128,241 used machines on RESALE, but how to find them? Machine Search
Eccentric punching machine HAULICK + ROOS type RVD 125Double column - Eccentric pressMasch. No. 212560 Year of construction 1981Compressive force 125 ton. Table size 880 x 800 mmTable opening 470 x 140 mmStand width 900 mmStand width laterally 415 mmRam stroke 45 mmRam adjustment range 0-80 mmInstallation height in the picture 340 mmStroke rate 50 to 300 strokes/min. Engine power main drive 22 kWNe-connection 380 Volt, 50 Hz- Double connecting rod engine with 4-bearing eccentric shaft for off-center tappet pressure
Lift table HANDY type 1250E Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG
Lift table HANDY type 1250E - No 2 Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaTurning diameter500 mmSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...
Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible.
Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Technical details: Manufacturer: Transnorm Type: Belt Curve 125° right TS 1500-100 Curved belt conveyor Year of manufacture: 2001 Angle: 125° Running direction: right inner radius (IR): 600 mm belt width (GB): 600 mm Speed: please contact, motor not yet mounted Belt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required) Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side ...
Transnorm belt conveyor GF 2200-1120-1000 RA2391 Technical data: Conveying length (NL): 2200 mm Framework width (NB): 1120 mm belt width (GuB): 1000 mm Framework width including Motor (MB): 1500 mm height (BH): 110 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.4-1.3 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 1250 Belt width in mm: 1100 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,5-1,5 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...
The machine is in good technical condition, testing is possible by prior arrangement.
loading area: mit Untergestell weight: 125 kg length: 900 mm height: 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press brake with Stäubli robot cell press Manufacturer: LA G Model: GBS R 1250 50 The machine was only used for a very short period of time.
Height=1.75 m, Overall length= 3 m, Overall width= 1.7 m, Net weight= 1050 kg,
pressure: 125 t chamfer lenght: 3050 mm distance between columns: 2550 mm ajustment speed: 90.0 mm/sec working feed: 10.0 mm/sec return speed: 75.0 mm/sec stroke: 140 mm dayligth: 375 mm column arm: 250 mm table width: 90.0 mm work height max.: ca. 950 mm Number of working hours: 14.100 h total power requirement: 13.5 kW weight: 8500 kg range L-W-H: 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours () Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 Swiveling control panel, front left 2D graphic programming & product display Tool & program library - CNC-controlled axes: Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC ele ...
bore capacity in steel (diameter): 50,0 mm arm length: 320 - 1.220 mm workpiece height max.: 330 - 1.170 mm turning speeds: 25 - 2000 U/min spindle taper MT: 5 MK base plate: 1300 x 980 mm threading: 42 M quill stroke: 335 mm total power requirement: 4,0 kW weight of the machine ca.: 3000 kg. range L-W-H: 2035 x 1000 x 2830 mm Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK ...
weight max. in kg: 1250 kg turning speeds: 2,0 U/min height: max. 1.120 mm Torque: Tisch 490 Nm weight: 685 kg The Siegmund Roto-Positioner is ideal for welding, Assembly and maintenance work. The positioning takes place via a hydraulic one Turn and tilt function. The Siegmund Roto-Positioner is also included equipped with a continuously height-adjustable axis. Furnishing: - Hydraulic rotation of the clamping plate - Tilt range up to 95 ° - Hydraulic height adjustment and tilt function - including hand control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 127 mm clamping width: 0 - 208 in 3 Stufen mm clamping capacity: 4000 kg total power requirement: manuell kW weight of the machine ca.: 52 kg dimensions of the machine ca.: 670 x 151 ( L x H ) mm Furnishing: - hydraulic machine vice - Robust structure for milling, drilling and grinding - Vice body made of high quality cast iron - Guide surfaces hardened and ground - Jaws hardened, ground and exchangeable - Protected spindle - Booster system, little effort required, high pressure when clamping - Wide clamping range thanks to locking bolts with different hole spacings - With turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Radenska-Steinle / Germany Type: RP 20/125 Spray heads: 20 Bottles 0.50 + 1.00 L + 1.5 liters Complete V2A Running Direction: Left to Right Year of Make: 1996 With control cabinet Film available - Please request
max. workpiece diameter: 1000 mm min. workpiece diameter-at internal hobbing: 100-500 mm workpiece length - max.: 500 mm control: Siemens Sinumerik 840 D swing dia.: 1250 mm Workpiece spindle flange diameter: 520 mm work piece spindle speed range: 0-440 U/min weight of the machine ca.: 25 t dimensions of the machine ca.: 5100 x 3034 x 4500 mm Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation The data for this ad was cr ...
Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 171 kg,
Annpona Cutter PB 125-990, with Black Bowl, in Function
Table dimensions: 1250 x 750 mm Motor output: - kW Air consumption: - m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment8 ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U drilling capacity steel/cast iron: mm power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.
used
7 assen: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada-bombardement Capacity: 125 ton x 3100 mm Backgauge: CNC Control: Delem DA65R Passage between uprights: 2600 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Length: 3245 mm Depth: 1940 mm Height: 2415 mm Weight: 7,7 ton
Equipment consists out of: 1 - decoiler tower with 4 decoilers gt; capacity per decoiler: 3 ton
thickness of jaw: 125 mm tension force: 40 kN machine weight ab.: 40 kg range L-W-H: x x x mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GAMMAMECCANICA TANDEM SYSTEM 125 mm. 950 kg/h double screening, Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate only 0,30-0,40 Kwh/kg., Line suitable for the recycling for heavily printed, high humidity and contaminated materials., High performance degassing chamber for removal of up to 10 times more gas and humidity in the melted material compared to other systems (so you save on the cost of an agglomerator), The line includes :, Loading conveyor belt, tunnel metal detector, automatic compactor, N.2 Dosing unit for masterbatches and more, 1st extruder with 125 mm. screw Ø 28 L/D, 1st degassing point, FIMIC RAS 500 fully aumatic screenchanger, control cabinet, 2nd extruder with 140 mm. screw Ø 18 L/D, 2nd degassing point, BD-PLAST non-stop screen-changer, TDA6 GM water ring pelletizer, heat exchanging unit, vibrating screen, blower, Water treatment unit , ...
Kemper Spiral Mixer Type: SP 125 A Specifications: 2 Automatic timer switching on and off 2 speeds slow and fast with 3 stainless steel boilers Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All belts new Friction wheel new Wear parts all new Engine mounts all new New button Wheelchairs new Hydraulic oil new completely repainted
Modular vise, jaw width 125mm Gerardi Modular 125 Stable Machine Vise, Drill Vise Total length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Additional prism jaw Mechanical clamping actuation with 19mm wrench or ratchet The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".
used Forstner slitting line, control left, 0-line right, with motorized cross shear, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run was carried out. Working width: 250 - 1250 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 1.5 mm Colour: blue/yellow Total power requirement: 400 V Machine weight: 775 kg Dimensions: 1500 x 2200 x 1500 mm Coil weight: 2 t without straightening rollers Number of blades: 5 pairs Knife shaft diameter: 100 mm Speed: 25 m/min without bevel cut Coil width (max.): 1250 mm Maschinennummer/Machine number 102728 MST
Size: 800 x 1200 mm Equipments: Good condition without any damage Maximum stacking height: 1350 mm Minimum stacking height: 650 mm Platform width: 1250 mm
2 keer op voorraad nbsp; + geleiding Capacity: 125 kg
Stock 14R5-P / 1250 P - laminating machine year 2004 max. size 1,250 x 1,640 mm min. size 500 x 500 mm paper 100-400 gm2 Solid Board max. 350 g Corrugated board max. 7 mm in production good condition
: 1250 mm tank diameter / tank height: 1000 / 350 mm turning speed range: 920 / 1415 U/min voltage: 380 V volumn: 125 Liter power requirement: 1,9 kW weight of the machine ca.: 600 kg dimensions: 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Siemens Megalix CAT 125/15/40/80-121 GW Focal spot 0.3/0.6/1.0 Tube Housing Model No. 5764522 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 10144179 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - / Contact us at -
plate width: 125 mm plate thickness: 2 mm straightening feed: 5-30 m/min total power requirement: 1,5 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: m - Belt infeed height: 1,250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2450 h, with 3 hyd. Side brush, 3-cylinder diesel engine, high dump, sweeping width: 1.52 m, maximum theoretical sweeping capacity 30,500 sqm / h, 1810 kg net weight, dimensions approx. 2480 x 1440 x 2030 mm
MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears
1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.
1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 10.0 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, gas control section, Control cabinet with touch panel, feed water pump, ECO and the existing coarse and fine fittings.
maximum number of results exceeded
please refine your search
