sui 125 used for sale

automatic baler Manufacturer: PAAL Type: KONTI 125 D / SO Year of Make: 2002 Technical data: Press force: 60 t at 300 bar Specific pressing force: 7.79 kg/cm² Channel format: 700 x 1,100 mm Bale weight: 425 - 580 kg, depending on material and bale length Filling opening: 1,400 x 1,020 mm Machine weight: approx. 20 t Drive power: 30 kW Throughput: 150 m³/h Pressing capacity: approx. 5.00 t/h at department store (35 kg/m³ bulk density) approx. 8.75 t/h for mixed paper (60 kg/m³ bulk density) approx. 12.5 t/h for collected goods (100 kg/m³ bulk density) Wirbulator, which can be swivelled in by hand, has been retrofitted. Optionally with: Press feed belt Manufacturer: PAAL Type KEM 1400 Year of Make: 2002 Technical data: Conveyor width: approx. 1,400 mm Wheelbase: approx. 14,250 mm Feed length: approx.  ...

; Gross weight [kg]: 7970; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

; Gross weight [kg]: 14000; Engine: Caterpillar 3512; Accessories: Control Panel, Including: Coolant heater 9kW

spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face mill -Manufacturer: Seco, Secodex Face milling cutter head without indexable inserts -Type: Secodex R257.1- 125 -Hole: Ø 40 mm -Dimensions: Ø 136 x 62 mm -Weight: 3.9 kg

turning diameter over slide rest: 940 mm turning length: 10000 mm turning diameter: 1250 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: 75 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw faceplate Power compound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mm turning length: / mm workpiece length: / mm Drum brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mm turning length: / mm workpiece length: / mm Drum brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mm turning length: / mm workpiece length: / mm Drum brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mm turning length: / mm workpiece length: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (powder jet), water-cooled motor. Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (powder jet), water-cooled motor. Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

; Power [PS]: 170; Gross weight [kg]: 8250; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach

A high-quality GARANT LCV 125 G is offered for professional use on CNC machining centres. The clamp impresses with its high clamping force, precision and optimum accessibility and is ideal for 5-axis machining and complex milling work. Technical features Manufacturer: GARANT Type: LCV 125 G Jaw width: 125 mm High clamping force with compact design Precise workpiece positioning Ideal for 5-sided and 5-axis machining Robust industrial design Pros High repeatability Optimal accessibility for milling tools Reduced set-up times Safe and low-vibration workpiece clamping Suitable for single part and series production Condition Used, fully functional. Normal signs of use from industrial use present.

Round brush, grinding wheel, chip brush, wire brush -Round brush: Steel wire brush, 200 pieces -Outer diameter: 126 mm -Width: 35 mm -Bore diameter: 13 mm -Submission/Price: complete -Weight: 0.5 kg/piece

This 3-axis DMG MORI NLX2500SY/1250 was manufactured in 2013. It features a maximum X-axis travel of 260 mm, Y-axis travel of +/- 50 mm, and Z-axis travel of 1345 mm. The machine is equipped with a 12 station turret with milling function and a spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX2500SY/1250 horizontal turning machine we have for sale. Contact us for further details.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.

This 5-axis CHIRON MILL FX 1250 was manufactured in 2015. It has a mass of 9700 kg and operates at a voltage of 400 V with a full load current of 63 A. If you are looking to get high-quality machining capabilities, consider the CHIRON MILL FX 1250 vertical machining centre we have for sale. Contact us for further details.

There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg.

HAKO Citymaster 1250 Municipal equipment carrier with winter maintenance equipment - KIF Keil Vario snow plough with 145cm clearing width - KIF box spreader - Tipper platform This Hako Citymaster 1250 was first commissioned in 2015, has only about 444 total operating hours according to the meter and is in good general condition with the usual signs of use and wear, fresh from the small customer service, immediately ready for use. The sale is made as a used machine under exclusion of return, guarantee and warranty. - Net price 27.900,-€ // Gross price 33.201,-€ - Inspection / test drive possible - Shipping can be organized nationwide, the costs depend on the distance! - We would be happy to have an attractive leasing / financing offer prepared for you by our leasing partner!

Working width: 6000mm, max. sheet thickness: 1.25mm, control panel: Siemens SIMATIC HMI, including electric rotary shear, an on-site inspection is possible.

Agfa ST 125SX Plate Stacker

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSlide 1Longitudina ...

; Power [PS]: 61; Gross weight [kg]: 4000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x125kW - DC socket: 1x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x125kW; Water Tank Volume [l]: 300

CNC punching machine manufactured in 2004. This Euromac BX 1250/30 features advanced capabilities for precision punching tasks. If you are looking to get high-quality punching capabilities, consider the Euromac BX 1250/30 machine we have for sale. Contact us for further details.

Qty. 1 Second-hand profile forming production line – already in storage Mfc.: Incheon Industry Machine Co Model No.: 1250-RC Built: 2019 This line that continuously produces products weighing 30 kg or less using the roller forming Method - Forming line for deck plate use for building construction. State condition: Dismantled, Stock in warehouse Raw material: Cold rolled steel strip Strip width: 1250 mm Thickness: 0.5 – 1.2 mm Coil ID: 508 mm OD: 2000 mm Weight Max.: 15,000 kg Forming stands: 40 stands / 100 mm x 1250 mm space Mill reducer Worm reducer Mill Drive: 90 kW with reducer Line speed Max.: 12.5 m/min Deep for form Max.: 100 mm Electric voltage source: 220 V, 3 ph., 60 Hz