129,235 used machines on RESALE, but how to find them? Machine Search
Clamping plate, welding table, welding table, straightening plate -Length: 2285 mm -Width: 1250 mm -Height: 780 mm -Sheet thickness: 75 mm -Weight: 1737 kg
Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!
Clamping plate, welding table, welding table, straightening plate -Steel table -Length: 2200 mm -Width: 1255 mm -Height: 705 mm -Panel thickness: 69 mm -Weight: 1396 kg
Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 125 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 30 x 270 mm -Weight: 0.4 kg/piece
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 125mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 267 mm -Weight: 0.4 kg/piece
SCHAUBLIN 125 High precision lathe Diameter over the bed 270 mm Diameter over cross slide 120 mm Height of centers 125 mm Bed length 1000 mm Distance between centers 500 mm Spindle speed 45-3000 rpm Spindle nose Camlock D1-3 " Rapid traverse of the carriage 440 mm/min Longitudinal stroke 90 mm Cross travel 130 mm Vertical power feed 4-260 mm/min Metric threads 0.25-3.5 mm Spindle for collets B32 Tailstock cone MK 2 English pitches 112-6/1″ Special pitches 0.25-8 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension 1500 x 850 x 1300 mm Weight approx. 950 kg
Centrifugal pump, water pump -Delivery rate: 18 m³/h -Motor power: 1.1 kW -Connection: 380 V -Speed: 1400 rpm -Pipe connection inlet: DN Ø 64 mm -Pipe connection outlet: DN Ø 49 mm -Dimensions: 410/250/H300 mm -Weight: 34 kg
Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain
Tailstock, counter bearing for dividing head, dividing head -Tip height: 125 mm -Design: Angle adjustment -Tip mount: MK2 -Dimensions: 260/114/H145mm -Weight: 10kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA59220-0125 -Stroke: 125 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 290/55/H55 mm -Weight: 1.25 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 125 mm -Piston diameter: 16 mm -Piston rod: 6 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 20 x 236 mm -Weight: 0.15 kg/piece
A used spiral kneading machine Kemper SP 125 L is currently for sale and immediately available in our warehouse in Bielefeld. Spiral kneading machine Kemper SP 125 L - Stainless steel boiler - Stainless steel spiral - 2 x automatic timers - 2 x slow and fast speeds - with flour dust cover - for 125 kg of flour or 200 kg of dough The machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.
Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 198/125 mm -Height: 58 mm -Weight: 2.8 kg
Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 125/90 mm -Height: 69 mm -Weight: 0.8 kg
Fong Kee (Taiwan) Year of manufacture 2016 Double Head (125mm screw) Accumulator type continue extrusion machine Machine In production Product type 160 Liter Float Dimensions 1188mm x 875mm x 407mm net weight 9kgs gross weight 17kgs estimate production rate 30/32pcs per hour Mold dimensions 1300mm x 1260mm x 860mm
Lifting mixer Kemper F 125 ASL extendable - with 2 speeds - with 2 automatic timers - with stainless steel lifting arm - max. 125kg flour or 200kg dough per kettle - with flour dust cover - Boiler with handle
AGFA ADAMAS 125 COU ( Clean out unit ) Washer for Adamas printing plates. Excellent condition, little used. online version without tables. Stock! AGFA ADAMAS 125 COU ( Clean out unit ) washer for Adamas processing. Excellent condition, was very rare in use. Online version without infeed and outlet. Processor is on stock and can be inspected on appointment.
Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/125 mm -Height: 58 mm -Number: 9x pillows available -Price: per piece -Weight: 2.9 kg/piece
Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 125/79 mm -Height: 50 mm -Delivery of: steel/stainless steel cover plates possible -Number: 2x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.2 kg/piece
Valve, control valve, emergency stop valve -Type: VAC-14 VIZ-3311-LOVB-125G -Number: 10 valves available -Price: per piece -Dimensions: 195/90/H60 mm -Weight: 1 kg
Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-100-125 PPV -Piston: Ø 100 mm -Stroke: 125 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 126/126/H358 mm -Weight: 8.3 kg
MIG/MAG hose package -Length: 4.2 m -Water cooled -Weight: 1.9 kg
3 Clamps Perfect Binder, Auto Cover Feeder with Scoring (Suction), Hot Spine Gluing & Milling & Notching Unit, Speed: Up to 1250 Books Per Hour, Book Block Format: Max. 420x290, Min. 125x105mm, Binding Thickness: 3 to 45mm, Conveyor Delivery
Kemper Lifting Kneader F125 ASL extendable with 2 stainless steel shells 2 speeds 2 timers Stainless steel lifting arm Year of construction: 2001 Flour dust cover overhauled and repainted
Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/Inside: Ø 125/60.3 mm -Height: 58 mm -Number: 12x pillows available -Price: per piece -Weight: 1.3 kg/piece
The scope of delivery includes: 01x DB-Gitterbox, used Design: incl. floor overall width: approx. 1,250 mm total depth: approx. 840 mm total height: approx. 970 mm Note: It is a used DB lattice box. There may be scratches, dirt and other signs of wear. Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Stock # U2421-1 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.
Nowicki KN1-125 Bowl cutter Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph
Electric motor, lighting current motor -Voltage: 220 volts -Power: 0.37 kW -Speed: 2860 rpm -Shaft: Ø 11 mm -Design: B5 -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 230/210/H195 mm -Weight: 7.4 kg/piece
Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet -Adjustable -Support surface width: 125 mm -Price: per piece -Number: 17 pieces -Dimensions: 278/125/H78 mm -Weight: 8.1 kg/piece
Stainless steel kneading bowl with trolley for spiral mixer SP 125 A, Fabr. Kemper,
Stainless steel kneading bowl with trolley for spiral mixer SP 125 A, Fabr. Kemper,
Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 47 mm -large recess: Ø 50 mm -Quantity: 2 available -Price: per piece -Dimensions: Ø 81/H40 mm -Weight: 0.1 kg
Diaphragm pump, centrifugal pump, water pump, chemical pump -Flow rate: approx. 40 l/min -pneumatically driven -Connection: 8 bar max. -Dimensions: 270/200/H140 mm -Weight: 6 kg
Next TETRA PAK TBA 19 125ML SLIM COMPLETE LINE FOR SALE Item #: Usm-182 Category Tetra Pak TBA 19 TBA 19 125ml Filling Machine,Version 10v Year of manufacturing 2003 Tetra Straw Applicator TSA 21, Year of manufacturing 2003 Tetra Packer, TCBP 70, Year of manufacturing 2003 Tetra Shrink TTS 51, Year of manufacturing 2003 Tetra Easy Ride & Conveyors Control System Conveyors & Paper Trolly Condition: Excellent & tetra pak maintained.
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm -Piston rod: Ø 36 mm -Stroke: 125 mm -universally applicable: -Number: 2x available -Price: per piece -Dimensions: Ø 95/H575 mm -Weight: 19 kg
Transnorm conveyor belt GF 1250-600-500 RA2096 Technical data: Conveyor length (NL): 1250mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg
Centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. Delivery rate: 2.0 m³/h -Max. H: 14.5 m -Motor power: 1.97 kW -Speed: 2840 rpm -Quantity: 1 piece available -Dimensions: 380/205/H285 mm -Weight: 33kg/
The inclination scale is fully functional. The scope of delivery includes: 01x Inclination scale, used Manufacturer: Rapido-Werke Dimensions: approx. 1,250 x 1,360 x 2,250 mm (WxDxH) Maximum load: 750 kg Feet: 04x / height adjustable with tare compensation Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WMW drilling machine -Travel: approx. 1200 mm -Clamping plate width: 1405 x 1250 mm -Dimensions: 2900/1350/H940 mm -Weight: approx. 1200 kg
Vacuum homogenizer, process plant Becomix RW 125 CD Machine COMPLETE BECOMIX RW 125 CD HOMOGENIZER IN VERY GOOD CONDITION. Maschine comes from product development. Commissioning December 2007 composed of: 1. Vacuum homogenizer in pharmaceutical design, homogenizer water-cooled and with Becomix Powder Jet Manufacturer: Becomix Type RW 125 CD Year of construction 2006, very good condition, commissioning December 2007 Capacity usable volume 125 l Vacuum and flameproof -1/+2 bar Heating jacket 21 l Pressure-resistant 4 bar 3. Bcomix Promas CS Control 4. 1 piece of energy frame incl. valves, vacuum pume, 5. Control cabinet with frequency converters 6. Control cabinet with Siemens S-7 and control panel with Promas CS software 7. Complete documentation including FAT, IQ, OQ.
used, as good as new butter wrapping machine from SchmidtTec. Year of construction 2017 Output up to 1,200 pcs./hour Filling volume: 125g Format: L=100mm, W= 55mm, H= 25mm The machine was used for packaging Bio butter. Mint condition.
Volume : 1250 ltr. Material : areas in contact with the product in stainless steel Top condition !
maximum number of results exceeded
please refine your search
