control system to Sinumerik 810

Inv. Num. : 7463 Type: G80 Producer: Göckel Created: 1987 Parameters: Table length: 3100 mm Table width: 400 mm Machine height: 2000 mm Machine length: 8000 mm Machine width: 3000 mm Machine weight: 14000 kg

Inv. Num. : 7464 Type: G100 Producer: Göckel Created: 1987 Parameters: Table length: 2500 mm Table width: 600 mm Machine height: 2300 mm Machine length: 7000 mm Machine width: 3000 mm Machine weight: 14000 kg

ELB Perfect BD 10 750, grinding area 1000 x 750 mm, year of construction 2004, grinding spindle 10 KW, grinding wheel 400 x 100 mm, automatic dresser with compensation, electric perm magnetic clamping plate 1000 x 750 mm, partial enclosure with suction, water tank with paper belt filter, the machine is partially overhauled, geometry according to the standard of new machine, we are happy to take over the installation / training on site, as well as the subsequent service.