superior electric used for sale

HADEF electric chain hoist Payload 1,500 kg Lifting speed 1/4m/min with electric chassis Travel speed 4 / 16 m / min Chains 7/8 x 23 mm Complete electrics and traction motors for crane bridge available - Compact design -

Three-phase motor with 2 speeds, electric motor -Power: 4/4 kW -Voltage/frequency: 220/380 V 50 Hz -Speed: 1460/2960 rpm -Voltage/frequency/power: 240/460 V 60 Hz 4.8 kW -Speed: 1760/3550 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP44 -Dimensions: 490/300/H330 mm -Weight: 71 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Shaft: 38 mm -Design: B5 -Protection rating: IP54 -Quantity: 1 available -Dimensions: 510/290/H330 mm -Weight: 86 kg

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Quantity: 2 available -Price: per piece -Dimensions: 320/198/H220 mm -Weight: 12 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP 44 -Dimensions: 380/236/H270 mm -Weight: 38 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 2840 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 215/175/H150 mm -Weight: 4.2 kg

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1390 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 220/125/H165 mm -Weight: 4.3 kg

Snack bar Kitchenette Palux with induction and Bainmarie 280x80x86 cm, 2x plug 32 A, 2x double hotplate – induction plate a 10 kW, 2x 1/1 GN Bainmarie a ' 6 kW, storage space, worktop, year of construction 2018, original price 23112,00 €, the total width can be shortened to your desired width by shortening the middle worktop

Sewing machine motor, lighting current motor, electric motor -Manufacturer: Pfaff, sewing machine motor type PCD 321 -Power: 0.245 kW -Speed: 2800 rpm -Voltage: 220/380 V 50 Hz -Shaft: conical Ø 11/15 x 21 mm -Sewing light connection: 12 V 15 W -Dimensions: 340/190/H320 mm -Weight: 19 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 225/196/H160 mm -Weight: 7.7 kg

Electric motor, three-phase motor -Power: 2.2 kW -Speed: 705 rpm -Shaft: Ø 32 mm -Design: B3 -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: 440/225/H290mm -Weight: 44 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 420/320/H230 mm -Weight: 42 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 2895 rpm -Shaft: Ø 35 x 90 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 450/300/H250 mm -Weight: 42 kg

three-phase motor, electric motor -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

brake motor, electric motor, three-phase motor -Power: 0.25 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Design: B14 -Protection class: IP 54 -Quantity: 2 available -Price: per piece -Dimensions: 275/122/H185 mm -Weight: 6.6 kg

electric motor, three-phase motor -Manufacturer: Schorch, electric motor type KA3280M-BB024-050 -Power: 1.1 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 54 -Number: 25x available -Price: per piece -Dimensions: 275/156/H205 mm -Weight: 10 kg

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Three-phase motor, electric motor -Power: 3.6 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 385/295/H250 mm -Weight: 37 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 10 mm -Construction: B5 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 240/160/H200 mm -Weight: 6.5 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 685 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 320/175/H220 mm -Weight: 17 kg

3 Pieces Container Units with Diesel Engine Engine Type: Perkins 4016-61 TRG2 Year: 2023 Hours: 2 Power: 2000 kVA Cooling: Water, Radiator Speed: 1500 1/min Tank: approx. 2000 litres Generator: Stamford HVSI804R Voltage: 10 kV, 50 Hz Excellent condition, like new! Was used as an emergency power system. Subject to prior sale - errors possible! Internal reference number: E-1004-97

Three-phase motor, electric motor -Power: 1.35 kW -Speed: 1425 rpm -Shaft: Ø 24 mm -Construction: B5 -Protection class: IP54 -Number: 2x available -Price: per piece -Dimensions: 420/200/H250 mm -Weight: 19.7 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 685 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 375/270/H250 mm -Weight: 41 kg

Electric motor, three-phase motor -Power: 0.75 KW -Speed: 920 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: Ex -Dimensions: 295/175/H190 mm -Weight: 12.7 kg

Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 300/190/H145 mm -Weight: 8.7 kg

E-chain hoist, electric hoist, crane GIS type 150 / FFabr. No: 1502802 Year of construction 1981Load capacity 1500 kgHook travel 4 metersMain lifting speed 4 m/min. Fine lifting speed 1 m/min.- Electric carriage with a speed for double T-beams- 2 load trainsGood condition; used

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg

Three-phase motor with 2 speeds, electric motor -Handover in its current condition as inspected -Foot: damaged, see photo -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Design: B3 -Protection class: IP 54 -pole-reversible -Dimensions: 710/350/H450 mm -Weight: 179 kg

Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Foot damaged, see picture -Dimensions: 300/190/H145 mm -Weight: 8.7 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 940 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 280/230/H200 mm -Weight: 14 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 365/280/H250 mm -Weight: 27 kg

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63314301 Year of construction: 1992Load capacity 1000 kgHook travel 4.1 metersDistance suspension to load hook 480 mmMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length of operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz.2 load trains = 1000 kg- emergency stopWeight 43 kggood condition; used

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 920 rpm -Shaft: Ø 24 x 50 mm -Construction: B34 -Flange: Ø 160 mm -Number: 3 motors available -Price: per piece -Dimensions: 350/246/H205 mm -Weight: 31 kg

Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1360 rpm -Shaft: Ø 10 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 3x available -Dimensions: 235/142/H180 mm -Weight: 4 kg

Three-phase motor, electric motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 10 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 1x available -Dimensions: 235/142/H180 mm -Weight: 4 kg

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. ED 24ST Series No. 00005266 Year of construction 2008Load capacity 240 kgHook travel 2.7 metersDistance suspension to load hook 950 mmLifting speed Lifting speed: 3 to 12.9 m/min. Mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety, stroke limit switch- emergency stopWeight 18.5 kgvery good condition; used

Electric motor, three-phase motor -Power: 0.25 kW -Speed: 2755 rpm -Shaft: Ø 11 x 20 mm -Construction: B14 -Flange: Ø 90 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 230/118/H165 mm -Weight: 5 kg

electric motor -Power: 0.37 kW -Speed: 1500 rpm -Shaft diameter: 14 mm -Design: B3 - Protection class: - -Dimensions: 240/186/H175 mm -Weight: 12 kg

electric motor, three-phase motor -Power: 0.12 kW -Speed: 1360 rpm -Shaft diameter: 11 mm -Design: B3 -Protection class: IP 44 -Quantity: 1 available -Price: per piece -Dimensions: 215/112/H150 mm -Weight: 5.6 kg

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. EDC 24SD Series No. 032190 Year of construction 2017Load capacity 240 kgHook travel 2 metersDistance to suspension to load hook 850 mmLifting speed 3 to 12.9 m/min. mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety- stroke limit switch- emergency stopweight 18 kgvery good condition; used

Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Design: B5 -Hole circle: Ø 213 mm -Recess: Ø 180 mm -Flange: Ø 250 mm -Protection rating: IP 44 -Dimensions: 487/325/H252 mm -Weight: 60kg

Electric motor, three-phase motor -Voltage: 240/415 V -Power: 0.12 kW -Speed: 680 rpm -Shaft: Ø 15 x 85 mm -Construction: B14 -Protection class: IP 33 -Price: per piece -Number: 5x available -Dimensions: 295/185/H140 mm -Weight: 7 kg

three-phase motor, electric motor -Power: 1.5 kW -Speed: 900 rpm -Shaft: Ø 28 x 60 mm -Design: B14 -Flange: Ø 160 mm -Protection class: IP 54 -Dimensions: 330/255/H190 mm -Weight: 25 kg

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 4500 mm high: 2020 mm weight of the machine ca.: 0,92 t dimensions: 1,72 x 0,8 x 2,02 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1500 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Flange: Ø 105 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 245/187/H140 mm -Weight: 6.5 kg

Electric motor, three-phase motor -Power: 0.22/0.4 kW -Speed: l 695/1350 rpm -Shaft diameter: 18 mm -Construction: B3 -Protection class: - -Dimensions: 275/175/H215 mm -Weight: 15 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft diameter: 19 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 275/190/H155 mm -Weight: 12 kg

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5000 mm high: 2185 mm weight of the machine ca.: 0,98 t dimensions: 1,72 x 0,8 x 2,2 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg