suction used for sale

carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust support structure made of steel - Painted in RAL 2000 with a low weight - Galvanized longitudinal traverse with a length of 2,400 mm - 3x galvanized crossbars with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³ / h and an ultimate vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from t ...

The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. Dimensions: D = 2.50 m - L = approx. 10.70 m On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ventilation of the suction line), - 1 pc anti-vortex plate mounted on suction line, - 1 pc sign "Extinguishing water extraction point", - 1 pc vent pipe DN100 with hood, - 1 pc bearing tube with dipstick for measuring the level, - 1 pc dome lid with screws an ...

The container can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, rain retention tank, retention tank, retention tank, rainwater retention, rain storage tank, retention ecister, cistern, etc. Dimensions: D = 2.50 m - L = approx. 8.70 m The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ven ...

Extinguishing water tank Extinguishing water tank 100,000 litres steel tank, earth tank can be used as extinguishing water retaining tanks, Sports field irrigation, rain retention tanks, cisterns, etc. Factory new Dimensions: D = 2.90 m - L = approx. 16.00 m On request, the container can be fully equipped with a fire-fighting water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A, with Storz A-fixed coupling and Storz A-blind coupling, - 1 pc. vent pipe DN100 with stainless steel hood - V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Extinguishing water colle ...

Code: 0533 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 1/C 3000 - CE Standard Automatic wide belt sander with mobile head 3000 mm for wood, panels in general, plywood, truck beds, camper vans, caravans, prefabricated houses, shipbuilding, aeronautical industry, composite materials and various - CE Standard - Year 2005 Technical data: Working width mm 3000 Max working height mm 100 Min working height mm 2 Variable belt feed speed m/min 5/25 with inverter - Motor Kw 4 Calibrating/sanding steel roller - Diameter mm 400 - Belt development mm 2620 x 3050 - Motor Hp 50 (Kw 37) - Rpm 1465 Front and rear brackets for holding pieces Oscillating blowers for cleaning front and rear belt l/min 2000 Automatic head lifting Rotating blowers for cleaning output panels - 2 suction mouths diameter 160 mm Numerical control Syel for working group management Emergency safety bar Suc ...

-Exhibition machine- Machining length 3,200 mm (without additional support of the workpiece) Vertical machining center for drilling, milling and grooves. Highest flexibility and universal range of application with the smallest space requirement. Modern industrial design built from quality components with an optimal field of view of machining and perfect access to the tools. Machine frame in welded construction with ground and hardened prism guides Ball screws in X, Y and Z direction for precise positioning and for perfectly fitting workpieces. Workpiece-friendly clamping system by means of vacuum suction cup (2 x 80/80 and 2 x 80/40 mm) with automatic suction cup positioning. Extremely short set-up times. Workpiece fixation on the back allows machining of the entire circumference including horizontal drilling without additional reclamping (up to workpiece lengths of 1,500 mm). This guara ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

30,000 litre extinguishing water tank according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPRENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, Rain retention tanks, cisterns, etc. - Factory new - Dimensions: D = 2.00 m - L = approx. 10.00 m - weight approx. 6.2 to. With welded dome shaft approx. 800mm high, as well as a walk-in cover, galvanized + tagwaterproof. For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection. Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line ...

Code: 0242 Brand: GABBIANI Model: MODUL/80 Automatic double end tenoner for furniture, doors, kitchens, cabinets, window frames, panels, prefabricated houses, raised floors, composite materials, and various Max working width mm 3200 Min working width mm 150 Max working height mm 180 Operating units: 1° Upper blade unit - Motor Hp 3,2 - Rpm 2900 - Suction mouth diameter mm 120 2° Lower blade unit - Motor Hp 4,5 - Rpm 2850/5700 - Suction mouth diameter mm 120 3° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 4° Automatic spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 5° Spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 6° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 Feed speed variator Automatic shoulder opening with dis ...

Key data: 500

Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...

Suction slot duct system for passenger cars and trucks, exhaust extraction duct unit Npnfl Complete system with suction duct, trolley, suction hose, suction blower. Length approx. 20m, 3 suction hoses Aspirator

Vacuum lifting device, vacuum lifter Custom-made as handling device for an industrial robot Year of construction 2008 Payload approx. 60 kg Suction foot spacing min. 120 x 150 mm Suction foot distance max. 700 x 600 mm- 4 pieces Suction feet 100 mm- 4 pieces Vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces Cross member, adjustable in width via servo drive from 150-600 mm- Suction foot distance adjustable via 2 servo drives from 120-700 mm - Suction cup adjustment via 3 servomotors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very complex and precise design with linear guides and trapetz threaded spindles- Flange plate for suspension or flanging on the robot Length: 105 cm, width: 66 cm, height: 54 cm Net weight approx. 120 kg good condition ; used

CNC processing centre Brand: IMA Type: BIMA 310V 120/600 Year: 2004 Technical data: Machining area - in X-direction without gluing 6000 mm - in X-direction motor gluing 5000 mm - in Y-direction 1200 mm - in Y-direction with main spindle + WZ-Ø 20 mm 1300 mm max. clamping height from Upper edge of suction plate Z1 100 mm max. workpiece thickness Z 2 depending on equipment/application Worktable height: approx. 950 mm 1 main spindle with feed stroke pneum. - Drive power: 12 kW in S-1 operation - Tool holder: HSK F63, taper diameter =38 mm - Tool feed: automatic - Pull-in force: 11000 N - Tool weight: max. 6 kg - Direction of rotation: right/left rotation, programmable - Speed range: stepless 1500 - 24000 rpm, programmable - Drive: frequency-controlled three-phase motor Spindle lubrication: unique factory grease lubrication - spindle cooling: water cooling  ...

extinguishing water tank, storage tank, earth tank, irrigation tank, sports field irrigation, cistern, rain collection container with 100,000 litres capacity for the storage of service water / extinguishing water. Dimensions: D = 2.90 m - L = approx. 16.00 m The container has a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is provided with a bitumen coating / bitumen insulation on the outside. Slight insulating damage due to removal and transport may be present on the container. Price from Söhrewald - freely charged - For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 dome shaft made of glass-fibre reinforced plastic - GRP, complete with walk-in Steel plate cover - diameter = approx. 1.00 m, height = approx. 0.85m, - 1 pc. suction l ...

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

Technical data: - max. workpiece height 245 mm - min. workpiece height 50 mm - max. workpiece width 250 mm - min. workpiece width 50 mm - working height 900 mm sawing unit - motor 7.5 kW - speed 2900 rpm. - Cutting height 145 mm (170),(245) - Suction nozzle - saw blade FI 400 mm (450),(600),(750) Horizontal/vertical milling unit - 2 vertical spindles 2 x 7.5 kW - 2 horizontal spindles 2 x 7,5 kW - spindle FI 40 mm - speed of spindles 2850 rpm - max. tool FI 180, 230, 270 (330) mm - swivel-on protective arm - suction nozzle FI 200 mm drilling unit - motor 1.8 kW - Speed 1450 rpm. - Drill FI 12 - 35 mm - Drill length 220 - 320 mm - suction nozzle FI 150 mm forehead groove milling unit - motor 4.0 kW - spindle speed 2900 rpm - max. tool FI 230 mm - spindle FI 30 mm - suction nozzle FI 150 mm Inclusive - pneumatic tensioner - roller table and right - 1700 kg weight

MOBILE RAUCHSANLAGE With the LAS 250 suction and filter system, the air can be cleaned directly at the workplace. In this way, nuisances and harmful effects from unpleasant odours are avoided. Due to the high filter performance, up to 2 workstations can be equipped. Characteristics: Low noise level Adjustable volumetric flow controller High-performance fans with minimal energy consumption Recyclable filter with high capacity Easy operation, maintenance and filter change Two ways to suck out the contaminated air: suction arm with attachment or hose (must be ordered separately from the manufacturer) Suction flange: 2 pieces for suction hose, diameter 50 mm Durable, brushless electric motor Throughput: 250 m3/h (8,829 ft3/h) Power: 0.37 kW (0.5 hp) Manufacturer: LOCTITE Type: LAS 250 All information without guarantee

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Ship unloading system TA 12/15 FA 38 of the manufacturer NEUERO Engelbrecht + Lemmerbrock GmbH & Co., Melle. Built in 1988 It is a pneumatic suction system for the extraction and conveyance of grain or similar pneumatically conveyable bulk materials from ships. Via a telescopic swivel arm and a suction nozzle, the material to be conveyed is sucked in by the air flow generated by the blower and conveyed into the suction separator. There, the material to be conveyed is separated from the suction air flow and discharged via the rotary valve. All motion drives of the telescopic boom are hydraulic. Electrical connection: 380 V Technical documentation of the manufacturer and various invoices for replacement parts available. A magnetic separator was retrofitted. The rotary valve was replaced in 2018 (EUR 8,875) and has not been used much since then. New filters available.  ...

Thickness planers Back to overview - Print version WEIBERT WY-D41 Thickness planer WEIBERT WJ-D41 NEW MACHINE! 400V 4 KW (5,5 HP) n=4500 min Planing width of 406mm Planing shaft diameter 100mm Max.4mm Chip Removal 4-reversible blade shaft Passage height of 4-225mm Feed speed of 6 and 12m/min.with own engine 1.1 KW (1.5 hp) Suction connection of 120mm Machine weight of 370 kg Machine tables Planing shaft bearing block and table guide made of GREY CAST IRON Manual height adjustment with handwheel 2 rolls in the thickness table G&WJ-D41 relka 22 Request information material WEIBERT WY-D53 Thickness planer WEIBERT WJ-D53 NEW MACHINE! 400V 5.5 KW (7.5 HP) n=5000min Planing width of 530mm max.chip removal of 8mm Planing shaft D=125mm 4-reversible blade shaft Passage height of 3-300mm Feed speed of 8 and 16 m/min. Engine for feed 1.5 KW (2 hp) Sucti ...

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

belt width: 150mm; belt length: 3000mm; table size: 960mm x 350mm; table for rounds: 330mm x 330mm; veneer grinding unit: ja; oszillation: ja; grinding unit tiltable: ja 90° - 45°; suction connection: 120mm; motor power: 3 kW; machine length: 1910mm; machine width: 840mm; weight: 330kg; properties Heavy machine stand in torsion and vibration-free design, extremely stable Grooved feed ruler, ideal for grinding veneer supernatants Double-sided suction connection 80/100 mm for optimum chip removal Oscillating sanding belt ensures a high removal rate and a clean sanding pattern Maintenance-free grinding belt oscillation with separate gearmotor, optionally switchable Height-adjustable sanding table for utilization of the entire sanding belt Standard veneer edging device with fine adjustment Fast conversion from veneer to solid wood sanding possible Height adjustment of the  ...

through-put width: 580 mm working heigth: 580 mm air consumption: 400 - 800 l/min working pressure: 3,4 - 8,0 bar suction capacity: 17,4 m³/h total power requirement: 1,2 kW weight of the machine ca.: 115 kg dimensions of the machine ca.: 1225 x 935 x 1640 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the b ...

through-put width: 870 mm working heigth: 850 mm air consumption: 400 - 800 l/min working pressure: 3,4 - 8,0 bar suction capacity: 17,4 m³/h total power requirement: 1,2 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 1320 x 1200 x 1760 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the  ...

Vacuum lifters, vacuum lifters from Schmalz for heavy plates, sheets, etc. Load capacity 300kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees by motor 10 suction cups 370 x 85mm, suction cups partially removable Minimum dimensions of the suction cups: 1250 x 760mm Maximum size of the suction cups: 1900 x 1200mm Acoustic warning signal when the vacuum is too low 400V, 0,37kW Vacuum pump approx.8m³/h Pressure gauge to indicate negative pressure Can be attached to on-site chain hoist Swivelling and snap-in control lever, which means that parts can also be stacked very high With crane bottle holder CE mark No test book available Paint bursts reworked The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Suction Fuchs MKF 105FS, used, Year of construction 06/2005, suction capacity 270 m³, cleaned, tested, new filters (filter bags, filter mat, HEPA and activated carbon filters) Status display, control via interface and on/off via switch 3 phases 16 A CEE plug Optional: suction hose (length as required), connection sleeves, suction nozzles Delivery EXW, pick-up possible,

Band width: 150mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Abrasive roller diameter: 60mm/100mm/120mm; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 310kg; Grinding unit can be swivelled up to 45Â via lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working. Oscillating sanding belt with separate geared motor for better sanding results oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilising the entire abrasive belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt le ...

Band width: 150mm; Band length: 2270mm; Veneer grinding device: no; Oscillation: yes; Roll diameter: 38mm, 50mm, 76mm; Swivel grinding unit: yes / 90Â - 0Â; Work table: 680mm x 310mm; Additional table: 260 x 260 mm; Belt speed : 16 m/sec. m/sec.; Suction port: 100mm x 2; Motor power: 1.5kW/400V; Machine length: 1350 mm; Machine width: 585 mm; Weight: 162 kg; Infinitely angle-adjustable sanding unit (0 - 90Â) for vertical and horizontal sanding Oscillating sanding belt for better sanding results and a longer service life of the sanding belt Quick and easy sanding belt change via quick-clamping system abrasive sole with graphite coating as standard for a longer service life of the sanding belt Height-adjustable robust work table made of grey cast iron with T-slot, supported by spring bearing Smooth adjustment of the table height by means of gas pressure springs Incl. late ...

Working width: 410 mm; Planer shaft: Tersa knife; Number of knives: 4; dressing table length: 2000 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Display of planer thickness: mech. Counter; Feed speed: 6 / 12 m/min; Feed roller: steel; Pull-out roller: steel; Pressure bar: Yes; Table rollers: no; Motor power: 5 kW; Engine braking: yes, automatic; Suction connection: 120mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 430kg; TERSA planer knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and uniform material feed material feed with two speeds Numerical display for thickness table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Work tables ar ...

General SKULU005 LocationNetherlands MakeHerbold Main Features Motor110 KW Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel Information With control cabinetcheck Floor space10,9x7,3 m Total height7,3 m CEcheck Extra SpecificationsThe system comprises a range of specialized machinery tailored for plastic processing and material separation: 1. Granulator (Type SMS 45/60-H5-3): This machine is equipped with a cutting chamber, rotor, and high-quality blades for size reduction. It also includes an extraction system for efficient operation. 2. Air Separation Unit (Type SZS2 450/150): Featuring an air stream separator and adjustable air flow, this unit efficiently separates light materials. It is complemented by a rotatory lock and a suction unit for enhanced performance. 3. Buffer Bunker with Screw: Serving as a material buffer, this component has indicat ...

Second-hand wide belt sanding machine Make Heesemann Type MFA Impression not rebuilt - without guarantee Year of construction 2010 Technical specifications: Sanding width 1,350 mm - cross sanding unit with pressure lamellar belt system - combined longitudinal sanding unit with calibration roll - longitudinal sanding unit - structuring brushing unit - dust removal brushing unit - 3 pressure beams with computer-controlled selective pressure control system CSD Distance of the control rollers 21 mm Feed speed: 3 - 15 m/min. Working height constant 880 mm motorized adjustment to the workpiece thickness 3 - 150 mm 1 pressure roller Ø 50 mm swinging, in the infeed of the machine including workpiece oversize control Roller table in the infeed of the machine 1 industrial PC 10.4 with program memory for 100 programs 1 cross sanding unit Abrasive belt ...

OPERATING POSITION... HORIZONTAL PUMP SET SIZE . 90.1 CONSERVATION SILICONE OIL ROTOR . . . . . . . . . . . . . 1.2436 U80 STATOR . . . . . . . . . . . . . NBR-LM 778/60-ST MOUNT RINGS... 1.4571 TENSION ROD MATERIAL... 1.4301 JOINT MATERIAL... . V4A JOINT DESIGN... . CARDAN (PW) ABGEDIC. CUFF... NBR TISSUE JOINT OIL... White oil EXTRA SHAFT SEAL... SPECIAL VERSION SUCTION CASING... V4A SUCTION... DN100/PN16-V2A SUCTION LOCATION TOP GASKET... NBR OUTLET... . DN100/PN16-V2A DRIVE flange [mm]... 250 Drive shaft [mm] 40 SHAFT MATERIAL... V2A LINEUP SPECIAL VERSION PUMP PROTECTION... WITHOUT ROTATION LINKS PUMP IDENTIFICATION... CHEEKS NAMEPLATE... STANDARD SURFACE PROTECTION... STANDARD C1 FARBE . . . . . . . . . . . . . RAL 9006 WEIßALU DRIVE... STIRNRADGETR.MOTOR DRIVE GEARBOX TYPE SEW RF77 ENGINE TYPE... DRE100LC4 PERFORMANCE... 3.0 KW SPEED at 50 Hz [ ...

to the storage of custom water / fire-fighting water. the container is used, emptied inside and cleaned expertly. he owns a manhole DN 600 with cathedral lid, two angschweisste feet and will provide outside completely with a new bitumen painting. L = approx. 10.70 m / D = 2.50 m / weight approx. 9.0 to. / ex works, freely charged. for the use as a fire-fighting water tank konnen we the container completely equip with a fire brigade suction connection, consisting of: -1 Stck. Suction management with A-firm coupling to German Institute for Standardization 14319 with special fastener for Feuerwehr-Dreikantschluessel - 1 Stck. Bleeder tube with bonnet - 1 Stck. Bearing pipe with bearing stick for measurement of the filling state - 1 Stck. Cathedral lid with screws and poetry. the suction management can be used as a filling and withdrawal pipe. the components are prep ...

For CNC plasma and cutting cutting systems 1 stueck Sideros suction system type ECO 4 HC, max. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Cutting of steel and stainless steel sheets. suction and filter system with integrated fan, automatic, dust-duty -cleaner filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,000 m3/h and a maximum of 2,500 Pa. filter class M at a separation degree of > 99.9% (BIA use category U,S,G,C). dimensions: Height: 2,100 mm depth: 1,413 mm Width: 1,413 mm Weight: 620 kg Air entry: NW 200 - 250 mm Price 6,990.00 EUR (price + VAT ex works, excluding pipelines, installation and commissioning);  ...

Technical data: hydraulic undertable circular saw unit - drive power motor 7.5 kW- diameter saw blade Z=48x5 600 mm- diameter saw blade bore 30 mm- inclined working table Yes- Automatic rotation of the table -70C 0C+70C- Speed of rotation from / to 0C / 70 C 3s- Positioning accuracy +/- 0.2C- Pneumatic workpiece holder 2 pieces- Pneumatic side organizers 2 pieces- Safety cover via capping unit Yes- Cutting capacity at 0C: 160 x 310 mm, 80 x 390 mm- cutting capacity at 45C: 160 x 220 mm, 80 x 270 mm cutting capacity at 70C: 160 x 90 mm, 80 x 130 mm- minimum workpiece thickness 10 mm connection values - supply voltage 400 V / 50 Hz- Control voltage 24 V compressed air requirement at 8 bar per cycle approx. 8 Nl- Suction nozzle FI100 mm 2 pieces- Suction nozzle FI160 mm 1 piece- air speed Suction in center of nozzle approx. 25-35 m/s Electronically controlled slider:- Loading length: 6000 m ...

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

New device incl.pre and combined filters The compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - Dimensions 1197 x 600 x 790mm - Suction capacity 1250m³ / hour -400v ph 50/60Hz with red 16A CE plug - Hose connection 125mm Ø - incl. option external start / stop ( with 24V DC via 2-wire cable on the back side ) to activate via micro switch - Warranty 12 months ( filter excluded ) Typical applications : Marking laser Engraving laser Cutting lasers Options: - Suction hose in the necessary length - Connection sleeves - Suction nozzles

Suction AD-Oracle IQ from Bofa - New : The IQ control keeps the set air flow the same during runtime. Optional: In stainless steel, , hose set, VOC, filter change signal, start/ stop via external 24V - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) - Weight 68 kg - Noise level less than 60 dBA Options: - Suction hose in the necessary length - Connection sleeves - various suction nozzles Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding fumes

Hydraulic gripper for wooden beams with modular suction cups Load capacity kg: 700 Number of suction cups: 16 Dimensions of suction plate mm: 80 x 750 Procedure mm: 8000

VakkuCar3 Bench Planer Modern mobile workstation with vacuum clamping device and height adjustment. Make your workplace on your workpiece. Vacuum flat suction; d = 190 mm Flat suction pad 250 mm x 80 mm Flat suction 240 mm x 45 mm built-in socket for auxiliary equipment Size 1800 x 800 mm Height-adjustable 874-1074 mm G & FE-VAKUUCAR-3 Extras: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

– after technical inspection – very good condition – the ability to lay several stacks in one cycle TECHNICAL PARAMETERS: length of elements 3000 mm width of elements 1300 mm height of elements 1600 mm centering the element number of suction cups 20 pieces vacuum pump 1.1 kW lifting capacity 450 kg hydraulic material lifting pump motor 1.5 kW arm motor 1.8 kW number of cycles 12/min number of receiving rollers 48 height of rollers from the ground 280 mm adjustable suction cup spacing maximum spacing of suction cups 3000 x 700 mm Roll table from stapling: – width of rollers 1000 mm, – length 3750 mm, – slanted rollers, – number of rolls 31, – engine power 1 kW, – adjustable speed. Cross table from stacking: – length 320 cm, – width of rolls 110 cm, – total length of transverse belts 197 cm, – electrically adjusta ...

1 new funnel hacker DH 800 - 30 KW Rotor width 800 mm Rotor diameter 400 mm Number of knives 46 / concave sanded / quadruple rotatable Engine power 30 kW Electrics 400 V , 50 Hz Control control cabinet, blower cooled, with SIEMENS PLC Funnel opening 800 x 1300 mm (option: 1300 x 1750 mm) Funnel volume approx. 1.16 m3 (with hopper extension approx. 1.7 m3) Sieve as desired, 10 - 50mm Hydraulic 60 litre tank, external gear pump, oil cooler optional Dimensions ( LxWxH ) 2620 x 1738 x 1830 mm Weight approx. 3400 Kg (with hopper extension approx. 3550 Kg) Throughput capacity approx. 3 - 5 m3 per hour, depending on material and sieve Suction nozzle 200 mm, can be used on both sides Suction capacity at least 28m/sec. on suction nozzles

3 MONTHS WARRANTY offer consists of: - air suction collator VAC-100m Horizon VAC-100m air-suction collator - technology: touch & work - Model: Air-suction collator - bins: 10 - error avoidance: misfeed-,doublefeed- and jamming control - saveable jobs: 9 memories for repeat orders - extensibility: up to 6 collators (60 bins) programs: - Doublecycle (nonstop-work) - inject (simply and doubly) - Booklet Making Program - Block Program - selective collating - sheet size: max. 500x350mm; min. 148x120mm - paper weight: 40-250g/sqm - Production speed: max. 9,500 cycles/h - loading height: 55mm/ bin - power: 230V; 50/60Hz - 1,86kW - Dimension: 842x652x1.961mm - weight: each 310kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Sell a mobile suction system. Well suited for double grinding brackets, tool grinding machines Suction comes from a laboratory workshop and came for sale because of the site closure Dimensions 660mm680mm1900mm High top suction pipe Weight150Kg Ffirn32r Extraction capacity 1250m3/h Energy demand 1.1Kw

Open spray level 2x2.1x2.2 The overspray in powdering is absorbed via the suction unit. The powder spray stand is delivered on rollers and is thus mobile. - The suction is equipped with a 60 L powder container (rollbar). - The first stage is 4 filters in the suction system. - Above the cabin is the Absolute filter. 1. Dimensions of the powder level width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m3/h Electric motor 3.0 kW 3. Filter 325x600 4 pcs. Type Filter cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type pocket filter

AFS 4000 Air Purify AFS 4000 Air Purify all separation and filter elements as well as with connection for cooling lubricant recirculation Air capacity:4,000 m3/h Device suction capacity Rated electrical data: 3, 380...480 V, 50/60 Hz2.68 kW, 4.1 A, Power consumption:2.2kW, operating point Weight:approx. 150kg Dimensions 800mm wide 1800mm long incl intake nozzle1050mm high Suction mares 4 pieces each approx. 200mm diameter Suction nozzle shut-off valve diameter 150mm

Suction nozzle diameter: 350mm; maximum flow rate: 8000 m³/h; Nominal flow rate: 6927 m³/h; Vacuum: 2600 Pa at 21.4 m/s in dusted condition; Volume flow monitoring: pressure differential indicator; Filter area: 31.8 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 72 db; Chip bag volume: 640 l; Filter cleaning: mororic; Engine power: 11 kW; Extinguishing device: yes; Machine length: 4165 mm ; Machine width: 1270 mm; Machine height: 2595 mm; Weight: 900 kg; The Riedex vacuum extractors have been developed for the extraction of wood chips, wood dust and related substances, but also for various plastics, dry aluminium chips and paper dust. When using chip bins: An even filling of the dust bins cannot be guaranteed for procedural reasons. Technical data DM-350/M-B or P-B Motor power: 11.0 kW or 15.0 kW (see additional price) Nominal flow rate 20 m/ ...

Band width: 150mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 810mm; Weight: 290kg; Heavy-duty machine stand guarantees high torsional rigidity and vibration-free working Better sanding results due to sanding belt oscillation via separate geared motor oscillation optionally switchable veneer edge sanding device with fine adjustment as standard Grooved infeed ruler for sanding veneer protrusions Quick changeover from veneer to solid wood pulp Height-adjustable sanding table for the utilization of the entire sanding belt width Height adjustment of the sanding table and sanding unit swivel via handwheels Height-adjustable additional table with suction for grinding radii Optimum chip r ...

Band width: 200mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 310kg; Grinding unit can be swivelled up to 45Â via lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working. Oscillating sanding belt with separate geared motor for better sanding results oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilising the entire abrasive belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extenda ...

Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Pos.2 Gantry stacking system Pos.3 Parcel roller conveyors in the area of gantry systems Pos.4 Security technology Pos.5 Machine control Pos.6 Intermediate strip automatic The mechanization is designed for the following workpiece dimensions: Length: 320 - 1000 mm Width: 56 - 120 mm Thickness: 20 - 40 mm Stack Dimensions: Length: 400 - 1000 mm (double lengths up to 2 x 520mm) Width up to: 1200 mm Height up to: 1200 mm Stacking is carried out on Euro pallets Max. output: max 40 parts/min or max 4 layers/min (board or batten layer!) Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Quantity: 4 pieces Length: 2600 mm each Usable width: 800 mm each Propulsion: Spur gear motor Conveying speed: 15 m/min Incl. side guide rulers and layer alignment (One layer is formed,  ...