suction used for sale

Description Three-phase suction unit with receiver Aspratore Moretto: V1 S40 Voltage: 400 V Power: 1.1 kW Production: 180 Kg/h Container: Moretto C10 F40 Capacity: 10 L

Description Three-phase suction unit Voltage: 400V Power: 5.5 kW Vacuum: 44 kPa (440 mbar)

Description Three-phase suction unit with receiver Voltage: 400V Power: 1.3 kW Capacity: 7 litres Production: 100-200 Kg/h new cleaning valve

Description Single-phase Suction Unit Voltage: 220V Power: 1Kw Capacity: 25 litres

Description Pneumatic Suction Unit (venturi) Voltage: 220V Power: 50W Capacity: 2 L

Description Single-phase Suction Unit Voltage: 220V Power: 1.4 Kw Capacity: 3 l

Description Three-phase Suction Unit with C10C container Voltage: 400V Power: 0.75 Kw Container capacity: 10 Lt

Description Single-phase Suction Unit Voltage: 230V Power: 1 Kw Capacity: 20 dm3

Description Moretto Three-Phase Suction Unit without Three-phase Container - Aspirated Unit V30S50 Hourly Production: 300 Kg / h Installed Power: 3 kw - DUO valve model VDD50F50 Number of users: 2 - FC 25 filter

Description Piovan F 41 Three-Phase Suction Unit without Container Voltage: 380V Power: 0.75 Kw

Metal suction hose Flexible d=130mm Clutch 160x130mm Length 4200mm G&-4949

There are two identical suction units available, volume flow: 7310m³/h, pipe diameter: 300mm, pressure increase: 2700Pa, rotational speed: 3000/min, length: 2000mm, width: 1300mm, height: 4500mm.

Verhagen Industrie Staubsäuger (construction site) Type: Comzu F3313 B3 VLSFF313003-B3 Electrical: 380V or 220V Motor: 3 1.1 KW Construction: container stainless steel, heavy duty frame for construction site with wheels and protective cover Capacity: 628 m3/uur Vacuum: 220 mBar Cleaning: Mechanical Container: 45 liters Suction supports: ø90 mm Filter surface: 0.85 m2, Teflon IP44 Noise: < 70 dBa Wheels: 2 rubber Dimensions (L W H): Weight: 68 kg Condition: Fully functional Option: Auto start-stop link with processing machine 220V/380V

Suction nozzle diameter: 260mm; Nominal flow rate: 7700 m³/h; Bag volume: 2 x 290 l; Filter cleaning: manual; Engine power: 4.8 kW; Dimensions: 1900 x 670 x 2800 mm (L x W x H); Weight: 88 kg; For milling, planing and sawdust (not suitable for dust) 180Â rotatable extraction unit allows extraction from below or above Stable fan wheel made of metal Standard with high-quality chassis for better stability and easy manoeuvring quick-release locks for filter and chip bag fine filter bag double-woven

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal flow rate: 1900 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; For milling, planing and sawdust (not suitable for dust) 180Â rotatable extraction unit allows extraction from below or above Stable fan wheel made of metal Standard with high-quality chassis for better stability and easy manoeuvring quick-release fasteners for filter and chip bag fine filter bag double-woven

Extraction, dust extractor DUST COLLECTORS PULSNITZ Sto 5 / 125-1 Flow rate: 400 m3/h vacuum: max. 1250 Pa ( 0,0,0125 bar ) Density: 1.2 kg/m3 Operating temperature: max. 50 °C Suction connection ( inner diameter ): Ø 70 mm Motor: IM B5-71x0.37x3000 0,37 kW 2850 rpm 220 / 380 V 3AC used, checked! Dimensions: 550 x 550 x 1130 mm

Vacuum suction nozzle FESTO VAK-1/4 6890 Operating pressure: 1.5 - 10 bar used, tested ! Dimensions: 140 x 50 x 15 mm

Vacuum suction nozzle FESTO VN-10-L-T3-PQ2-VQ2-RO1-B 532641 Series F343 Operating pressure: 2 - 8 bar New ! Dimensions: 140 x 50 x 15 mm Dimensions (packaging): 110 x 55 x 45 mm

Suction Strainer BALTIMORE AIRCOIL 5C3154MG Cooling Tower Series 1500 Type TXV 292R New ! Dimensions: 2360 x 133 x 22 mm

Suction valve, ring lamellar valve, compressor spare part PAGUS Ø 205 / 217 / 211 mm Height without screw: 55 mm New ! Dimensions: 220 x 220 x 115mm

Suction valve, ring lamella valve, compressor spare part PAGUS Ø 225 / 235 / 248 mm height without screw: 64 mm New ! Dimensions: 250 x 250 x 100 mm

Suction valve, ring lamellar valve, compressor spare part PAGUS Ø 185 / 197 / 185 mm height without screw: 55 mm New ! Dimensions: 200 x 200 x 115 mm

Suction air boiler PROMINENT Part No.: 243591 Content: 0,,5 l System pressure: max. 4 / 2.5 / 1.0 bar Max. permissible vacuum: 300 mbar absolute at temperature: 0 - 20 / 40 / 60 °C connection: DN15, DN10 Material: PVC / Viton used, tested ! Dimensions: 310 x 73 x 73 mm

Sauglanze PAGUS 900 mm Material: PVC Immersion depth: 900 mm connection thread : 1 1/4 ( inches ), inner diameter: Ø 20 mm thread for fastening: 2 ( inches ), length: 25 mm 2x level switch: 0 - 300 mm foot valve diameter: Ø 32 mm New ! Dimensions ( suction lance ): 1040 x 120 x 115 mm

Suction valve, ring lamellar valve, compressor spare part PAGUS Ø 165 / 178 / 165 mm height without screw: 53 mm New ! Dimensions: 180 x 180 x 110 mm

Suction and blower hose, spiral hose PAGUS Ø 100 mm x 5 m Inner diameter: Ø 100 mm ( spiral stretched ) outer diameter: Ø 116 mm ( spiral compressed ) Length: 5 m ( unloaded ) As good as new ! Dimensions ( packaging ): 800 x 400 x 400 mm

Suction and blower hose, spiral hose PAGUS Ø 160 mm x 9.3 m inner diameter: Ø 160 mm (spiral stretched ) outer diameter: Ø 170 mm (spiral compressed) length: 9.3 m ( unloaded ) as good as new ! Dimensions ( packaging ): 1200 x 800 x 400 mm

Suction valve, ring lamellar valve, compressor spare part PAGUS Ø 130 / 144 / 130 mm Height without screw: 58 mm New ! Dimensions: 145 x 145 x 95 mm

Suction control valve, control valve, normally closed, pneumatically controlled HOERBIGER HDKG160 23-561582-1200 Control cylinder: ZAED40 2323 -559795 Pipe inner diameter (inlet): 160 mm Pipe outer diameter (inlet): 200 mm Pipe inner diameter (outlet): 200 mm Flange diameter (outlet): Ø 380 mm New ! Dimensions: 560 x 440 x 380 mm

Suction valve, ring lamellar valve, compressor spare part GARDNER - DENVER 1300 AE/G valve seat diameter: Ø 76 mm, height: 6 mm valve diameter: Ø 82 mm, height: 69 mm used, tested ! Dimensions: 82 x 82 x 69 mm

Suction valve, ring lamellar valve, compressor spare part GARDNER - DENVER 1300 AE/H valve seat diameter: Ø 76 mm, height: 6 mm valve diameter: Ø 82 mm, height: 69 mm used, tested ! Dimensions: 82 x 82 x 69 mm

Suction valve, ring lamellar valve, compressor spare part GARDNER - DENVER 1300 AE/K valve seat diameter: Ø 111 mm, height: 5 mm valve diameter: Ø 118 mm, height: 84 mm used, tested ! Dimensions: 118 x 118 x 84 mm

Suction valve, ring lamellar valve, compressor spare part GARDNER - DENVER 1300 AE/L valve seat diameter: Ø 111 mm, height: 5 mm valve diameter: Ø 118 mm, height: 84 mm used, tested ! Dimensions: 118 x 118 x 84 mm

Simple unit for transporting plastic granules, such as PVC from cable recycling. Suction through hopper and 100 mm flex tube. Forwarding by fan/fan in rotary valve for dust removal. By extending the pipes, the unit can also be located further away from the feeding point. The big bags are suspended by height-adjustable chain hooks. The unit consisting of a rotary valve and filter is also adjustable in height. Of course, boxes can also be used instead of big bags. The machine can be inspected and tested with us.

Sauglanze SERA GmbH type: SL-02 article number: 30058008 Q: up to 200 l/h Length: 1000 mm < br /> immersion depth: 980 mm dip tube diameter: Ø 40 mm connection inner diameter: Ø 10 mm connection thread: G 3/4 ( inches ) Material: PVC with level switch and foot valve New ! Dimensions ( suction lance ): 1030 x 75 x 60 mm Dimensions ( packaging ): 1180 x 90 x 90 mm

Vacuum suction nozzle FESTO VN-20-H-T6-PI5-VI6-RO2 526141 series B743 Operating pressure: 1 - 8 bar New ! Dimensions: 230 x 85 x 25 mm

Suction slide, ventilation duct slide, slide for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Length: 470 mm -Connection: Ø 500 mm -mechanical: flap -Material: sheet steel -Number: 1x slider available -Price: per piece -Dimensions: 550/470 mm -Weight: 22 kg

Laboratory fume cupboard, fume cupboard, suction -Connection: Ø 50 mm -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm -Weight: 31 kg

Laboratory fume cupboard, fume cupboard, suction -Connection: Ø 50 mm -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm -Weight: 32 kg

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -from: scrubbing machine make Gansow -Number: 17x available -Price: per piece -Dimensions: Ø 145/H210 mm -Weight: 2.7 kg

Key data: 250 mm, 5 kW, 4700 m³/h

Spänex dust extractor SMU 4500.11 Suction nozzle 250 mm Cleaning vibrating motor Nominal flow rate 4700 m³/h Minimum flow rate 3530 m³/h Motor 5.5 kW Filter renewed

Key data: 160 mm, 2 kW, 1780 m³/h

- Suction nozzle diameter: 160 mm - Flow rate: 1780 m³/h - Filter area: 11.5 sqm - Total power: 2.2 kW - Machine weight: 380 kg - Space requirements (W x D x H): 1.3 x 0.86 x 1.96 m - Condition: very good Details for continuous operation, for extracting dry wood dust and wood chips Accessories Documentation, 4 used collection bags

Description: Chips suction cups, (packaging material) serial number: 220000 60904, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 2,000 mm, weight approx.: 30 kg

Description: 1x suction cup, manufacturer Schäfer, type Mammut with green barrel 200 L 1x vacuum cleaner, manufacturer Thomas, vacuum cleaner with red barrel 200 L Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,200 mm, weight approx.: 30 kg

Description: Table dimensions 2000 x 1000 mm Suction mouth diameter 31.5 cm With shaker and 3 drawers without motor Approx. Onsite Dimension. (l x w x h): 1,000 x 2,000 x 970 mm, weight approx.: 0 kg

Description: with KOCH granule suction unit, type 3070D BELIK, year 2019 Approx. Onsite Dimension. (l x w x h): 1,800 x 1,600 x 3,000 mm, weight approx.: 180 kg

Suction nozzle diameter: 120 mm or 100 mm; Nominal flow rate: 1900 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.1 kW; Machine height: 1000 x 500 x 1800 mm (L x W x H); Weight: 39 kg;

Suction nozzle diameter: 150 mm or 2 x 120 mm; Nominal flow rate: 3000 m³/h; Chip bag volume: 2 x 1.3 m³; Filter cleaning: manual; Motor power: 1.5 kW; Dimensions: Weight:

Description: Attachment dryer type THD25E, tank dimension: diameter about 340 mm x 430 millimeters , Suction conveyor type TAL300 NE weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 800 x 800 x 2,100 mm

Dental suction RENFERT Vortex Compact 2924-0000, 230 V, 3,600 W, w/table extraction KAVO EWL 383, milling cutter handpiece