We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,574 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: • Suction system with bag filter unit • Extractor fan with 7.50 KW-1455 rpm motor • Upper filtration part with bag filters Approx. Onsite Dimension. (l x w x h): 5,100 x 1,500 x 4,800 mm, weight approx.: 2,000 kg
used
Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used
used
Recon Part number: 1227 7624 / 1227 5580 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
Technical data: Application: Laser, plasma and autogen cutting, grinding and welding materials: steel and stainless steel sheets, dry and oil-free cartridges / electric valves: 6 / 6 Nominal volume flow: 3,600 m3/h (at cartridge load of 600 m3/h) Filter area: 84 m2 (21 m2 per cartridge) Dustcollection of Air input diameter: 300 mm Air outlet diameter: 350 mm air temperature/humidity: < 60 C / < 50 % Total oil concentration: 3 mg/m3 compressed air: at least 6-7 bar on Feed-in point, dry and oil-free compressed air consumption: max. 18 Nm3/h - x 50 NLiter s per pulse with max. 6 per minute Filter level: 99.99% Dust emission: < 1 mg/m3 control cabinet: 400 V, 3 phases, 50/60 Hz Control unit: 24 VAC, 50 Hz Geraeusch Level: < 73 dBA x 2 dBA plus pulse surcharge of < 10 dBA x 2 dBA Color: RAL 5015 Width x Depth: 1,305 x 1,382 mm Weight: 640 kg Engine: 7.5 kW 13.2 A 32 A 4.234 Pa ...
used
Technical data: Application: Laser, plasma and oxy-fuel cutting, grinding & welding Materials: Steel and stainless steel sheets, dry and oil-free Cartridges / solenoid valves: 6 / 6 Nominal volume flow: 3,600 m 3 /h (with cartridge load of 600 m³/h) Filter area: 84 m² (21 m² per cartridge) Dust collecting container Air input diameter: 300 mm air outlet diameter: 350 mm Air temperature/humidity: < 60 ° C / < 50% Permissible concentration of oil: 3 mg / m ³ Compressed air: min. 6-7 bar at the feed point, dry and oil-free Compressed air consumption: Max 18 nm ³/h - ± 50 NLiter per pulse with max 6 per minute Filtration degree: 99.99% Dust emissions: < 1 mg / m ³ Cabinet: 400 V, 3-phase, 50/60 Hz Control unit: 24 VAC, 50 Hz Noise level: < 73 dBA ± 2 dBA plus pulse charge of < 10 dBA ± 2 dBA Colour: RAL 5015 width x depth: 1.305 x 1.382 mm Weight: 640 ...
used
TEKA filter system ZPF 9 H 3,500 PA 11 KW 8,000 m3 / h good condition; ready to go
used
A used fan is sold: Rippert RV80 - 800-765-B5 Year 2007 (2017 overhauled) 27000m ³/h Booster 1262PA
used
used
Extractor fan 4 Fagida MD Year of manufacture 2002 L x W x H: 80 x 60 x 80 cm Weight approx. 120 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Exhaust fan Tube ø 350 mm Fan ø ± 750 mm Engine 11 kW Built in 1995 Weight approx. 190 kg L x W x H: 100 x 80 x 100 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Dimensions (L/W/H): ca. 700 x 500 x 1.080 mm current intensivity: 0,73 / 0,42 A weight: ca. 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location
new
Extraction Fuchs TKFVA103 (filter in OEM quality) MA-105895-E Filter Activated Carbon TKFVA103 MA-105896-E Filter Cartridge FIPA
used
Description blower for material: power: 1.3 kW power supply: 400 V rpm: 2850 g / min
used
Description SB Plastic three-phase power supply without container Blowing Power: 0.75 kw Voltage: 380V
used
Description Piovan container without blower Container Capacity: 2 lt
used
used
weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm
used
Volume flow: 1000m³/h, max. depression: 10,000Pa, motor power: 5.5kW, weight: 350kg.
used
Pressure: 2596Pa, density: 1.2kg/m³, rotational speed: 2880/min, operational temperature: 20-80°C, weight: 105kg.
used
Rotational speed: 2850/min, connected load: 11kW, machine is unused since 2018 and fully functional.
used
– after technical inspection – year of manufacture 2017 – ATEX marking TECHNICAL PARAMETERS: fan power 15 kW flow rate 8000 m3/h compression 4603 Pa vibrating system for self-cleaning filter bags 2 x 0.12 kW Connection diameter 300 mm dimensions (length / width / height) 490 / 125 / 360 cm SET OF PIPES INCLUDED: – 6 pieces diameter 300 mm length 1250 mm – 2 pieces knee 90° – pipe set with tee diameter 250 mm, length 1400 mm – tee 300 mm by 2 x 250 mm – knee 45° – knee 15°
used
Specifications: Nominal capacity 5.089 m³/h Negative pressure 2,760 Pa (at V nominal. at the interface) Nozzle Ø 300 mm Filter area 32 m² Filter material BGIA (AWN16) H3 and GS tested Filter regeneration pneumatic (compressed air connection required on site) Motor power 7.5 kW Engine speed 2,890 rpm Sound pressure level 74 dB(A) Connection data: 400V, 50 Hz, 15.0A Dimensions: 3,650 x 1,540 x 2,570 mm Weight: 967 kg
used
for 25 hp tractors ,normal PTO 540 rpm ,instruction manual , replacement catalog ,
used
Nordfab NFRP-Filter 2000 5+1 hjLR. See Appendix for details. Dismantling and loading possible.
used
- Motor 11 kW - Connection DM. 300 mm - Start-up control Available from January 2024!
used
Reference Num.: 3551 Brand: Rosenberg Type: Airbox A20-07 Available: directly Status: In production Location: Deutschland Equipment: - Luftmenge: 600 m³/h
used
used blower, Herbold MFT 8/280 Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.
used
used blower, Herbold MFT 55/500 11kW Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.
used
used blower, Reitz MXE 160-003130-00 22kW as good as new Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.
used
Description: INDUSTAR air recycling systems, type: 1N80A2, volt 220V weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 700 x 800 mm
used
Key data: 250 mm, 4 kW, 4060 m³/h
arke: Holtrop Jansma Clean Air Extraction Type: MSO 250 Year of construction: 2016 M-No.: W0056730S Clean air extraction: MSO 250 with flame protection device Intake support: ø250 mm Length: 2,250 mm Width: 1,230 mm Height: 2,840 mm Weight: 600 kg Capacity: 4,060 m3 /hour Pressure: 1,900 Pa Power supply: 4.0 kW, 380V, 9 Amp Filter surface: 27 m2 Filter bags: 30 pcs. Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Noise: dB(A) Flame protection system: automatic fire extinguisher with powder extinguishing agent, automatic slider in the return air duct, automatic electrical shutdown of the extraction (New powder fire extinguisher witrd assembled before delivery) Scope of delivery: filter system, with built-in intake fan, control cabinet, automatic fire extinguishing installation with flame protection damper
used
Key data: 160 mm, 3 kW, 2050 m³/h
Brand: Höcker Polytechnik Type: VacuMobil EA 160A Intake manifolds: ø160 mm Length: 1,300 mm Width: 900 mm Height: 1,900 mm Capacity: 2050 m³/h Pressure: 2,580 Pa Motor: 3kW Cleaning: included Filter area: 9.2m2
used
Centrifugal fan REITZ type MAE 045-017030-00 Fabr. No. 601438 Year of construction 2017 Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³ Air inlet 300 mm (nozzle diameter in base plate) Air outlet 345 x 345 mm Engine speed 2940 rpm. Motor power 18.5 kW Mains connection 400 Volt 50 Hz - Fan impeller with 8 fan blades - directly flanged drive motor - flange dimension for air outlet 450 x 450 mm - stable metal housing made of 8 mm steel Space requirement L x W x H 1930 x 1240 x 950 mm Weight centrifugal fan 500 kg very good condition, only test run completed; used
used
Centrifugal fan REITZ Type: MAE 031-007130-00 Fabr. No. 601475 Year of construction 2017 Volume flow 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³ Air inlet 250 mm (nozzle diameter in the base plate) Air outlet 245 x 195 mm Engine speed 2915 rpm. Motor power 7.5 kW Mains connection 400 Volt 50 Hz - Fan impeller with 9 fan blades - directly flanged drive motor - flange dimension for air outlet 310 x 260 mm - stable metal housing made of 5 and 6 mm steel Space requirement L x W x H 1390 x 1030 x 600 mm Weight centrifugal fan 200 kg very good condition, only test run completed; used
used
Description: bearing load 150 kg - 4 roller protectors Approx. Onsite Dimension. (l x w x h): 600 x 270 x 200 mm, weight approx.: 15 kg
used
Article number: 27-06-184 Manufacturer: Cutting machine Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 1000x1400x1200mm Weight: approx. 300kg Cutting machine for round parts for distortion-free face cutting Cutting width: approx. 220mm Cut-off wheel diameter: approx. 300mm diamond Jaw chuck speed: approx. 150 rpm Accessories Diamond Wheel 3 jaw chucks Ø 250mm + 2 jaw sets Mobile extraction ( Höcker Polytechnik ) Other accessories on request Price and other technical data on request
used
Description: device number: 090113 max. permissible operating pressure: 10 bar voltage 380 V Approx. Onsite Dimension. (l x w x h): 1,500 x 1,100 x 1,800 mm, weight approx.: 190 kg
used
Description: SUBMERSIBLE SLURP PUMP, IP55, 2.6KW, 3000 1/MIN, 220-240/380-420V 50HZ, FLOW RATE 600 L/MIN AT 12.0M, DELIVERY HEIGHT, SUPPLY DEPTH 570MM, PIPE CONNECTION G 2 1/2, MAX. SOUND PRESSURE LEVEL 76 DB (A), WITH HARTING PLUG-IN CONNECTOR: 10-PIN DESINA, TAL901/570-MVX+227. Used in milling or grinding machines to pump around the cooling oil. Approx. Onsite Dimension. (l x w x h): 1,400 x 1,400 x 1,300 mm, weight approx.: 100 kg
new
- ITM Suction Tunnel - HP Part Number CA245-19151 - for HP Indigo Series 2 Machines
new
- Outlet ITM Hood Suction - HP Part Number CA254-00072 - for HP Indigo Series 2 Machines
new
- SP EBV Suction Blower - HP Part Number CT397-02900 - for HP Indigo Series 3 Machines
used
CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...
new
carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...
new
carrying capacity: 250 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...
new
carrying capacity: 500 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...
new
Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...
new
40,000 litres of earth tank for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 8,70m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and A-deck capsule according to DIN 1 ...
new
60,000 litres of earth tank - new from the factory - single-walled - for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 1 ...
new
80,000 litres of earth tank - brand new - single-walled - for storage of rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,90m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and ...