superior electric used for sale

This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.

Generator, power 100 kW, Ricardo brand 4-cylinder water-cooled engine, equipped with consumption reduction system, automatic electric ignition, digital control panel, electronic voltage control, outputs 230/380 volt Never used 0 hours, the power indicated refers to the peak power. Overall dimensions: 2450 x 1200 x 1500 mm Weight: 1300 kg Auction-ID: A7-44803-16

Electric motor, luminous flux motor -Power: 1.1 kW -Speed: 2820 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 340/160/H220 mm -Weight: 15 kg

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1350 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP44/55 -Dimensions: 360/160/H215 mm -Weight: 15 kg

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-44803-180

Electric motor, three-phase motor -Power: 0.125 kW -Speed: 900 rpm -Shaft: Ø 14 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 5x available -Dimensions: 230/190/H160 mm -Weight: 10 kg

This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.

Automatic electric strapping machine, mod v2 with 14.4 volt battery, never used Overall dimensions: 300 x 200 x 200 mm Weight: 5 kg Auction-ID: A7-44803-425

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2900 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Number: 2x available -Price: per piece -Dimensions: 445/320/H260 mm -Weight: 69 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 475/300/H380 mm -Weight: 69 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1430 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 445/260/H310 mm -Weight: 46 kg

This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine.

Electric pallet truck, equipped with lithium battery and quick charger, 24 volt batteries, with electric traction and lifting. Never used 0 hours, in its original packaging Overall dimensions: 1400 x 800 x 800 mm Weight: 250 kg Auction-ID: A7-44803-229

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 8 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 33x available -Dimensions: 265/205/H145 mm -Weight: 6 kg

Electric motor, three-phase motor -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 16 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 260/150/H205 mm -Weight: 9 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1405 rpm -Shaft: Ø 28 mm -Design: B3 -with extra cooling fan -Protection class: IP 55 -Dimensions: 410/260/H195mm -Weight: 20kg

This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information.

COMPAL POWER VG-R50 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 50 kW-62, 5kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 1100 kg Auction-ID: A7-44803-91

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 490/260/H310 mm -Weight: 52 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2860 rpm -Shaft: Ø 32 mm -Design: B5 -Protection class: IP 44 -Quantity: 1x electric motor available -Price: per piece -Dimensions: 450/250/H310 mm -Weight: 57 kg

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, 4-cylinder water-cooled Ricardo engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-44803-12

Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Hollow shaft: Ø 40 mm -Construction: B3 -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 420/290/H225 mm -Weight: 50 kg

This FANUC Roboshot alpha-i30B was manufactured in 2023. It features a clamping force of 300 KN, a screw diameter of 22 mm, and a maximum injection speed of 600 mm/s. Ideal for precision in electrical injection moulding, it offers a compact platen size of 440x420 mm and efficient energy consumption. If you are looking to get high-quality moulding capabilities, consider the FANUC Roboshot alpha-i30B machine we have for sale. Contact us for more information.

COMPAL POWER VG-R110 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control Outputs 220/380 Volt, power 10 kW-11 kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1000 x 650 x 800 mm Weight: 200 kg Auction-ID: A7-44803-96

This FANUC Roboshot S100iA was manufactured in 2014. It features a closing force of 100 tons and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-44803-233

Electric motor, three-phase motor -Power: 5 kW -Speed: 2880 rpm -Shaft: Ø 24 mm -Construction: B5 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 390/310/H225 mm -Weight: 44 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2880 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 375/300/H250 mm -Weight: 41 kg

This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.

Automatic electric strapping machine, mod v2 with 14.4 volt battery, never used Overall dimensions: 300 x 200 x 200 mm Weight: 5 kg Auction-ID: A7-44803-424

three-phase motor, electric motor -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 mm -Design: B5 -Protection class: IP 55 -Dimensions: 385/250/H300 mm -Weight: 25 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/330/H270 mm -Weight: 80 kg

Electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: - -Dimensions: 475/285/H330 mm -Weight: 69 kg

This FANUC Roboshot S100iA was manufactured in 2021. It features a 100 ton clamping force, ideal for precision electrical injection moulding. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

COMPAL POWER VG-R110 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control Outputs 220/380 Volt, power 10 kW-11 kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1000 x 650 x 800 mm Weight: 200 kg Auction-ID: A7-44803-103

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1480 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: - -Dimensions: 470/285/H350 mm -Weight: 69 kg

Three-phase motor, electric motor -Power: 0.8 kW -Speed: 940 rpm -Shaft: Ø 22 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 400/195/H240 mm -Weight: 22 kg

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 2.7/4.0 kW -Speed: 950/1440 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: -Dimensions: 480/320/H270 mm -Weight: 78 kg

This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine.

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 430/315/H240 mm -Weight: 44 kg

Three-phase motor with 2 speeds, electric motor -Power: 1.7/6.4 kW -Speed: 720/1460 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 44 -Dimensions: 490/315/H260 mm -Weight: 58 kg

Electric motor, three-phase motor with 2 speeds -Power: 1.6/5.5 kW -Speed: 1445/2880 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: -pole changing -Number: 1x available -Price: per piece -Dimensions: 410/350/H300 mm -Weight: 48 kg

Electric motor, three-phase motor with 3 speeds -Power: 4.4/8-6 kW -Speed: 725/1440/970 rpm -pole changing -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 650/440/H320 mm -Weight: 140 kg

This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-44803-174

Electric motor, three-phase motor -Power: 4.0 kW -Speed: 2880 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: -Number: 1x available -Price: per piece -Dimensions: 390/300/H230 mm -Weight: 43 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: -Number: 1x available -Price: per piece -Dimensions: 410/360/H285 mm -Weight: 49 kg

This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine.