128,877 used machines on RESALE, but how to find them? Machine Search
Generators of 100 kVA (hood unit) power: 100 kVA / 80 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF45TE2F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 4-L Total displacement: 4.5 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 22.6 l / h Fuel consumption 75% PRP: 18.5 l / h Fuel consumption 50% PRP: 13.4 l / h Oil consumption under full load: 0.1% of fuel consumption Control: Mechanical Inner diameter output exhaust pipe: 70.3 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation ...
electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7
unicraft Generator PG 800 TRA Product Name: Synchronous Generator Type: PG 800 TRA Manufacturer: unicraft Item number: 6701083 Year of construction: 2021 Condition: New technical details drive: - Drive motor: Honda GX390 - Starter: Hand start (wire rope hoist) - Fuel type: Petrol - Tank capacity: 11 liters - Consumption at 75% load: 2.2 l/h - Sound pressure level (Lp): 72 dB(A) - Sound power level (Lw): 97 dB(A) technical details power generators: - Type: nsm-ZR100-SC Synchronous - Rated voltage: 230 / 400 V - Apparent power at LTP: 5500 / 8300 VA - Active power at LTP: 4.9 / 6.6 kW - Apparent power at COP: 4100 / 7000 VA - Active power at COP: 3.7 / 5.6 kW - Protection class of the generator: IP 23 - Sockets: 1 x 230 V Schuko, 16 A / 1 x 400 V, 16 A - Protection class of the sockets: IP 44 - short-term power up to 3 times the rated power possible (LTP = ...
Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price ! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase ...
1 STERLING STERLCO used diathermic oil boiler with electric heating type S-9026-J0 serial nr. 95E5517 Dual zone Heating Capacity Zone 1: 18 KW Heating Capacity Zone 2: 36 KW Total Heating Capacity: 54 KW Pump Motor (Zone 1): 1.5 KW / 2 HP Pump Motor (Zone 2): 1.5 KW / 2 HP complete with circulation pumps and high accurency temperature controlers 1" oil circulation pipes (up to 110 L/min) 1" vent pipes (up to 110 L/min)
Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine ...
High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).
Technical details drive: - Propulsion: Yanmar L100N - Starter: E-start (starter) - Number of cylinders: 1 - Fuel type: Diesel - Fuel tank capacity: 24 litres - Engine oil: 1.65 litres - Forced lubrication - Forced cooling - Fuel consumption at 75% load: 1.4 l/h - Sound pressure level (Lp): 67 dB(A) - Sound power level (Lw): 93 dB(A) Technical details Power generator: - Nominal voltage: 230 / 400 V - Apparent power at LTP: 3,200 / 6,900 VA - Active power at LTP: 2.5 / 5.5 kW - Apparent power at COP: 3,000 / 5,600 VA - Active power at COP: 2.4 / 4.5 kW - Generator protection class: IP 23 - Sockets: 1 x 230V Schuko / 2 x 230V, 16A / 1 x 400V, 16A - Protection class of sockets: IP 44 (LTP = time-limited generator power (max. power of the generator within 500 h/year with a continuous operation of the generator of 300 h), COP = aggregate continuous output with unlimit ...
Capacity: 4800 kg Lifting height: 3850 mm Free lift: 1590 mm Battery: 80 V, 805 Ah Operating time: 5 h Lateral valve adjustment weight: 4800 kg Tyres: 4 wheel, solid rubber Length: 3100 mm Width: 1500 mm Height: 2700 mm
Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.
LHS Lagertechnik, supplier of new and used storage technology. We provide you with racking systems, industrial trucks, accessories and other warehouse inventory. In this ad, you will buy as follows: Sweeper - Manufacturer: DULEVO - Type: 1100 EH - Year of construction: 2004 - Serial number: 100EH00632/04 - Drive: Electric - Operating hours: 1,816 h - Operating length: 1,800 mm - Operating width: 1,200 mm - Net weight: 1,300 kg - Battery: 36V - NEW UVV Particularities: -Roofed - Light package with turn signals and hazard lights - Integrated shake function - Ergonomic emptying - Side brush & sweeper roller are new! The device works perfectly and can be tested on site. Self-collectors are welcome. Free loading. Shipping can be organized nationwide – please ask for your transport costs. Errors and prior sale of used goods are expressly re ...
Electric stroke cylinder RACO T1A61169, pressure 1000 daN, adjustment distance 400 mm
Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550?C useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW
LHS Lagertechnik, supplier of new and used storage technology. We provide you with racking systems, industrial trucks, accessories and other warehouse inventory. In this ad, you will buy as follows: Sweeper - Manufacturer: DULEVO - Type: 75 EH - Year of manufacture: 2011 - Serial number: 075EH001743/00 - Drive: Electric - Operating hours: approx. 420 - Net weight: 450 kg - Battery: NEW Particularities: - Side brush & sweeper roller are new! The device works perfectly and can be tested on site. Self-collectors are welcome. Free loading. Shipping can be organized nationwide – please ask for your transport costs. Errors and prior sale of used goods are expressly reserved.
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. ...
used
Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
CrimpOne C1-25sE Servo electric hose press with spindle drive Technical data Main technology: AC-servo ball screw Maximum pressing force: 250kN Crimping range: 10-54 mm Max tube size: 1¼ inch Master matrix D / l: 84 / 78 mm Servo motor: 5 kW Repeat accuracy: 0.01 mm Maximum opening: + 100 mm Maximum feed channel: 45 mm Maximum speed: 80 mm / s Maximum opening speed: 80 mm / s Max Crimpgeschwindigkeit: 10 mm / s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7
1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...
Manufacturer: Siemens Type: 1LA6 186-4AA71 22.0 kw
TECHNICAL DATA: Handling System Linear Meters: about 135,38 Working width mm: 600 - linear meter 16,5 Working width mm: 650 - linear meter 29 Working width mm: 670 - linear meter 16 Working width mm: 700 - linear meter 58,4 Working width mm:1030 - linear meter 3,48 Electrical Panels: 03
Key data: 6400 , 8000 , 11000
12.8 MW WARTSILA HFO fired power plant 18V32LN x 2, 6.52 MW / 11 KV / 60 Hz , Year 1998, Running hours : 27000 , may convert to 50 Hz if required. It is possible to covert as Dual Fuel generator ( Gas / Diesel or HFO )
electrically operated chamber furnace with air circulation , as good as new electric heated chamber furnace with air circulation, as good as new Type: EKO - 60/40/150-36 Year built/year: 2010 Fabr./ make: IOB Aue/ Germany Working space/ inner space 600 x 1500 x 410 mm Temperature range/ range of temperature: 500°C Connection value Electr./ electr.power: 38 kW Weight / weight: about 2.5t https://www.west-cs.de/produkte/modelle/ks-90-1-einkreisregler/
Used Electric Motors – As-Is Condition | Fixed Price per Kilogram We offer a large and diverse batch of used electric motors, originating from various well-known manufacturers. These motors vary in size, power, and configuration, including standard IEC motors, specialized industrial motors, and customer-specific models. The full list includes over 150 units, all clearly labeled by type and model. These electric motors are sold strictly in their current condition (as-is). They have been visually inspected for identification and listing purposes and came of running installations. Key Notes: Condition: As-Is (used, untested, without warranty) Pricing: Offered at a competitive fixed price per kilogram (P/KG) Packaging: All motor packages are prepared by HOS BV Volume: Large, mixed batch of units; ideal for resellers, refurbishers, or parts recovery For a full list of motor typ ...
Two three-phase motors 380-415 V - 50 Hz 0.9 KW - 2820 RPM Protection class IP 20 Never been in use
Manufacturer: Kemppi (Finland) Power: 5 - 300 Amp semi-automatic electrode welding machine Welding pliers new! (length approx. 4.70 m) Ground cable new! (length approx. 3.70 m) Connection cable 5 pole new! (length approx. 2.90 m) Note: There are 3 equivalent devices in stock! The price refers to the unit price! (Changes and errors in the technical data and prices reserved!)
Key data: 8 KW, 3 kVA, 400 V
Gasoline Generator SEB 7500WD-AVR Frequently requested 400/230 volt frame unit for commercial use a, construction, service and agriculture as well as for private emergency power supply. With AVR control for sensitive consumers and high unbalanced load capacity thanks to oversized generator. Specifications Voltage - Frequency 400 / 230 / 50 V/Hz Maximum power 3~400V 8 kVA Continuous power 3~400V 7.2 kVA Power 3~400V cont. 10 A Maximum power 1~230V 3.8 kVA Continuous power 1~230V 3.4 kVA Power: 1~230V cont. 14.4 A Fuel Type: Gasoline Speed 3000 rpm Cooling air-cooled Engine type: Honda GX 390 Emission stage 5 Motor power 8.2 kW Displacement 389 cm³ Cylinder 1 Fuel tank capacity 6.1 l Consumption at 75% load 2.8 l/h Runtime per tank filling at 75% load 2.2 h Dimensions LxWxH 830x510x560 mm Weight (without fuel) 91 kg Sound power corresponding. Directive ...
MEILLER TIGER LIFT Electric lifter 1000kg All data on photo. Machine was almost unused. New two batteriess and integrated charger.
DH Robotics AG-160-95 Adaptive Electric Gripper with Connector - with Brake Net weight: 1000 g Payload: 3000 g Delivery time 5-10 days! With a stroke of 95mm, the DH Robotics AG-160-95 gripper is an adaptable and versatile two-finger solution that can handle a wide range of object shapes and sizes. This adaptability allows the user to avoid having to install new grippers when the application (or the manipulated object) changes. Designed from the ground up for collaborative solutions, the DH Robotics AG-160-95 comes with ready-to-use plugins for most major cobot brands (Universal Robots, OMRON, Hanwha, etc.). Discover how this advanced but advanced gripper from DH Robotics can change the way you work! Properties The DH Robotics AG-160-95 is an adaptive two-finger gripping solution and offers advanced, adaptive gripping at an affordable price. With a recommended payload ...
DH Robotics AG-105-145 Adaptive Electric Gripper with Connector (with Brake) Net weight: 1300 g Payload: 2000 g With a stroke of 140mm, the DH Robotics AG-105-145 gripper is an adaptable and versatile two-finger solution that can handle a wide range of object shapes and sizes. This adaptability allows the user to avoid having to install new grippers when the application (or the manipulated object) changes. Designed from the ground up for collaborative solutions, the DH Robotics AG-105-145 comes with ready-to-use plugins for most major cobot brands (Universal Robots, OMRON, Hanwha, etc.). Discover how this advanced but advanced gripper from DH Robotics can change the way you work! Properties The DH Robotics AG-105-145 is an adaptive two-finger gripping solution that offers advanced, adaptive gripping at a price. With a recommended payload of 2 kg and a stroke o ...
Used from plant disassembly. Siemens Simodrive Posmo-SI with Alpha gearbox Engine: 6SN2500-2BF00-0GG0 Transmission: TP 050-MF1-5 -071-000 Dimensions L x W): approx. 65 x 25 cm The machine is electrically tested before sale and receives a DIN VDE 0113 test report.
DH Robotics CGC-80-10 Centric Electric Gripper - with Brake The DH Robotics CGC-80-10 is an advanced three-finger gripper designed for industrial environments that require precision. With a stroke of 20 mm and a recommended payload of 1.5 kg, the three-finger design of the CGC-80-10 offers the ability to pick up and place hard-to-grasp objects such as those with spherical or cylindrical shapes. The DH Robotics CGC-80-10 offers exceptional ease of use. Plug-ins are available for Universal Robots, OMRON, Hanwha and more. New More details and pictures on request. The amount indicated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT. Delivery time 5-10 working days!
Spindle motor, electric motor Manufacturer: Baumüller Type: GNAF 132 MV Leistubg: 26kW Rotational speed 1600-3000 rpm 76A 400V
weight max. in kg: 2000 kg tool adaptor: Kugelkopf stroke height: 200 mm battery: 24 V / 240 Ah weight: Batterie: 204 kg weight of the machine ca.: 320 + 204 Kg dimensions of the machine ca.: 1,1 x 1,2 x 1,4 m • Charger, last UVV -check 01/2009, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Extraction system for wall mounting Manufacturer Plymoth Special electrostatic precipitator system without paper filter! Type EFO5000 Electrostatic precipitator, function via electrical charging of dust particles. Used to extract oil mist. Details according to photos. Special price
Electric motor ALMO MTA 132 SX2 recon Ball bearings renewed from the rotor. Seals renewed. The engine has slight traces of smoke but is in an overhauled and installable condition. Data from the engine see pictures.
Electric tow tractor Manufacturer: MOVEXX Type: T 1000 The electric tow tractor can be used in numerous areas. Think about internal and external logistics; however, the machine can also be used to move containers in waste management. The TT1000-T can also move a variety of different types of trolleys, such as roll containers, industrial trolleys and aforementioned waste bins. Technical data pulling aid: 300W / 800 N Weight without battery: 40 kg Year of construction 2020 including battery charging station Maximum weight to pull: 1,000 kg Battery specifications: Lithium battery: LITHIUM LIFePO4 24V / 36 Ah / 922 Wh Year of Make: 2020 Weight: 11.9 kg Condition & accessories, see original pictures! If you have any questions, email or call.
Electric motor AEG IP 54 Year of construction 1991 Type AM180LC 22kW Price 250,00€ net
Electric motor AEG IEC 225M IMB 5 Year of construction 1996 Type AM 225 MC 404 52kW Price net 250
Electric motor AEG type 1LA6 1864AA71 Year of construction 1987 22kw Price 250€ net
maximum number of results exceeded
please refine your search
