sui 125 used for sale

: gebraucht : 2892E : China : 450 € : 1 : 125 mm : 45 mm : 100 mm : 29 kg MINT CONDITION 2 axes machine vice for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm stroke: 250 mm table width: 120 mm table height: 900 mm column arm: 320 mm return speed: 100 mm/sec working feed: 10 mm/sec control: Cybelec DNC 70 quantity of oil: ca. 250 l total power requirement: 11 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille) Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A GSW decoiler is available. Load capacity: 3000kg, strip width: 650mm, max. strip cross-section: 107.5mm/0.35mm, machine dimensions Y/Z: approx. 1150mm/2000mm. An on-site inspection is possible.

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

sheet width: 1250 mm plate thickness: 1,5 mm distance between columns: 1300 mm daylight opening: 80 mm : 155 ° total power requirement: Handbetrieben weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

An industrial large-format welding rectifier ESAB is available. Rated current: 1250A, welding voltage: 44V, power factor: 0.92, weight: approx. 490kg. An on-site inspection is possible.

; Power [PS]: 170; Gross weight [kg]: 3701; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x100kW, 1x30kW, - AC copper: 3P/4W, 100kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x100kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 100k

: neu : Bulgarien : 133520 € : 2523.53 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 1/16 - 60 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 118 670,00 turn ...

Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station

General SKU053A266 MakeTerlet Zutphen No.81 101 Year of constructionunknown Mounted on legsMounted on wheels Main Features MaterialStainless steel Volume1250 Ltr. Motor1.8 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity1250 Ltr Vessel sizesdia. 1200x1100mm Slope bottomConical top side Manholedia. 495mm Outletdia. 45mm With paddle stirrercheck Motor1,1/1,8 KW, 380 Volt MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchcheck Floorspace1,2x1,4 M Total height2,1 MDiscountStirring vesselsTerletDiscountStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many  ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 2200 mm   Y-axis travel: 1600 mm   Z-axis travel: 1850 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° TABLE   table surface (left-right): 1000 mm   table surface (front-back): 1250 mm   workpiece load (max): 5000 kg SPINDLE / HEAD   spindle revolutions (min): 20 /min   spindle revolutions (max): 10000 /min AXIS DRIVES   rapid traverse: 40000 mm/min TOOL MAGAZINE   number of positions: 60   tool diameter max.: 110 mm   - with free neighbour positions: 250 mm   tool length max.: 450 mm   tool  ...

CONTROLS   CNC controls MORI SEIKI MSX 850 BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 920 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes

: neu : ca. 4 Monate ab Auftragse : 1280 mm : 12 mm : 9 mm : 9 1/min : 3 ° : 7 : 500 mm : 15 kW : 180 l : 950 mm : 1950 mm : 1200 mm : 1800 mm : 3200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 6112A : prompt, Zwischenverkauf v : China : 110 € : 1 : 530 - 870 mm : 700 kg : 20 kg : 2 x 125 mm : 52 mm : 2 univsersal useable (band saws, circular saws, eg.) infinitely variable height adjustment perfect for round tubes, because of V-type The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1280 mm : 16 mm : 12 mm : 8 1/min : 3 ° : 7 : 500 mm : 22.5 kW : 250 l : 950 mm : 2100 mm : 1400 mm : 2000 mm : 5000 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mm turning diameter over slide rest: 900 mm turning length: 5000 mm faceplate: 1250 mm workpiece weight in steadies max.: 20000 kg steady: mm steady: mm workpiece weight: 16000 kg total power requirement: kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was ...

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1115 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1250 , Generator Hz: 60 , Generator Volts: 380/220 , Generator Amps: 1899 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/mtu-16v2000-generator-1250kva- used/454, , = More information =, , Type number: 16V2000 GENERATOR 1250KVA

: neu : 2024 : 2517 : prompt, Zwischenverkauf v : Deutschland : 36720 € : 701.35 € : 1 : 1500x3000 mm : Hypertherm Powermax 125 : 25 mm : 25 mm : 57 mm : 25 mm : 125 A : 24 m/min : 1/10 mm : 400 kg/m² : 3560 mm : 1960 mm : 1500 mm : 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT • Entry guide • 2 Feeding rolls • 5 Straightening rolls • Cut-to-length shears • Encoder • Touch screen control • Servomotor • Slitting shaft with 2 sets of quickly adjustable circular blades, to a maximum of 6 blades OPTIONS - Film plastic device - Different types of uncoilers - Stacking systems - Recoiler Maximum Width: Material to be processed: Thickness: Number of simultaneous slitting cuts: Production speed: Coil loading capacity: Number of straightening rolls: Straightening ServoMotor: Shears Power: Dimensions: 1250 Steel 420 Nw/mm2 1`25 mm 2 from 0 zu 120 Meter pro Minute 3, 6, 10 to 2 + 5 15 kW 3 kW 2100 x 1700 x 1450 mm 2500 kg 1`00 mm 4 0`50 mm 6 Steel 700 Nw/mm2 0`75 mm 2 0`50 mm 4 Aluminium 200 Nw/mm2 2`50 mm 2 1`50 mm 1`00 mm 6 If you are interested, please send us your enquiry with the ...

General SKU117W596 MakeKrauss Maffei TypeVZO-125/2,5 No.9708 Year of construction1984 LocationBarneveld Main Features MaterialStainless steel Motor30 KW Inlet diameter1250 mm Specified Features - Basket centrifuge Basket centrifuge(1x) Perforated basketcheck Basket sizesdia. 1250x630mm Wall thickness12mm Max. loading weight485 KG With scrapercheck Hydraulic operated(motor hydr. unit 0,55 KW 220/380 Volt Ex) Liquid outlet165x165mm Motor17,0/30,0 KW, 390 volt (Ex) Max. basket speed950 Rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,4x1,8 M Total height2,8 M ATEX compatiblecheckDiscountBasket centrifugesKrauss MaffeiDiscountCentrifuges > Basket centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

General SKU035B247 LocationBarneveld MakeCoti SRL Curnasco No.205 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume12520 Ltr. Motor90 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity12.520 l Vessel sizesdia. 2200 x 2400 mm Dished bottomcheck Dished top sidecheck Manholedia. 250 mm Top connections(10) Outletdia. 100mm Half coil jacketed(450 Ltr) Max. temperature150°C With gate type stirrerequipped with scrapers (motor 22 kW(Ex): 9 rpm) With paddle stirrer/screw ribbon stirrer type DM 1250/300 Motor90,0 kW (380 V, 1460 rpm (Ex) Speed mixing shaft40 rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304) Information Year of construction1999 Floorspace2,8 x 2,8 m Total height6,0 m Weight6000 kg ATEX compatiblecheckCatalysts & fillersStainless Steel Re ...

General SKU083N398 MakeComber No.2592 Mounted on framecheck Main Features MaterialStainless steel Volume125 Ltr. Motor5.5 KW Specified Features - Paddle dryer Paddle dryercheckHooks on the wall for self cleaning paddels Capacity125 Ltr. Trough sizesDia. 450x800mm InletDia. 200mm + Dia 125mm OutletDia. 95mm With jacketcheck Shaft can be heatedcheck Motor5,5 KW, 415 Volt With variable speed drivecheck MaterialStainless steel Information LocationBarneveld Floorspace3,2x1,1 M Total height2,0 MCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPaddle dryersAgrochemicalsBiotechnologyOther chemicalStarchFine chemicalsOintmentsGeneric medicinesPowdered foodsComberIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additi ...

: neu : Bulgarien : 122250 € : 2310.53 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 MK : 5 - 1000 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 107 770,00 turning length2.000 mm € 112 550,00 turning length4.000 mm € 130 160,00 turning lengt ...

: gebraucht : 2889J : China : 150 € : 1 : 125 mm : 44 mm : 100 mm : 16 kg MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (Sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 9676 : prompt, Zwischenverkauf v : Deutschland : 13700 € : 1 : 1250 mm : 1.25 mm : 1,25 mm bei 1 Messerpaar, : 0.37 kW : 36 m/min : 70 mm : 1900 mm : 1600 mm : 1000 mm : 350 kg demo machine / mint condition - fixprice 3 pairs of blades Length measuring by wheel Digital preselection of one position Brake motor Rubber feeding rolls Manual crosscutting equipment in front and behind blade shaft with 1 cutting slide which alternaingly can be used on front and backside User manual in GERMAN OPTIONS: Additional pair of blades Decoiler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 8200 € : 158.26 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 1250 400 M D1300) € 10.900,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LINEA RICICLO PLASTICA TANDEM - NASTRO TRASPORTATORE CON METALDETECTOR - TRITURATORE GM 125 AF/T - ESTRUSORE MONOVITE GM 125/28D - DOSATORE MASTER DPM 15/50, gm 125, CACO3 DPM 2V SPC - CAMBIA FILTRO FIMIC RS 500 - CAMERA SOTTO VUOTO DEL SISTEMA DEGASSAGGIO - ESTRUSORE MONOVITE SECONDARIO GM 140/18D - CAMBIAFILTRO A PIASTRA GM125/200 MF - TAGLIO AD ANELLO LIQUIDO TDA 6.0 - VIBROVAGLIO VB 200

Panel return system for single-sided edging machine in left-hand version with a length of approx. 12m50 Panel length 240 to 2700 mm Panel width 60 to 1000 mm Panel thickness 8 to 80 mm Min/max panel dimensions with 4-sided machining: 240 x 80 mm, 2500 x 1000 mm Working height 950 mm At the machine outlet is a tilting air table that returns the workpieces on a conveyor belt to the machine operator Tilting air table with dimensions 2500 x 1400 mm Air table at the front of the machine inlet with dimensions 720 x 580 mm Brush cleaning of the return belt air table at the end of the return conveyor with dimensions 2500 x 1250 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 117000 € : 2211.3 € : 125 to : 500 mm : 800 x 400 mm : 900 x 600 mm : 600 mm : 300 mm : 115 mm/s : 42 mm/s : 7 mm/s : 70 mm/s : 15 kW : 1400 mm : 1950 mm : 2600 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm conveyor belt GF 1250-600-500 RA2096 Technical data: Conveyor length (NL): 1250mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 1250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

The TBA 19 line in the 125ml Slim format is particularly suitable for products that are filled in small and slim cardboard packaging. For example, tomato paste or dairy products. It enables reliable and efficient packaging in Tetra Pak cartons.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 1965.6 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 30100 € : 574.91 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Consisting of a TBA 19 200V 125 ml Slim filling machine with a Tetra Pak straw applicator TSA 21 Tetra Pak TrayPacker TCBP 70 Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm Dist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mm Distance between spindle axis and column:350 - 1260 spindle taper:4 MK Range of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mm total power requirement:3,5 kW dimensions of the machine ca.:2150x1070x2840 m feed:0,09 - 1,5 m/min weight of the machine ca.:3 t

x-travel:1.250 mm y-travel:880 mm z-travel:800 mm spindle turning speed range:1 - 10.000 U/min high speed spindle taper ISO:50 table-size:1.250 x 1.000 mm max. workpiece weight: 2.000 kg feed speeds infinitely variable:1 - 30.000 mm/min rapid traverse speed:40 m/min weight of the machine ca.:16 t dimensions of the machine ca.:7,2 x 4,4 x 2,9 m

grinding length:1250 mm grinding width:400 mm workpiece height:550 mm workpiece weight:750 kg table-size:1720 x 400 mm magnetic clamping plate:1250 x 400 mm dist. center of grinding spindle - table:750 mm turning speed range - grinding wheel:3000 U/min Length movement of the table:1300 mm grinding wheel size:Ø 400 x 50 x 127 mm switchgear cabinet:inkl. hydraulic power unit:inkl. coolant:inkl. voltage:380 V table load:max. 1100 total power requirement:13,8 kW weight of the machine ca.:6000 kg dimensions of the machine ca.:5000 x 3400 x 2400 mm Documents:inkl.

x-travel:1250 mm y-travel:880 mm z-travel:800 mm control: Heidenhain TNC 430 tool change unit:60 Pos. Tool bore:SK 50 turning speeds:8000 1/min size of pallet:1000 x 800 mm total power requirement:56 kVA weight of the machine ca.:14,3 t dimensions of the machine ca.:5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020

grinding length:1250 mm grinding width:600 mm workpiece height:730 mm table surface area:1720 x 500 mm headstock: dist. table - spindle center:900 mm max. longitudinal movement:X-1450 feed range:10 - 20.000 mm/min vertical movement:Y-730 mm feed range:0,2 - 3.000 mm/min cross travel:Z-550 mm feed range:5 - 5.000 mm/min power capacity:1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds:50-6.000 U/min cutting speed:max. 80 m/sec. weight of the machine ca.:11 t with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect.

pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m

pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm power requirement:46,5 kW weight:29,5 t roll feed:mechanical, Schuler, WK 8-250

pressure:160 t stroke:160 fix mm no. of strokes:30 - 120 /min distance between columns:1190 mm distance table/ram, max. stroke up, adjustment up:735 mm table surface area:1200 x 1000 mm hole in the table:500 x 300 mm table height over floor:900 mm side window:600 mm ram surface:1000 x 800 mm ram adjustment:125 mm material width of feeder:550 mm material thickness of feeder:0 - 6,0 mm feed length:350 mm material cross-cut:1100 mm² Feed speed:50 m/min power requirement:45,0 kW weight:25,0 t dimensions (WxDxH):2,3 x 2,1 x 4,7 m infinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90

pressure:125 t throat:340 mm stroke:20 - 160 mm no. of strokes:55 /min distance table/ram, max. stroke up, adjustment up:480 mm table surface area:1000 x 660 mm table height over floor:730 mm ram surface:600 x 300 mm ram adjustment:75 mm power requirement:8,5 kW weight:7,8 t dimensions (WxDxH):1,4 x 2,8 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

pressure:125 t distance between columns:2100 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table area:2230 x 1300 mm die cushion pressure in table:63 t die cushion stroke in table:60 mm surface of drawing cushion:1000 x 900 mm table height above floor:1050 mm side window:1000 mm ram surface:2100 x 1000 mm speed down:50 mm/s speed up:50 mm/s working speed:10 mm/s oil volume:410 l height above floor:5,95 mm power requirement:22,0 kW Weight:31,0 t Dimensions (WxDxH):3,1 x 1,7 x 5,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic foundation pit:not necessary