superior electric used for sale

indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Handover: in the current condition as viewed -Condition: Operation is missing a switching element (can be installed for an additional charge) -Engines: tested and OK -Nominal load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Electric motor, three-phase motor -Electric motor: for gear motor -Type gear motor: FA60MT80N80N1/HF -Speed: 750 rpm -Shaft: Ø 12x20 mm -Design: B5 -Protection class: IP 55 -Dimensions: 355/213/H160mm -Weight: 15kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1380 rpm -Shaft diameter: 24 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 300/240/H180 mm -Weight: 19.8 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 27 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 367/265/H250 mm -Weight: 27 kg

weight max. in kg: 3500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V/280AH Li-ion weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,94 x 1,23 x 2,25 m New EP EFL 352 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 3500 kg Headroom of 2.25 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 870 rpm -Shaft diameter: 11 mm -Construction: B3 -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 180/134/H160 mm -Weight: 6 kg

Three-phase motor, electric motor -Power: 1.6 kW -Speed: 930 rpm -Shaft: Ø 22x70 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 2x available -Dimensions: 400/320/H260 mm -Weight each: 47 kg

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1420 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 300/235/H181 mm -Weight: 16 kg

table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min max. torque on the faceplate: 900 Nm welding current: 500 Ampere total power requirement: 0,75 + 0,75 kW weight of the machine ca.: 0,8 t Welding rotary tilting table - Remote control - 2 x welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 1.1/1.6 kW -Speed: 1400/2800 rpm -Shaft: Ø 25 mm -Construction: B3 -Protection class: - -Dimensions: 350/290/H260 mm -Weight: 42 kg

electric motor -Power: 0.25 kW -Speed: 2800 rpm -Brake: 220 V -Shaft diameter: 14 mm -Design: B14 -Protection class: IP 44 -Dimensions: 275/140/H176 mm -Weight: 9 kg

Electric motor, three-phase motor -Power: 0.52 kW -Speed: 2785 rpm -Shaft diameter: 14 mm -Construction: B3 -Protection class: IP 56 -Dimensions: 205/125/H175 mm -Weight: 8 kg

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 4500 mm high: 2020 mm weight of the machine ca.: 0,92 t dimensions: 1,72 x 0,8 x 2,02 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gear, electric motor, DC motor, traction motor, drive motor -Voltage: 48 volts -Power: 5kW -Speed: 1900 rpm -Drive motor for: lifting work platforms from GSL (German Standard Lift) -Pump: Lamborghini MLPS/BCX/208/F -Number: 3x available -Price per piece -Dimensions: 210/H470 mm -Weight: 42kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 12 mm -Construction: B5 -Flange: Ø 120 -Protection class: IP 54 -Dimensions: 290/192/H146 mm -Weight: 10 kg

Electric motor, three-phase motor -Power: 0.15/0.22 kW -Speed: 690/1400 rpm -Shaft: Ø 18 mm -Wave length: 50 mm -Construction: B3 -Protection class: - -Dimensions: 295/225/H180 mm -Weight: 17 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 1410 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 355/265/H250 mm -Weight: 28 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1655 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 275/195/H156 mm -Weight: 9 kg

E-chain hoist, electric hoist, crane STAHL type R 12Fabr. No. 3437532 Year of construction 1979Load capacity: 1250 kgHook travel: 2.4 metresLifting speed for one load train: 8 m/min. Fine lifting speed for a load train: 2 m/min. Lifting speed for two load trains: 4 m/min. Fine lifting speed for two load trains: 1 m/min.2 load trains = 1250 kgEngine power: 1.25 / 0.25 kWNetz connection 380 volts, 50 Hz- without chain bag- trolley carriage for KBK 2 - double girder crane bridge, overhead cranegood condition; used

electric motor, three-phase motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 14 mm -Design: 14 -Protection class: IP 54 -Quantity: 1 available -Dimensions: 245/163/H155 mm -Weight: 5 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 2780 rpm -Shaft: Ø 11 mm -Construction: B14 -Flange: Ø 90 mm -Protection class: - -Dimensions: 235/116/H155 mm -Weight: 7 kg

E-chain hoist, electric hoist, crane GIS type PK 250 / FFabr. No: 252 243 Year of construction 1988Load capacity 2500 kgHook travel 4 metersMain lifting speed 4.1 m/min. Fine lifting speed 0.9 m/min.- 2 load trainsGood condition; used

Electric motor, three-phase motor -Electric motor for hydraulic pump and comes from a hydraulic press (ID18710) -Manufacturer: Schoen type UTE/B -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Anzahl: 1x available -Dimensions: 445/360/H300 mm -Weight: 62 kg

Linear drive, linear gear, lifting gear, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, servomotor, servo cylinder -Piston: Ø 32 mm -Stroke: 100 mm -Gliding guide -Stepper motor -Spindle pitch: 8 mm -Brake -Robotics cable -LECP6/LECA6, PNP, version with cutting data input -DIN- rail mounting -Dimensions: 630/320/H460 mm -Weight: 56 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1340 rpm -Shaft: Ø 11 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 180/120/H160 mm -Weight: 6 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm -Shaft: Ø 14 mm -Flange: Ø 200 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 265/200/H220 mm -Weight: 16 kg

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: 22 mm -Design: B5 -Protection class: - -Price: per piece -Quantity: 1 available -Dimensions: 320/200/H225 mm -Weight: 17 kg

E-chain hoist, electric hoist, crane GIS/SWF type 150 / FFabr. No: 15739 Year of construction 1970Load capacity 1500 kgHook travel 4.5 metersMain lifting speed 4 m/min. Fine lifting speed 1 m/min.- Electric carriage with a speed for double T-beams- 2 load trainsGood condition; used

three-phase motor, electric motor -Power: 4 kW -Speed: 2900 rpm -Shaft: Ø 28 x 60 mm -Recess: Ø180 mm -Bolt circle: Ø215 mm -Hole spacing lengthwise: 140 mm -Hole spacing across: 190 mm -Design: B5 -Protection class: IP 44 -Dimensions: 380/300/H250 mm -Weight: 33 kg

Gear motor, electric motor, electric gear motor -Electric motor: for gearbox -for gear motor type: CB59-80K/4DBRF -Speed: 1380 rpm -Power: 0.55 kW -Worm shaft: Ø 20 mm -Construction: B5 -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 345/210/H160 mm -Weight: 13 kg

Electric motor, three-phase motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 380/295/H250 mm -Weight: 38 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1350 rpm -Shaft diameter: 12 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 260/196/H145 mm -Weight: 7 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 920 rpm -Shaft: Ø 14 mm -Design: B3 -Protection class: IP 33 -Dimensions: 230/177/H138 mm -Weight: 7 kg

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 44 -with brake -Dimensions: 375/200/H215 mm -Weight: 26 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1400 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: -Number: 2 motors available -Price: per piece -Dimensions: 380/310/H250 mm -Weight: 38 kg

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 14 mm -Design: B5 -Protection class: IP 44 -Dimensions: 295/205/H160 mm -Weight: 11 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 2765 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 210/124/H170 mm -Weight: 5 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1340 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 185/131/H175 mm -Weight: 6 kg

electric motor, three-phase motor -Power: 1.4 kW -Speed: 2850 rpm -Shaft diameter: 18/22 mm -Design: B5 -Protection class: IP 56 -Weight: 15 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 940 rpm -Shaft: Ø 35 mm -Design: B3 -Protection rating: - -Dimensions: 440/350/H300 mm -Weight: 60 kg

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1395 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 44 -Quantity: 3 available -Price: per piece -Dimensions: 280/199/H205 mm -Weight: 15 kg

Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1330 rpm -Shaft: Ø 9 mm -Design: B3 -Protection class: IP 44 -Dimensions: 190/147/H110 mm -Weight: 4 kg

E-chain hoist, electric hoist, crane YALE type 5-10/10-5series. No. 8526 Year of construction 1979Lifting capacity: 1000 kgHook travel: 3 metersLifting speed: 5 m/min. Fine lifting speed: 1.3 m/min.2 load trains = 1000 kgPower supply: 380 volts, 50 Hz.- Suspension eye on the top of the crane- Control bottle with button for main lift and fine lifting material condition; used

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 3.5-6 kW -Speed: 930-875 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 610/270/H340 mm -Weight: 91 kg

electric motor, three-phase motor -Power: 0.12 kW -Speed: 680 rpm -Shaft diameter: 14 mm -Design: B3 -Protection class: IP 33 -Price: per piece -Quantity: 6 available -Dimensions: 235/190/H135 mm -Weight: 7.7 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft diameter: 14 mm -Construction: B14G -Protection class: IP 54 -Number: 11x motors available -Price: per piece -Dimensions: 240/160/H185 mm -Weight: 6.2 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Brake: 220 V / 4 Nm -Construction: B3 -Protection class: IP 54 -Dimensions: 235/125/H170 mm -Weight: 4.9 kg

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DIwith Dematik BUS control via crane system controlFabr. No.61456646 Year of construction 2003Lifting capacity: 200 kgHook travel: 4.0 metersMain lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm1 Load train = 200 kg- with control logic DKES2/5 500V- without crane operation- Dematik BUS control via crane system control- without roller chassisMains connection: 400 Volt, 50 HzNominal power: 750 WNenncurrent: 2.4