super used for sale

Cardboard remaining stock 374x374x166 mm 3C450g/m2 5,000 pieces We offer 5000 cardboard boxes as remaining stock. We also have matching cans for sale, there can always be 32 pieces of 400ml cans packed in each carton. €0.30 per box for orders of 5,000 pieces, smaller quantities also possible, on request Dimensions: 374x374x166 mm Type of carton: 3C450g/m2 (super stable)

Offer 25286 Specifications: - Saw blade dimensions 400 x 35 x 2.0 mm - Cutting range - 90° round approx. 252 mm - flat approx. 250 x 160 mm - Square approx. 210 x 210 mm - 45° round approx. 160 mm - Flat approx. 150 x 150 mm - Material replenishment machine - max. opening width of the vise 265 mm - mitre-adjustable vise - Coolant device - Drive 400 V / 0.65 / 1.6 kW - Space requirement approx. W 1400 x H 950 x D 1700 mm - Weight approx. 600 kg

Cardboard remaining stock 374x374x166 mm 3C450g/m2 5,000 pieces We offer 5000 cardboard boxes as remaining stock. We also have matching cans for sale, there can always be 32 pieces of 400ml cans packed in each carton. €0.30 per box for orders of 5,000 pieces, smaller quantities also possible, on request Dimensions: 374x374x166 mm Type of carton: 3C450g/m2 (super stable)

Type: Supercoater600 Serial number: 201003-00134 Year of construction: 2010 Belt width: 600 mm Power: 3 x 400V, 50Hz, 1.3kW Dimensions: 1500 x 1150 x 1300 mm

Number of spindles: 5 St. Working width: 240 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min. Weight: ca. 3500 kg control: SCM Control 10 SCM Superset NT with workpiece return ---------------------------------- The machine is in cleaning and completely checking process at the moment. Brief Summary: ---------------------------------- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ---------------------------------- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ---------------------------------- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ---------------------------------- First left vertical spindle Motor with bra ...

bore capacity in steel (diameter): 13,0 mm x-travel: 300 mm y-travel: 130 mm turning speeds: 100 - 2500 U/min throat: 165 mm spindle taper MT: 3 MK table-size: 490 x 120 mm diameter of hob: 30,0 mm motor: 230 Volt total power requirement: 0,75 kW weight of the machine ca.: 50 kg. dimensions of the machine ca.: 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 270 mm saw band length: 2925 x 27 x 0.9 mm capacity 90 degrees: flat: 350 x 240 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 230 x 150 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: flat: 140 x 140 mm table height: 740 mm cutting speed: 36 + 72 m/min clamping range: max. 355 mm total power requirement: 2.0 kW weight: 1180 kg range L-W-H: 2150 x 2400 x 1900 mm Equipment: - Metal band saw - Fully automatic with one-sided miter adjustment - Multifunction digital control panel - Programmable work cycle - Help and self-diagnosis in the event of malfunctions - Coolant system - Saw blade guide with hard metal plates - Hydraulic saw frame lowering - Automatic raising and lowering - Band tension with pressure gauge - Hydraulic vice clamping - Operating instructions (ENG) The data for this ad was created with ModulMWS - the software solution of L ...

a 2-row tortilla oven, gas-powered by the Superior brand (USA). Possible hourly output of 15cm tortillas is a total of 6000 to 7000 per hour

Cantilever rack for light loads, single-sided, frame height 2m, shelf length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized - new product - : Price ex location incl. loading: only 895.-€ (net), plus packaging and freight. Price per additional stand: 225.-€ (net) Price for transport on request! Manufacturer: Bruckamp Year of manufacture: New Type: Super Lightweight Set components: 4 stands with 5 arms / 3 panels with connections Stand distance: approx. 1m Total length of construction area: approx. 3m Shelf height: 2m Foot and arm depth: 500mm Robust construction – made from an IPE 100 with firmly welded arms at a distance of approx. 330mm. Load capacity per stand: 1,000kg Payload per arm: 200kg Incl. ground anchor Incl. stress shield Description: 4 stands with 1 m axial dimension as a set incl. screws. Key benefits: Easy to assemble  ...

Width 35 cm Year of manufacture 1987 Thermal relief printing IR Dryer Mobile substructure Delivery date: short-term Price on request. We supply and install worldwide.

turning diameter: 190 mm turning length: 620 mm control: Fanuc Series 18i-TB total power requirement: 15 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: 5350X3350x2395 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.

Type Of Laminator: Solvent and Solventless // Working Width: 1315 mm

Leftover bread chopper Hommel Rotormat 1000 Super Model: Rotormat 1000 Super "the universal shredder" Stainless steel Powerful Connection 400V,16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: another sieve Service Package Maintenance contract Delivery E-Box for more security! Instruction & Commissioning

Manufacturer: Wagner / J. Wagner GmbH Type: SuperFinish SF 23 Plus Voltage: 230 V AC Frequency: 50 Hz Motor power: 1.3 kW Maximum flow rate: 2.6 l/min Maximum operating pressure: 180 bar Maximum nozzle size: 0.023" Weight: 29 kg Technology: Diaphragm pump (airless) Suction: Top tank or rigid suction system Workable materials: varnishes, primers, glazes, impregnations, oils Special: Brushless motor, low-maintenance, robust design for professional applications

Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system 7.5kw Down Left 11kw rights Mount 75kw Down 5.5kw Pneumatic clamps divided into 2 sections Feed speed adjustable by variator 5-24m/min CE Certificate Technical documentation Net price 68,000zł

Type Of Laminator: Solventless // Working Width: 1315 mm

Vacuum machine Manufacturer: Supervac Lid with plexiglass window On wheels with brakes Microprocessor control with vacuum sensor Integral vacuum pump with motor protection Reliable and easy to service Easy to clean Simple to operate Chamber dimensions: 800x730x250mm Seal lenght: 4x 660mm

General SKU294T680 LocationBarneveld MakeDraiss TypePM SUPERTEX 30 No.56367 Year of construction2001 Pressure Working pressure3 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume31 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand millcheck Capacity31 Ltr. Housing dimensions dia. 240x640 mm Inletdia. 24 mm Outletdia. 24 mm With mechanical sealcheck With jacket7 Ltr. Max. temperature70 °C Motor22 kW 400 Volt With variable speed drivecheck Information Mounted on framecheck With switchas is Weight1250 kg Floorspace1,6x0,9 m Total height2 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, Th ...

Vögele Super 800 asphalt paver, Technical specifications:, - Operating weight: 6100kg, - max. operating weight: 6300kg, - Operating hours: 3260h, - Year of construction: 2007, - bunker side wall hydraulically foldable, - ready for immediate use, Equipment:, - AB200TV Bohle, - 2x 35cm extensions

Key data: 560 mm, 410 mm, 450 mm

YCM Supermax YCM-56 T X-560 mm Y-410 mmZ-450 mm 4 and 5 axis Control: Fanuc MXP 200i Table 700X420 mm Works flawlessly Location: CH

Key data: 350 mm

SPECIFICATIONS: Saw blade: Ø 350 mm Installed power: 2.8 kW Voltage: 380 V Complete with table and extraction system

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: LAINOX Made in Italy Description Oracle is the ideal choice for a dynamic fast-paced restaurant with a wide variety of menus. Very fast cooking grilling toasting defrosting and regeneration of a wide range of fresh and frozen foods such as sandwiches pastries pizza fish vegetables and meat To achieve high performance technologies are used forced supply of hot air up to 3000 W convection from 95 ° C to 270 ° C microwaves up to 2000 W 7-inch touchscreen display memory for 1200 recipes 4-step programming of product preparation power 5.95 kW dimensions 358 x 743 x 578 mm

ELDAN SUPERCHOPPER SC1412 T, Powerful crusher for Tires, Cables, Plastics, Wood, other waste materials, Sturdy supporting structure and frame, vibraring extractor, vibrating extractor, loading hopper, electric cabinet, Goood working conditions, See how it works [HERE](youtu.be/KgxG4KchZkI), working width: 1.400 mm.

Cutting speed: 80m/min, saw blade dimensions X/Y/Z: 2760mm/27mm/0.9mm, miter range: 60°/45°, working height: 950mm, cutting range X/Y: 280mm/150mm, max. cutting diameter: 230mm. Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 350kg. Documentation available. An on site inspection is possible.

Lifting jacks used for positioning of all types of pneumatic transfer in the SUPERVAC range allowing the filling of containers or the feeding of equipment (Mixer, sifter, crusher...), Maximum working height (mm): 2600 , Height (mm): 3450 mm , Extraxe (mm): 760, Total height (mm): 3450 mm, Maximum discharge height (mm): 2600mm, Center distance (mm): 750 mm, Maximum load (kg): 100 , Energy: Pneumatic (SUPERVAC), Link to manufacturer: ceram-sa.fr/potences-elevatrices/, Centre distance: 750mm

Offered are 2 screw compressors with the following features per unit: Power: 15kW, pressure: 10bar, volume flow: 1950l/min (1.95m3/min), speed: 2930rpm, including sound enclosure, 1) year of construction 1989, operating hours: approx. 38100h, 2) year of construction 1986, operating hours: approx. 10600h. Inspection possible by appointment.

🔥 Highlight offer at Form-on! 🔥 Buy the Form-on super plate 15.0 new †available now and ready for immediate delivery. These new super plates are an absolute must-have in formwork accessories : robust, galvanized, and perfect for use with tie rods . 💪 ✨ Special extra: Delivery comes in used reusable containers ♻ †sustainable and safely packed. Note: Containers are not included in the unit price . 🔍 Want to check the quality yourself? No problem: You can inspect the material anytime at our Form-on warehouse †or conveniently via smartVISIT , the digital and fast solution to get an impression of the quality without having to come by in person. 👉 Looking for anchor plates , new super plates , or want to buy Form-on super plates right away? Then don’t miss out on this offer †only while stocks las ...

verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen

SECOND HAND FILTER TYPE - VELO FILTER MODEL - 0057 / MATR OR11 380 VOLT THIS ITEM IS SECOND HAND AND SOLD AS SEEN For more information and more available stock please visit us at - advancedbrewing.co.uk

WORKING AREA 3200 x 2100 mm, X and Z axis 200 mm SPEED X and Y AXIS 70 m/min, Z axis 20 m/min ISAC ITALIA CONTROL 21.5-INCH TFT COLOR SCREEN GRID-ENABLED CONTROL WITH ETHERNET AND USB CONNECTION - 9 kW ISO 30 COPDLE - 9-SPINDLE DRILLING UNIT - LAUNCH MANAGEMENT DRILL - 8-POSITION TOOL CHANGE - 2 vacuum pumps (250 m3/h) - 6 vacuum zones - Loading and lifting unit - Final cleaning unit for slabs - Conveyor belt unit for unloading workpieces - Alpha CAM CAD/CAM software - Alpha Software Cam xNesting - Security barriers to protect against unauthorized access

Used W&P bread roll line, type: MULTIMATIC MUC-5 with Super B Compact - Head machine / dough divider Multimatic MUC-5 - 5 rows - Up to 95g dough weight per dough piece - Proofer Super B Compact - for emperor and sliced rolls - with side discharge - The system was in operation until the end Visits and test runs are possible by arrangement.

For sale is a used bag in box system from OK with 3 rolls of consumables. In addition to the system, a used Heripack carton erector and sealer as well as conveyor technology and a printer system can be purchased as an option. Send us your task and we will discuss the optimal solution for a fair budget. 10.00" x 8.00" x 6.00" (L x W x H) min. 250mm x 200mm x 100mm (L x W x H) min. 25.00" x 18.00" x 20.00" (L x W x H) max. 650mm x 450mm x 500mm (L x W x H) max. up to 18 boxes per minute. All standard polyethylene films (HDPE, LDPE, LLDPE, stainless steel, electro-galvanized. More information will be provided later. co-extrusions.). For sale is a used bag-in-box system with three rolls of consumables. Optionally, a used Heripack carton erector and sealer, conveyor technology, and a printer system are also available. Please send us your requirements, and we will discuss the optimal solution ...

feed pressure: 8 bar Effective free air delivery: 235/165 L/min Receiver capacity: 50 / 10 l / bar weight of the machine ca.: 37,5 kg. Number of cylinders: 2 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 790 x 400 x 730 mm This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Mazak SUPER TURBO-X 612 MK III G was manufactured in 2015. It features a maximum cutting area of 2000 × 4000 mm and a resonator power of 4 kW. Standard equipment includes an Automatic Nozzle Changer, Auto Calibration, and a Safety Cover. Additional features like a 2-Pallet Changer and a Dust Collector enhance its functionality. If you are looking to get high-quality cutting capabilities, consider the Mazak SUPER TURBO-X 612 MK III G machine we have for sale. Contact us for more information.

This SCM Superset NTE was manufactured in 2008. A robust used profile milling machine featuring a touchscreen operation, 6 spindles including a UNIWELLE, and a spindle speed of 8300 rpm. It offers a working width up to 240 mm and includes a quick-change spindle system with Powerlock HSK 85. Ideal for detailed woodworking with its comprehensive tooling and motor-driven feed rollers. Contact us for more information about this machine.

: ja miter: 1500 mm : 230 mm weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine.

Number of spindles: 6 St. Working width: 240 mm Working height: 120 mm Dimensions (L/W/H): 4900 x 1700 x 1700 mm weight of the machine ca.: 3500 kg Control: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts 14 axis control with touch screen - WINDOW VERSION Machine with 6 spindles Spindle speed 8,300 rpm Working width 240 mm, working height 120 mm Electronic horizontal and vertical positioning of the spindles Glazing bead cutting Touchscreen controls Detailed technical description, see adjacent PDF documents. Suction nozzle diameter: 1. Spindle down: 120mm 2nd spindle right: 120 mm 3. Left spindle: 120 mm 4. Spindle top: 150mm 5. Spindle top: 150mm 6. Spindle below: 120mm Option: workpiece return to the operator Images are from our archive of a machine of the same model. (Technical information according to the manufacturer - without guarantee!) The data for t ...

Key data: 4300 mm

older Gebr. Panel saw incl. extraction Technical data ( data according to brochure ) Saw blade diameter 300 mm Cutting depth yes depending on material 70 / 80 mm Cutting length 4300 mm Weight approx. 900 kg Space requirement approx. 6000 x 1500 x Height 2900 mm

round bar steel: 34 mm square edge steel: 30 x 30 mm L-beam: 100 x 10 mm flat steel: 100 x 14...160 x 11 mm blade length: 175 mm T-beam: 100 x 10 mm notching: l + T material: 10 mm hole punhing press: pressure: 45 t throat: 305 mm total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,4 x 0,8 x 1,5 m 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch 2 foot switches contact limit stop various punching saddles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details.

Manufacturer: Hugo Beck Model: Super 400 K5 Year of Manufacture: 2010 Machine Type : Horizontal Flow Wrapping Machine Used horizontal flow wrapping machine in good condition. Suitable for wrapping a wide range of products in polyolefin, PE, or PP film. - Product dimensions: up to 480 mm wide, 150 mm high, from 40 mm in length. - Output: up to 5,000 cycles per hour. - Working height: 820 to 900 mm - Machine weight: approx. 2,100 kg. - Film roll: max. diameter 400 mm, max. width 600 mm. - Power: approx. 12 kW - Supply voltage: 3 x 400/230 V, 50 Hz. Equipment included: film folding device FF700-IN, print mark control, seal welding with euro slot, longitudinal weld overlap 10 to 30 mm, press belt, pneumatically controlled press roller. Full documentation available: operator manual, electrical diagrams, spare parts lists, maintenance schedule, machine drawings, and third-party componen ...

This 5-axis MORI SEIKI ZV 400 SUPER MILLER was manufactured in 2005. It features an X-axis travel of 600 mm, Y-axis travel of 425 mm, and Z-axis travel of 450 mm. The machine includes a table diameter of Ø 350 mm and a maximum workpiece weight of 200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI ZV 400 SUPER MILLER vertical machining centre we have for sale. Contact us for further details.

natural gas engine, HP: 2650, Working hours: 56157, RPM: 900

Manufacturer: Mazak Model: Super Turbo X510 MkII Year of Manufacture: 2007 Machine Type : Flatbed CO2 laser cutting machine CNC control: Mazatrol Preview Operating hours : 27.000 h Technical Specifications - Working area: 3050 x 1525 mm (5 ft x 10 ft) - X axis travel: 3235 mm - Y axis travel: 1545 mm - Z axis travel: 100 mm - Laser type: CO2 continuous wave - Laser power: 2,500 W or 4,000 W depending on version and resonator fitted - Maximum workpiece size: 3050 x 1525 x 22 mm - Maximum table load: 805 to 930 kg - Rapid traverse speed: 24 m/min (945 IPM) - Maximum cutting speed: 20 m/min - Machine weight: approximately 12,700 to 13,900 kg depending on configuration Maximum Cutting Thickness by Material - Mild steel: up to 22 mm - Stainless steel: up to 12 mm - Aluminium: up to 8 mm Find more here - / Contact us at -

One used complete mesh ( standard, special and engineered mesh ) for sale, exesting of: One used JAGER SCHLATTER Superflex mesh welding line: The Superflex system processes all materials used in the reinforcing mesh industry and offers maximum design freedom with the programmable mesh linear extension. The system is equipped with motorized, infinitely adjustable compact welding groups that automatically adapt to the geometry of the next mesh. This feature enables seamless transitions and quick adaptation to changing production requirements. Variable cross wire spacings can be precisely implemented, making the system ideal for the production of list and special mesh. This versatility gives companies a clear advantage in the reinforcing mesh market and enables economical production with a high degree of flexibility. One used Progress MSR2 straightening/cutting machine is a high- ...

Frequency converter, frequency converter, drive converter, controller, variable speed drive, thermal system -Manufacturer: Laird, Thermal Systems Thermoelectric Peltier module -Voltage: 24 VDC/3.4 A -Cooling power: 71 W. -Price: per piece -Number: 15 piece -Dimensions: 230/120/H150 mm -Weight 2.4 kg/piece

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Superior Electric SLO-SYN Synchronous / Stepping Motor stepper motor -Type MO92-FD08 -Shaft: Ø 10 x 30 mm -Quantity: 2x stepper motor available -Price per piece -Dimension: 125/85/H85 mm -Weight: 2.4 kg/pc.