surf used for sale

Surface reference plates, roughness measures MASSI turning TGL 4763 Rz 3.2 μm - Rz 80 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surfaces reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.8 μm - Rz 20 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.63 μm - Rz 2.5 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.1 μm - Rz 0.4 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surfaces reference plates, roughness measures MASSI planing TGL 4763 Rz 1.0 μm - Rz 10 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surfaces reference plates, roughness measures MASSI turning TGL 4763 Rz 6.3 μm - Rz 80 μm in wooden box Dimensions: 240 x 125 x 30 mm

Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 1.6 μm - Rz 20 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI hobing TGL 4763 Rz 6.3 μm and Rz 20 μm in wooden box Dimensions: 240 x 120 x 30 mm

Surfaces of reference plates, roughness measures MASSI planing TGL 4763 Rz 10 μm - Rz 80 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surfaces Reference plates, roughness measures MASSI planing TGL 4763 Rz 6.3 μm - Rz 160 μm in wooden box used, tested ! Dimensions: 345 x 125 x 35 mm

Surface reference plates, roughness measures MASSI end milling machines TGL 4763 Rz 6.3 μm - Rz 80 μm in wooden box used, tested ! Dimensions: 345 x 125 x 35 mm

Surface comparison plate set, roughness measures MASSI Planing, face milling, turning TGL 4763 Planing: Rz 6,Rz 3 μm - Rz 160 μm Face milling: Rz 6.3 μm - Rz 80 μm Turning: Rz 3.2 μm - Rz 80 μm in 3 wooden boxes used, tested ! Dimensions: 345 x 125 x 105 mm

Surface reference plates, roughness measures MASSI planing TGL 4763 Rz 6.3 μm - Rz 160 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surface reference plates, roughness measures MASSI hobbing hobs TGL 4763 Rz 6.3 μm - Rz 20 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface-mounted thermostat JUMO ATHs-2 409127 0 - 50 C 230 V IP 54 New ! Dimensions: 450 x 370 x 200 mm

Electrostatic surface cleaning DR. ESCHERICH STATIK-AIR 08 width 130 cm with extraction KIST MASCHINENBAU ESUC 111-NC 400 V without conveyor belt ! Dimensions: approx. 1300 x 700 x 660 mm used, tested !

Key data: 500 mm, 2800 mm, 3 St.

SPECIFICATIONS: Working width: max. 500 mm 2 tables with a total length of: 2800 mm Installed power: 5 kW Roller with 3 knives

Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

ELB SURFACE GRINDER 460x2440mm CNC Dresser

Key data: 400 , 800 , 1000

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11" cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 face slide travel: 290 mm upper slide travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 2,25/3,25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1000 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 oder 400 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO

Travel paths X/Y/Z: 900 x 400 x 200 mm Table size 800 x 400 mm

Key data: 520 mm, 1750 mm, 4 St.

Surface planing machine 520mm Planing width, support table 1750mm, removal table 1150mm. - Aigner strip planer stop - Angle stop 90° -45°

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake  ...

Manufacturer: CNC Model: Speedform RapidCleaner Year of Manufacture: 2017 Function: Fully automatic cleaning device for laser sintering processes. Benefits: - Simplifies, speeds up, and improves the cleanliness of sintered part cleaning. - Reduces or eliminates manual cleaning efforts. - Effective even in small and deep areas. Find more here - .ucymachines/ Contact us at - sales@ucymachines

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm center height over bed: 125 mm centre distance: 550 mm bed width: 135 mm spindle bore: 26 mm turning speed range - stepless: 50 - 2.000 U/min power requirement: 750 W 3-jaw-chuck diameter: 125 mm taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 70 mm voltage: 230 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,25 x 0,60 x 0,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3986 SURFACE GRINDING MACHINE Manufacturer: SEEST , Type: Surface grinder Specifications: Large stone diameter 350 mm Automatic feed. Length: 1500 mm, Height: 1200 mm, Width: 800 mm , Weight: 1000 kg

Surface Grinding Machine ABA FFV 1000/50 Travel X: 1000 mm Travel Y: 500 mm Travel Z: 400 mm Magnetic chuck dimensions: 1000 x 400 mm Auto stepover X / Y / Z Separate electrical panel Separate lubricant tank Separate hydraulic group Voltage: 380 V Length: 4000 mm Depth: 1700 mm Total height: 2300 mm Weight: approx 6 T

grinding length: 600 mm grinding width: 205 mm x-travel: 600 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface grinding machine ELB type SW 3 HA JuwelMasch. No. 51810465 year of construction 1965Grinding area 300 x 150 mmClamping surface 300 x 150 mmElectromagnet 300 x 150 mmDistance spindle center - magnet approx. 350 mmGrinding wheel diameter 175 mmGrinding wheel width max. 25 mmGrinding wheel speed 2800 rpm. Grinding spindle drive 0.75 kWNetz connection 380 volts, 50 Hz.- manual and automatic table - transverse adjustment (0.02 mm per graduation) - manual transverse adjustment via handwheel, travel distance per handwheel revolution, Y -

Vertical Grinding Machine, Surface Grinding Machine DORMAC / DORIA Type PerseoCup Grinding MachineFabr. No. 786 Year of construction 1987Grinding area 500 x 250 mmMagnet 400 x 150 mmGrinding height Grinding wheel - magnet approx. 190 mmGrinding height Grinding wheel - clamping surface Table approx. 235 mmGrinding wheel diameter 175 mmTable longitudinal movement approx. 600 mmGrinding wheel speed approx. 2800 rpm. Motor power approx. 2.2 kWNerg connection 380 volts, 50 Hz manual depth delivery via handwheel, travel per

x-travel: 600 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

magnetic clamping plate: 1400 - 700 mm weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table diameter: 800 mm grinding height: 1200 mm grinding head - power requirement: kW total power requirement: 30 kW weight of the machine ca.: 8500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.