super used for sale

single head working direction: left-right capacity / hour ca.: 2300 amount of capping heads: 1 Dim. L x W x H [m]: en More then 300 machines new and second hand on our seema .de

with vacuum construction. For 3 bottle types. Single head. More then 300 machines new and second hand on our seema .de

capacity 90 degrees: round: 270 mm capacity 90 degrees: square: 260 mm : 350 x 240 band speed: 36/72 m/min saw band length: 2925 x 27 x 0,9 mm total power requirement: 1,9 kW weight of the machine ca.: 0,6 kg Dimensions (LxWxH): 1,9 x 1,1 x 1,75 0 Band saw including micro spray device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 BENNINGER sectional warping machine type SUPERTRONIC, working width 220 cm, year 1989, machine supplied with 2 trolley creels type BEN-CREEL from the year 1999, each 640 spindles (8 stores x 40 columns x 2 sides), vertical gauge 240 mm, horizontal gauge 240 mm

Manufacturer: Cefla, Type: UVM Superfokus, Year: 2014, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-60, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: ca.16, Lampenlänge mm: 1450, Gesamtlänge UV Modul mm: 3000, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Position of lamps: gerade, Conveyor: Rolle, Drive power kW: 0,75, Through running hight mm: 90, Feedin speed m/min: 3-5, Year :2014

: 3 capacity in kVA: 44 kVA serial number: 34406060011 volt: 400 Y V Number of working hours: 04786 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type Of Laminator: Solvent and Solventless // Working Width: 1315 mm

SCM Superset XL Four-Sided Planer + Feeder Working width 230mm Working height 140mm Number of spindles: 5 Spindle system: Bottom 5.5kw Rights 5.5kw Left 5.5kw Mount 7.5kw Universal 360° 7.5kw Drive on cardan shafts Variator speed adjustable 6-25m/min Pneumatic clamps SACOT feeder for short parts Spindles with brakes A set of planing heads Complete technical documentation CE Certified

SCM Superset XL four-sided planer Working width 230mm Working height 130mm Number of spindles: 7 Spindle system Bottom 9kw Rights 9kw Left 9kw Mountain 9kw Bottom 9kw Rights 7.2kw Left 7.2kw Spindles adjustable in two planes Spindle diameter 40mm Feed speed adjustable on the inverter Drive on cardan shafts Pneumatic clamps

Stick electrodes 5.0 x 450 -Type: Supercito E51 55 B 10 -Price: per package -Number: 13 packages available -Weight per package: 5.5 kg

turning diameter over bed: 800 mm turning length: 2000 mm centre height: 400 mm turning speeds: 1450 U/min weight: 7600 kg Power: 15 KW required space: 5,66 x 1,16 x 1,46 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 255 mm saw band length: 2765 x 27 x 0,9 mm table height: 950 mm : 18-110 m/min : 255 mm capacity 90 degrees: square: 240 mm capacity 90 degrees: flat: 300 x 180 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: square: 190 mm capacity 45 degrees: flat: 200 x 160 mm capacity 60 degrees: round: 135 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 130 x 100 mm capacity 45 degrees: round: rechts 180 mm capacity 45 degrees: square: rechts 160 mm capacity 45 degrees: flat: rechts 180 x 100 mm : 1,5/1,8 kW : 350 kg : 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system  ...

Optimizer Salvador from 2018. Efficient machine, Optimus B87 version, material length 4000 mm

The ejector is to be replaced. The rest of the machine works fine injection system: Screw diameter - 60 mm Injection volume - 735 cm3 Shot weight - 640 g Injection pressure - 2100 kgf/cm3 Injection speed - 332 cm3/sec Injection speed - 118 mm/sec Screw pitch - 260 mm Screw speed - 175 rpm clamping unit: Clamping force - 260 tons Opening stroke - 850 mm Mold height - 260 mm Max daylight - 1100 mm The distance between the tie rod - 560x560 mm Ejector force - 7.7 tons Throwing stork - 180 mm Clamping speed - 375 mm/sec Opening speed - 500 mm/sec Power system: Pump motor - 45 kW Thermal power - 22.3 kW System pressure - 175 kgf/cm2 Capacity - 700 liters General: Machine size - 6.3x1.7x2.3 m Machine weight - 12.1 tons

Round and long caster SUPERBA Model: SU Compact Combined circular and long knitting in one machine long effective channel 2500 mm max. bread length 500 mm Weight range 500 to 2000g Machinery on the move Capacity 800 - 2000 pieces/h with extra flour Connection 400V, 3 kW, 16A-CEE plug Dimensions: 2000 x 960 x 3500 mm, HxWxD Used machine overhauled 6 months warranty Many more bakery machines in stock!

: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 € : 193.34 € : 48 mm : 570 mm : 410 mm : 1000 mm : 110 kg : 6 cm³ : 48 x 3,5 mm : 11/2 x 3.68 mm : 54 x 1,5 mm : 50 x 4 mm : 48 x 2 mm : 48 x 2 mm : 60 x 3 mm : 64 x 2 mm : 64 x 2 mm : 60 x 2 mm : 50 x 4 mm : 32 mm : 45 x 16 stehend, 45 x 25 mm : 300 mm : 10 mm : 10 mm : 2/3 U/min : 1,5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual alternatively also available as folowing model: SB 48M (single phase, 2 r/min)EURO: 8.820,-- Model with TCPlus control on request machine-kit with tools: Art.Nr. maschine tube radius price SB 48M K2D SB 48M Gas inch 2 x Ø 10.640,-- SB 48T K2D SB 48T Gas inch 2 x Ø 11.160,-- tools: Ø 1/2", (21,3 mm), R46 Ø 3/4", (26,9 mm), R56 Ø  ...

CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x ...

cutting diameter: 230 mm band length: 375 mm capacity 90 degrees: round: 230 mm total power requirement: 1,5 kW weight of the machine ca.: 0,28 t dimensions: 1,2 x 1,25 x 1,0 m Automatic hacksaw - Coolant system - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 mm

Specifications: Drive power 1.8 / 2.2 kW 2 speeds Saw blade size 350 x 35 x 2 mm Cutting area round 200 mm flat approx. 190 x 130 mm

-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Key data: 356 mm, 178 mm

technically tested and maintained, with signs of use

General SKU266U440 LocationBarneveld MakeSharples centrifuges LTD. TypeMV8816.3.38Y.1JY No.73.110340 Year of construction1973 Main Features MaterialMild steel/Stainless steel Motor1.5 KW Specified Features - Separator Separatorcheck Motor1,5 kW,220-250/380-420 volt, 2800 rpm, Max. rotor speed15000rpm InletDia:50 mm Liquid outletDia:50 mm Solids outletDia:30 mm MaterialSilicon steel 1.5023, Stainless steel 1.4306 (304L) Information Mounted on mild steel framecheck Total height1,6 m Weight400 kg Floorspace1,0x0,5 m Extra SpecificationsMax bowl speed 15.000 rpm, inside diameter 105mm With coil jacket SeparatorsSharplesCentrifuges > SeparatorsBrand > Sharples What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKU286U528 LocationBarneveld MakeIka-labortechnik TypeSuper dispax SD41 Year of constructionUnknown Main Features MaterialStainless steel Motor1.5 KW Rotor30 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 30x15mm InletDia. 15mm OutletDia. 15mm Number of stages:1 With mechanical sealcheck Motor1,5 kW, 220/380Volt, 2840rpm With frequency controllercheck Rotor speed4000-13000 rpm With vesselcheck Capacity±8Ltr. Vessel sizesDia200x300mm With jacketcheck MaterialStainless steel 1.4301 (304) Information Mounted on framecheck With switchcheck With switchgearcheck(as is) Weight80 kg Floorspace0,49x0,40 m Total height0,75 m Extra SpecificationsWith Janke &: Kunkel speed control, type DS2SO, 1500 watt, 220-240 voltInline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth ...

General SKU294T680 LocationBarneveld MakeDraiss TypePM SUPERTEX 30 No.56367 Year of construction2001 Pressure Working pressure3 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand millcheck Capacity31 Ltr. Housing dimensions dia. 240x640 mm Inletdia. 24 mm Outletdia. 24 mm With mechanical sealcheck With jacket7 Ltr. Max. temperature70 °C Motor22 kW 400 Volt With variable speed drivecheck Information Mounted on framecheck With switchas is Weight1250 kg Floorspace1,6x0,9 m Total height2 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, Th ...

General SKU397M492 LocationBarneveld MakeVMI Rayneri TypeSupertest Air No.142652 Year of construction2006 Main Features MaterialStainless steel Length300 mm Specified Features - Stirrer Propellor stirrercheck Shaft length300mm Sizes stirring headdia. 70mm Pneumatic motorcheck With variable speed drivecheck Mounted on supportcheck Adjustable heightcheck MaterialStainless steel Information Mounted on framecheck With switchcheck With switchgearcheck Floorspace0,6x0,5 M Total height1,0 M Weight35 KGStirrersVMI RayneriMixers > StirrersBrand > VMI Rayneri What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Complete with Lns Quick Load Servo Iii bar loader Max Distance between Tips mm. 970 / Min. mm. 210 Max Turning Diameter mm. 190 Main Spindle: Spindle Nose (Asa Attachment) Asa A2-6 Spindle speed (Min./max.) Rpm/min. 4,500 Spindle Motor Power Kw Kw. 11/15 Bar passage mm. 65 Counter spindle Spindle Nose (Asa Attachment) Asa A2-5 Spindle speed (Min./max. )g./min. 5,000 Spindle Motor Power Kwkw. 11/7.5 Bar passage 51 mm Number of upper turrets 2 Number of Lower Turrets 1 X Axis Travel mm. 167.5 Z Axis Stroke mm. 250 Y Axis Travel mm. 102 X Axis Travel 2mm. 167.5 Z Axis travel 2mm. 250 Y Axis travel 2mm. 102 X Axis Travel 3mm. 167.5 Z Axis travel 3mm. 685 Fanuc 16i-tb control Dimensions W D Hmm.3.930 X 2.270 X 2.110 2 High Pressure Pumps Paper Filter Conveyor Finished Pieces External mat Weight 12,000 kg Year 2004

Salvador Superpush 200 Optimizer. Year: 2018 Condition bardo good, works only one shift. Regularly serviced. Possibility of loading and delivery.

Complete Packaging in film, with continuous side sealing & operation consisting in: 1) Automatic product transport into the wrapping process by finger chain conveyor L=10 m, in double row function 2) Two-sided product alignment unit 3) Driven conveyor belt triangle arranged 4) Max. production 10.000 c/h 5) RES controller for use of CPP film 6) Hole punch device 7) Print register control 8) Equipment for tight packaging 9) Remote control 10) Corner impress station in double function 11) Film folding device FF 1000-IN 12) Sealing equipment for header and euro-hole 13) Modem (connection with Hugo-Beck) 14) Rejecting device PA 15 15) Unit for formation of single bag with header with reinforcement strip 16) Unit for formation double bag 17) Tunnel SLB5035/25

VITAP drilling machine model SUPERFAST 27: – 27-spindle head with quick coupling – aluminium guides with electronic digital indicator – drilling at 0° - 45° - 90°, from lower vertical to horizontal – pneumatic movement of the drilling head – 6-position drilling depth revolver – 4 pneumatic clamps to hold the pieces Year 2018, CE standard machine

Single capping head; Working direction: left-right; Without cork orientator. More then 300 machines new and second hand on our seema .de

Key data: 178 mm, 485 mm, 100 mm

Turning length: 485 mm Rotation diameter: 178 mm above bed / 100 mm over cross slide Spindle Passage: 15.5 mm Spindle speeds: 25 - 2,150 rpm. Tool Container: Tripan Container Equipped with: - Rohm 3-jaw chuck with different jaws - Zahrade Set - Collet set -Operating instructions Country of origin: UK Machine LxWxH: 1180 x 700 x 1200 mm Machine weight: 170 kg

SCM moulder model SUPERSET 23 with 5 shafts: - Useful working dimensions 230x120mm - Alfasistel electronic control for 2-axis programming - Cardan drive and differentiated pneumatic pressure - Variable feed speed from 4 to 26 m/min - feed unit before the 1st shaft, with quick override - drive roller in the plane after the 5th shaft - 2500mm entrance level - Deck lubrication pump - shafts D=40mm at 6000rpm - Complete with 4 knife heads Trees: - Under HP -right - Left (right+left with single HP engine) - Above HP - Under HP

Key data: 560 mm, 410 mm, 450 mm

Travel X-axis 560 mm Y-axis 410 mm Z-axis 450 mm Clamping table Table clamping surface 700x420 mm Max. table load 300 kgs. Head Spindle speed 15000 rpm Spindle holder SK 40 Spindle drive 5.5 kW Feed Feed X/Y/Z axis 1-10000 mm/min Rapid traverse X/Y/Z axis 36/36/24 m/min Tool changer Number of tools 20 Max. tool diameter 100 mm, 200 mm with free adjacent space Max. tool length Control Fanuc 18-M Coolant Coolant tank 100 lt. Accessories Rotary table, positioning in 2 axes Note The shooting tools, tool holders and cutting tools shown in the pictures are not included

Key data: 560 mm, 410 mm, 450 mm

Travel X-axis 560 mm Y-axis 410 mm Z-axis 450 mm Clamping table Table clamping surface 700x420 mm Max. table load 300 kgs. Head Spindle speed 27000 rpm, Spindle Robert Grenoud, Switzerland Spindle holder SK 40 Spindle drive 5.5 kW Feed Feed X/Y/Z axis 1-10000 mm/min Rapid traverse X/Y/Z axis 36/36/24 m/min Tool changer Number of tools 20 Max. tool diameter 100 mm, 200 mm with free adjacent space Control Fanuc 18-M Coolant tank capacity 100 lt. Accessories Round Swivel Table 5 Axes Note The shooting tools, tool holders and cutting tools shown in the pictures are not included

through-put width: 1000 mm working heigth: 800 mm air consumption: 250 - 1000 l/min Filter capacity: 8 m² air pressure: max 10 bar total power requirement: 0,55 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 2100 x 1200 x 1850 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the blasting m ...

boring stroke: 120 mm, boring diameter: 24 mm, turning speed range: 193 - 2280 rpm, table surface area l x w : 350x350 mm, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm

Description: Sheet thickness: max. 80 mm main motor: 3 kW, cutting length: 5,300 mm, cutting height: 2,200 mm, main saw blade: 200 mm, saw carriage speed forward: 12 / 24 m/min, total power approx: 4 kW, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,000 x 2,900 mm, weight approx.: 1,500 kg

Number of spindles: 6 St. Working width: 240 mm Working height: 120 mm Dimensions (L/W/H): 4900 x 1700 x 1700 mm weight of the machine ca.: 3500 kg Control: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts 14 axis control with touch screen - WINDOW VERSION Machine with 6 spindles Spindle speed 8,300 rpm Working width 240 mm, working height 120 mm Electronic horizontal and vertical positioning of the spindles Glazing bead cutting Touchscreen controls Detailed technical description, see adjacent PDF documents. Suction nozzle diameter: 1. Spindle down: 120mm 2nd spindle right: 120 mm 3. Left spindle: 120 mm 4. Spindle top: 150mm 5. Spindle top: 150mm 6. Spindle below: 120mm Option: workpiece return to the operator Images are from our archive of a machine of the same model. (Technical information according to the manufacturer - without guarantee!) The data for t ...

Description: Max. machinable height 120 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Operator shafts number 5 Min. machinable height 6 mm Maximum machinable height 120 mm Min. machinable length 620 mm Min. machinable width 25 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Forward feed wheels yes Operator units 5 OPERATOR UNITS 1 Cutting shaft : bottom shaft diameter : 40 mm shaft length : 250 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 2 Cutting shaft : Right shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 3 Cutting shaft : left shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm with positioning from NC : yes Motor power : 11 KW OPERATOR UNITS 4 Cutting shaft : top shaft diameter : 40 mm shaft ...

Description: Date of first registration: 22 April 1999 Top speed: 205 km/h Engine capacity: 748 cm³ Permissible total weight: 385 kg Power: K45/8250 kW at 1/min With vehicle registration document and vehicle license Vehicle is not registered Mileage: 22226 Color: red Approx. Onsite Dimension. (l x w x h): 2,200 x 900 x 1,200 mm, weight approx.: 200 kg

Description: Part number: 40064 Serial number: 826/98 Suction capacity: 420 L Effective delivery volume: 273 L Maximum pressure: 10 bar Boiler capacity: 47 L Cylinder: 2-V Speed: 2800 rpm Engine power: 1.5 kW For further technical data, see photographed rating plate Approx. Onsite Dimension. (l x w x h): 460 x 520 x 810 mm, weight approx.: 100 kg

Description: 2-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. Turning diameter over bed 250 mm Turning diameter over support 145 mm Turning length 550 mm Speed 50 - 2000 rpm Center height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 0.135 t Space requirement approx. 1.3 x 0.65 x 0.6 m Approx. Onsite Dimension. (l x w x h): 1,300 x 660 x 600 mm, weight approx.: 160 kg

Description: Table lathes with drilling and milling unit - 3-axis LCD digital display system - Longitudinal feed. - 3-jaw chuck 125 mm. - 4-way steel holder. - Chip tray, bulkhead - Hardened bed tracks. - Emergency stop switch - Lining protection drilling and milling unit incl. - Quick chuck 1-16mm - Tightening spindle for milling tools - Lining protection - Emergency stop switch - Tool box, instruction manual. Turning diameter over bed 250 mm Turning diameter over support 145 mm Turning length 550 mm Speed 50 - 2000 rpm Center height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Connection voltage 230 V Drilling capacity in steel 16 mm Projection 169 mm Quill stroke 50 mm Speed range - drilling 50 - 2250 rpm Spindle motor 0.5 kW Total power requirement 0.75 kW Machine weight approx. 0.175 t Space requirement approx. 1.3 x 0.65 x 1.3 Approx. Onsite Dimension. (l x w x h): 1,30 ...

Description: Automatic hacksaw - Coolant device - 2 speeds Cutting diameter 230 mm Saw blade length 375 mm Cutting range at 90 degrees: around 230 mm Total power requirement 1.5 kW Machine weight approx. 0.28 t Dimensions L x W x H 1.2 x 1.25 x 1.0 m Approx. Onsite Dimension. (l x w x h): 1,200 x 1,250 x 1,000 mm, weight approx.: 280 kg

Used nail box (loose nails) for pallet making machine; Tilting function for loose nails for separation into the nailing machine (feed) to the nail guns; pallet production; Functional, functional. Not cleaned, not refurbished. Dimensions: 580x810mm Total width: 760mm Total height: 710 mm Shipping by freight forwarder possible

automatic welding machine with welding tunnel - Kallfass 650 N - Bj1990 -incl. wiring diagrams

Description: Planer, 4-sided moulder serial number: AB/095522 size of workpiece width: 20-230mm thickness: 8-160mm feeding speed: 6-30 m/min infeed table length: 2.000 mm height adjustment infeed table: 10mm 1st lower horizontal planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 2nd vertical planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 3rd vertical planer shaft, diameter 40mm, motor power 5,5kw, 6.000 rpm 4th upper horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm 5th lower horizontal planer shaft, diameter 40mm, motor power 7,5kw, 6.000 rpm feeding motor power 3 kw, 380v, 50Hz, 71A  , serial number: AB/095522, feed: planer moulder m/min, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,100 x 1,700 mm, weight approx.: 3,100 kg

Description: • Telehandler • Serial number JCB5XB3JLJ2730446 • Spanish registration number: E 6600 BGY • Maximum load capacity 3500 kg • Maximum lifting height 9500 mm • Working hours according to the counter 6131 • JCB EcoMax engine: displacement 4399 cc, power 93 KW • CE Standards • IMPORTANT: • The buyer is responsible for everything related to the loading of this equipment • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 5,000 x 2,300 x 2,490 mm, weight approx.: 8,400 kg

Description: • Telehandler • Serial number JCB5XB3JVJ2729603 • Spanish registration number: E 2197 BGY • Maximum load capacity 3500 kg • Maximum lifting height 9500 mm • Working hours according to the counter 5931 • JCB EcoMax engine: displacement 4399 cc, power 93 KW • CE Standards • IMPORTANT: • The buyer is responsible for everything related to the loading of this equipment • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 5,000 x 2,300 x 2,490 mm, weight approx.: 8,400 kg

Compact Bread Line WP Kemper Imperator CT Superba For the production of: mixed wheat doughs, mixed rye doughs, rye doughs, grain doughs, round breads, tin loafs Year of construction: 09/2015 Condition: checked and cleaned Dough divider, type: Imperator CT Multi measured dough chamber Weight ranges: 150-600 g / 200-2350 g Hourly capacity: 800-1500 pieces Hopper capacity: 200 kg Round and long moulder, type: Superba Compact Reversible belt with anticlockwise and clockwise drive Electronically controlled flour duster