superior electric used for sale

Three-phase motor with 2 speeds, electric motor -Power: 1.3/3.8 kW -Speed: 975/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 44 -Price: per piece -Number: 5x available -Dimensions: 330/232/H200 mm -Weight: 18.8 kg

This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-44803-174

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1245 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 445/255/H295 mm -Weight: 51 kg

Three-phase motor, electric motor with 2 speeds -Power: 1.25/4.2 kW -Speed: 970/1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -pole changing -Dimensions: 440/350/H265 mm -Weight: 62 kg

This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine.

Electric motor, three-phase motor -Power: 4 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 430/360/H285 mm -Weight: 58 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1435 rpm -Shaft: Ø 38 mm -1x design: B3/B5 -1x design: B5 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 480/285/H335 mm -Weight: 69 kg

Electric motor, three-phase motor with 2 speeds -Power: 2.2/1.5 kW -Speed: 720/1430 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 455/430/H370 mm -Weight: 80 kg

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

AEG three-phase motor electric motor / 4 KW / 1410/1710 minProduct descriptionManufacturer: AEGType: AM 112 MZ 4Condition: used, baker's conditionDetails see pictures.

Three-phase motor, electric motor -Power: 4 kW -Speed: 2840 rpm -Shaft: Ø 30 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 560/250/H215 mm -Weight: 55 kg

Electric motor, three-phase motor -Power: 5.5kW -Speed: 1730 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 1 piece available -Dimensions: 420/340/H265 mm -Weight: 64kg

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

Working electric cooking block stainless steel approx. 140x85x80t cm, oven SIEMENS, 4 integrated hotplates, drawer block, shelf compartment

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 19 mm -Design: B5 -Protection class: IP 54 -Dimensions: 250/200/H195 mm -Weight: 10.6 kg

This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, its designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information.

weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 3200 mm high: 2060 mm weight of the machine ca.: 0,8 t dimensions: 1,95 x 0,86 x 2,06 m Pallet truck with inklude charger ve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This FANUC Roboshot S150iA was manufactured in 2015. Its an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 0.7-5.5 kW -Speed: 190-1500 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 22 -external fan -Dimensions: 1140/600/H520 mm -Weight: 346 kg

Electric motor, three-phase motor -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Manufacturer: Dietz, electric motor type DR 71 b / 2p -Power: 0.55 kW -Speed: 2800 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 240/180 / H140 mm -Weight: 7,8 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 22 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 530/330/H260 mm -Weight: 51 kg

Three-phase motor, electric motor -Power: 0.75 kW -Speed: 1420 rpm -Shaft: Ø 22/18 mm -Construction: B5 -Protection class: - -Dimensions: 340/160/H200 mm -Weight: 15.4 kg

Three-phase motor, electric motor -Power: 5.2 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 450/340/H270 mm -Weight: 65 kg

Key data: 1 KW

The Bonfiglioli BN80B4 is a three-phase asynchronous motor with aluminum housing designed for a wide range of industrial applications. Core technical features Power: 0.75 kW (equivalent to approx. 1 HP). Speed: approx. 1400 rpm (at 50 Hz) or 1720 rpm (at 60 Hz). Number of poles: 4-pin. Voltage: 230/400V (50 Hz) or 265/460V (60 Hz) as standard. Rated current: approx. 1.85 A (at 400V). Degree of protection: IP55 (standard), optionally up to IP56 possible. Efficiency class: IE1.

Three-phase motor, electric motor -Power: 4 kW -Speed: 2900 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 410/250/H270 mm -Weight: 40 kg

Electric motor, three-phase motor -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Voltage: 500 volts -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Dimensions: 540/340/H270 mm -Weight: 50 kg

Big Ass Battery Test Unit The battery storage system has a capacity of 195kWh. It is about 2 years old with very few operating hours. The whole thing comes from a development/test environment and is ideal for energy storage projects, electric vehicles Charging technology, prototyping or parts Extraction. It has just been serviced by Big Ass Battery, including protocol and is therefore immediately ready for use.

Electric motor, three-phase motor -Power: 5.0 kW -Speed: 1445 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 445/330/H250 mm -Weight: 60 kg

Brake motor, electric motor, three-phase motor -Power: 2.2 kW -Speed: 945 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 44 -Brake: 380 V -Number: 1x available -Price: per piece -Dimensions: 500/270/H240 mm -Weight: 53 kg

Three-phase motor, electric motor -Power: 0.8kw -Speed: 680 rpm -Shaft: Ø 25 mm -Construction: B3 -Protection class: -Number: 1 piece available -Dimensions: 390/248/H280 mm -Weight: 33kg

This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

Electric motor, three-phase motor -Manufacturer: Perske, electric motor type NS80.10/8/2 -Power: 0.37/1.5 kW -Speed: 700/2900 rpm -Shaft: Ø 19 mm -V-belt pulley: Berges, symmetrical Ø 160 mm adjustable pulley see photo -Protection class: IP 54 -Design: B3 -Dimensions: 400/250/H200 mm -Weight: 40 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 945 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 415/283/H230 mm -Weight: 44 kg

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 445/340/H260 mm -Weight: 55 kg

Electric motor, three-phase motor -Motor is for a husband grinder -Electric motor: with 2 shaft outputs -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 580/340/H260 mm -Weight: 75 kg

This HAITIAN ZE2300 was manufactured in 2019. It features a clamping force of 2300 kN, a platen opening stroke of 1150 mm, and a screw diameter of 55 mm. Equipped with a robot and Euromap 67 interface, it remains in excellent condition and is still in production. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN ZE2300 machine we have for sale. Contact us for more information.

Three-phase motor, electric motor -Condition: unused -Manufacturer: Aerzen Weg, Electric motor type: 200L-02 -Power: 30 kW -Speed: 2970 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Protection rating: IP55 -Number: 3x motors available -Price: per piece -Dimensions: 770/400/H510 mm -Weight: 226 kg/unit

Slip ring motor, slip ring rotor, three-phase motor, electric motor -Power: 30 kW -Speed: 720 rpm -Conical shaft: 70 to 59 mm -Length: 122 mm -Design: B3 -Protection rating: - -Dimensions: 1120/580/H530 mm -Weight: 558 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2965 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: - -Dimensions: 810/550/H440 mm -Weight: 340 kg

This HAITIAN ZE1900 was manufactured in 2019. It features a clamping force of 1900 kN, a maximum injection volume of 412 cm³, and a screw diameter of 50 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the HAITIAN ZE1900 machine we have for sale. Contact us for more information about this machine.

Three-phase motor, electric motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP44 -Number: 1x available -Price: per piece -Dimensions: 520/300/H245 mm -Weight: 48 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2880 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 520/330/H275 mm -Weight: 47 kg

electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 -Price: per piece -Quantity: 1 available -Dimensions: 440/265/H360 mm -Weight: 61 kg

This 5s Krauss Maffei 160-750 EX was manufactured in 2015. It features a clamping force of 1600 kN and a fully electric drive system, ensuring efficient operation. The machine has a screw diameter of 45 mm and a calculated shot volume of 302 cm³, making it suitable for various injection molding applications. Consider the opportunity to buy this Krauss Maffei 160-750 EX electrical injection moulding machine. Contact us for further details.

Three-phase motor with 2 speeds, electric motor -Power: 4/4 kW -Voltage/frequency: 220/380 V 50 Hz -Speed: 1460/2960 rpm -Voltage/frequency/power: 240/460 V 60 Hz 4.8 kW -Speed: 1760/3550 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP44 -Dimensions: 490/300/H330 mm -Weight: 71 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2880 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 3x available -Dimensions: 430/260/H310 mm -Weight: 56.2 kg