superior electric used for sale

Three-phase motor, electric motor -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP54 -Dimensions: 390/300/H245 mm -Weight: 43 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 725 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 550/410/H305 mm -Weight: 97 kg

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motorized winch, tackle, pulling winch, block and tackle, cable winch -For passenger transport and loads: up to 500 kg -E-motor: Greifzug type C80/9-2FL 1.8 kW -Brake: Greifzug FDB 13 CHR 16 Nm -Rope speed: 18 m/min -Rope: Ø 8 mm -Rope length: 143 m -with: Rope length measuring device -Dimensions: 700/460/H600 mm -Weight: 78 kg

Sewing machine motor, lighting current motor, electric motor -Manufacturer: Pfaff, sewing machine motor type PCD 321 -Power: 0.245 kW -Speed: 2800 rpm -Voltage: 220/380 V 50 Hz -Shaft: conical Ø 11/15 x 21 mm -Sewing light connection: 12 V 15 W -Dimensions: 340/190/H320 mm -Weight: 19 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/420/H340 mm -Weight: 124 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 550/360/H370 mm -Weight: 121 kg

Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 270/230/H200 mm -Weight: 16 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1445 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 450/265/H410 mm -Weight: 79 kg

This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It features a clamping force of 3430 kN, screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it represents a robust choice for precision molding. Contact us for more information about this machine.

three-phase motor, electric motor -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg

Three-phase motor with 2 speeds, electric motor -Power: 3/5.2 kW -Speed: 720/1450 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 510/370/H300 mm -Weight: 92 kg

Electric motor, three-phase motor -Power: 5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 530/370/H280 mm -Weight: 80 kg

Electric motor, three-phase motor with 2 speeds -Power: 2.1/7 kW -Speed: 930/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 450/260/H330 mm -Weight: 48 kg

Three-phase motor with 2 speeds, electric motor -Handover in its current condition as inspected -Foot: damaged, see photo -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Dimensions: 710/350/H450 mm -Weight: 179 kg

Three-phase motor with 2 speeds, electric motor -Power: 1.7/7 kW -Speed: 720/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 480/330/H270 mm -Weight: 74 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 44 -Number: 2 electric motors available -Price: per piece -Dimensions: 450/340/H260 mm -Weight: 47 kg

electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 Quantity: 1 piece available -Dimensions: 385/320/H265 mm -Weight: 41 kg

3 Containers - Power Generators MTU 16V4000G63 Total power in parallel operation: 6750 kVA Single power: 2250 kVA Year: 2015, installed in container 2023 Operating hours: approx. 1600 / 1600 / 2600 Cooling: Water with radiator Speed: 1500 1/min Tank: approx. 4600 liters Voltage: 400/231 V, 50 Hz Switchgear: Control DEIF AGC4-MK2, also for parallel operation, circuit breaker 4000 A Subject to prior sale - errors possible! Internal reference number: E-1004-109

Three-phase motor, electric motor -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 mm -Height of shaft axis: 200 mm -Design: B3 -Protection class: IP 54 -Dimensions: 750/380/H490 mm -Weight: 287 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP44 -Quantity: 1 piece available -Dimensions: 440/340/H260 mm -Weight: 56 kg

Item condition: Little used, very good condition Country of origin Germany Application: Steel, Product type Wire Feeder Welding Machine Special features Inert gas, water-cooled Welding process MIG / MAG Welding current 50 - 400 A. Welding voltage MIG 16.5 - 34 V. DV case WEGA DRIVE 4. With intermediate hose package, welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. Dimensions: Length x Width x Height: 1050 x 560 x 1100 mm

Electric motor, three-phase motor -Power: 3.7 kW -Speed: 2900 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: -Price: per piece -Number: 1x available -Dimensions: 460/320/H285 -Weight: 55 kg

The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece weight (max.): 1,000 kg X-axis travel distance: 600 mm Y-axis stroke: 400 mm Z-axis stroke: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Width (max.): 1,050 mm X-axis feed: 600 m/min Y-axis feed speed: 1,000 m/min Table load: 1,000 kg Equipment: refrigerator, compressor

Electric motor, three-phase motor with 2 speeds -Power: 2/6 kW -Speed: 965/1455 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 480/320/H260 mm -Weight: 69 kg

three-phase motor, electric motor -Power: 7.5 kW -Speed: 1400 rpm -Shaft: Ø 22 mm -Design: B5 -Protection class: IP 44 -Recess: Ø 250 mm -Dimensions: 475/370/H350 mm -Weight: 70 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 3x available -Dimensions: 460/320/H260 mm -Weight: 58 kg

8 Pieces Diesel Container Power Generator Engine Type: Caterpillar 3516 Power: 1825 kVA each Year: 2011 2024/2025 newly built and tested machine sets, no operating hours after that! Cooling: Water with radiator cooler Speed: 1500 1/min Generator: Caterpillar SR5 Voltage: 400/231 V, 50 Hz With EMCP 3.2 controller Subject to prior sale - errors possible! Internal reference number: E-1004-110

Three-phase motor with 2 speeds, electric motor -Power: 4/16 kW -Speed: 740/1470 rpm -Shaft: Ø 48 mm -Construction: B3 -pole changing -Protection class: IP 33 -Dimensions: 650/450/H365 mm -Weight: 167 kg

Three-phase motor with 2 speeds, electric motor -Power: 7/20.5 kW -Speed: 975/1460 rpm -Shaft: Ø 48 mm -Construction: B3 -pole changing -Protection class: IP 54 -Dimensions: 690/430/H360 mm -Weight: 186 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 710 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 490/340/H260 mm -Weight: 63 kg

Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details.

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3.5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 470/350/H300 mm -Weight: 62 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 490/325/H270 mm -Weight: 71 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 480/310/H270 mm -Weight: 70 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 1450 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 650/440/H350 mm -Weight: 142 kg

Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details.

Electric motor, three-phase motor with 2 speeds -Power: 3/9 kW -Speed: 960/1450 rpm -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Quantity: 1 available -Dimensions: 585/320/H390 mm -Weight: 110 kg

electric motor, three-phase motor -Power: 5 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Design: B5 -Protection rating: - Price: per piece -Quantity: 1 available -Dimensions: 440/360/H305 mm -Weight: 69 kg

Three-phase motor, electric motor -Power connection: 3x 220 volts -Power: 3.6/4.4 kW -Speed: 1440/2890 rpm -Shaft: Ø 30 mm -Design: B3 -Protection class: IP 33 -Quantity: 1 available -Dimensions: 570/260/H230 mm -Weight: 35 kg

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg

Brake motor, three-phase motor, electric motor -Motor: with brake -Power: 2.2 kW -Speed: 920 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Brake: 380 V -Number: 1x available -Price: per piece -Dimensions: 580/270/H330 mm -Weight: 82 kg

Electric motor, three-phase motor -Power: 2.1/7 kW -Speed: 975/1450 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 495/297/H340 mm -Weight: 53 kg

electric motor, three-phase motor -Power: 6.8 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: EX -Dimensions: 490/340/H260 mm -Weight: 73 kg

indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Handover: in the current condition as viewed -Condition: Operation is missing a switching element (can be installed for an additional charge) -Engines: tested and OK -Nominal load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1425 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 -Number: 2x electric motor available -Price: per piece -1x: Fan cover defective -Dimensions: 420/247/H300 mm -Weight: 40 kg

Electric motor, three-phase motor -Power: 18.5 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 600/320/H410 mm -Weight: 134 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 32 mm -Construction: 1x B5 6x B3 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 450/250/H310 mm -Weight: 57 kg