su used for sale

Hamlet of Commodor B -GS - Identifier -3 - Axis digital display "NEW" - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection -2x Emergency / Off -Swarf back wall -Coolant device - Work light - Multifix with inserts -Documentation

Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

L & Z lathe / WEILER DA 210x1000 / With new 3-axis digital display -Year of construction 2005 -CE - Identifier -Guided tours good -COMPLETE TECHNICAL DATA SEE PHOTOS - Three axis digital display "NEW" -Quick-release collet device incl. 79 x collets (173E) -Multifix base holder with inserts -Three-jaw chuck -Electric lining protection -Slide protection additionally -Coolant device -Drill chuck / rotating tip -Swarf back wall -Work light -Complete documentation Dimensions: LxWxH 2.8x1.2 x1.8 meters / Weight 1600 Kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis -Spindle bore approx. 42mm -Quick-change holder -Thread/Metric/Inch etc. -Tailstock MK 4 -Electric lining protection -Three-jaw chuck -Swarf back wall LxWxH 2.4x1x1.7 meters / Weight 1600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg

Key data: 410 mm, 800 mm

TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant

Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

Offer 26083 Technical data: - Center height / center width 210 / 1500 mm - Largest rotary, Ø over bed / over face slide 420 / 270 mm - Largest turning diameter with removed bridge 640 mm - Length of the bed bridge approx. 270 mm - Spindle bore 58 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 180 mm - Spindle speeds 45 - 1800 rpm - Feeds - longitudinal 0.031 - 1.70 mm/rev - Flat 0.14 - 0.784 mm/rev - Travel of the upper slide 128 mm - Face slide travel 285 mm - Metric thread pitches - Inch thread - Drive 400 V / 7.5 kW - with: - tailstock, 3-jaw chuck, quick-change steel holder, - Digital display - Space requirement approx. W 2850 x H 1500 x D 1200 mm - Weight approx. 2000 kg

This 5-axis Schneeberger Sirius HPM was manufactured in 2006. It features a powerful control unit, GE Fanuc Series 160i-MB, and operates with grinding oil. The machine is equipped with an Absolent A5 oil mist extraction system for enhanced performance. If you are looking to get high-quality grinding capabilities, consider the Schneeberger Sirius HPM surface grinding machine we have for sale. Contact us for further details.

Nedermann Typ Ab570 NE 76 S 200 used

serial number: 208892 control: Siemens 611 weight: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A horizontal surface grinding machine Elb is available. Grinding process: peripheral grinding, table dimensions X/Y: 915mm/255mm, magnetic chuck dimensions X/Y: 600mm/310mm, grinding dimensions X/Y: 600mm/300mm, max. grinding height: 400mm, feed rate: 30m/min, speed: 2600rpm, machine dimensions X/Y/Z: approx. 2000mm/1600mm/2100mm, weight: approx. 2750kg. An on-site inspection is possible.

A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible.

A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Steel beam, HEB steel beam, double T-beam, IPB steel beam, steel column -Steel beam: HEB 140 mm with head and base plate -Condition: according to pictures -Total length: 4280 mm -Width: 140 mm -Height: 140 mm -Flange thickness: 12 mm -Bridge thickness: 7 mm -Base plate: 300 x 300 x 25 mm -Head plate: 200 x 250 x 20 mm -Number: 53 pieces steel beams available -Price: per piece -Weight: 171 kg/piece

Confoot supports for BDF bodies up to 30 tons very good condition Location 33142 Büren Cash payment on pick-up

Stainless steel tank with two dished heads and a central outlet, fitted with a level gauge, a cleaning pipe and a manhole., Additional title: Vertical stainless steel tank, Volume: 18500 l, Width: 2,9 m, Height: 3,25 m, Weight: 1300 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, level indicator, CIP-pipe, manhole

Sturm Coating System Description: For sale is a used coating plant from the manufacturer Sturm, formerly used at the Mercedes-Benz plant in Hamburg for the machining of rear axle beams. Technical data & scope of delivery: Manufacturer: Sturm (plant) / KUKA & Yaskawa (robot) Year of construction main plant: 2019 Former operation: 3-shift (age-appropriate condition) Plant components: Aggregates, dryer and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several replacement KUKA robots (models KR 210L 150-2 / KR 210 2, model years 2006–2012) Related Robot Control Cabinets 2x Yaskawa Robot EPX 2900 1x Thermal aftertreatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to plant maintenance, it is state-of-the-art Electrics & mechanics: Mostly in an age-appropriate or good con ...

Used SCM S520 NOVA thickness planer useful working width mm. 520 Standard 4-knife shaft working height min/max mm. 3,5/300 max removal mm. 8 Double rubberized drive roller at the exit nr. 1 toothed drive roller at the inlet Electric Deck Lift 4-speed feed Star/delta starter Shaft rotation speed 4500 rpm Weight kg. 687 CE compliant

This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details.

This 5-axis KUGLER Micromaster MG2 was manufactured in 2002. It features an X-axis travel of 250 mm, Y-axis travel of 305 mm, and Z-axis travel of 200 mm. The machine is equipped with a high-speed Fischer Precise spindle, capable of speeds between 60,000 and 160,000 rpm, and a SERCOS real-time motion control interface. If you are looking to get high-quality grinding capabilities, consider the KUGLER Micromaster MG2 ultra-precision micro-grinder we have for sale. Contact us for further details.

turning diameter over bed: 350 mm turning diameter over slide rest: 216 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 40 - 1800 U/min centre height: 170 mm spindle bore: 40 mm total power requirement: 4,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,0 x 0,85 x 1,6 m Centre lathe (lead screw and feed rod) - Digital readout - 3-jaw chuck (160 mm) - Spare jaws - Coolant system - Multifix tool post - 4 Multifix tool holders - Steady rest - Live centre - Chip tray - Chuck guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0447 Brand: TB Model: 29 Jack planer for planing and trimming wooden edges Technical data: Rpm 14000 Power 1000 watts, single-phase 220 V Knives 60 mm Large work surface for comfortable and safe working Overall dimensions cm 25 x 35 x 15 h Weight kg 4

: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 510 mm, 1500 mm, 300 U/min

Hello, I get this lathe at the beginning of August. With a lot of accessories: steady rest, lathe chuck – clamping jaws, quick-change holder and.. Heidenreich & Harbeck Type Hanseat 480 Year of manufacture 1980 Center height 255 mm Turning diameter over support 300 mm Center width 1500 mm 24 speeds from 23.6 to 2500 n1/min Tailstock MK 4 Chuck F 250 Motor 380 Volt 11 kW Transport dimensions: Length 3200 mm Width 1200 mm Height 1550 mm Weight 2.5 to. Lathe Hanseat 480 incl. accessories St Description 1 instruction manual 1 Lynette small 1 Lynette large 1 4- Jaw chuck small 1 4- Jaw chuck large 15 quick-change tool holders Set designation 2 jaws for 4-jaw chuck 38 jaws for 3-jaw chuck

SCM surface planer offered. Working width: 520mm, cutter block diameter: 120mm, knife dimensions X/Y/Z: 520mm/35mm/3mm, max. speed: 5000rpm, max. depth of cut: 8mm, total jointer table length: 2750mm, infeed table length: approx. 1550mm, dust extraction port diameter: 120mm, machine dimensions X/Y/Z: approx. 2750mm/1415mm/1200mm, weight: 875kg. Inspection by appointment possible.

Ride-on - Sweeper & Suction Machine Manufacturer: Gansow Type: 150 P Year of manufacture: 1999 Operation 13.7.2000 Operating hours 280 h Drive: Petrol engine Broom drive: Hydraulic Special equipment: Panorama Cabin Location: Lower Saxony Price freely loaded from location.

turning length: 1000 mm turning diameter: 210 mm swing diameter over bed slide: 300 mm centre height: 167 mm spindle bore: 40 mm bed width: 210 mm turning speeds: 40 - 2500 U/min total power requirement: - kW weight of the machine ca.: 1000 kg. range L-W-H: 2000 x 1000 x 1700 mm Features: - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60 ...

turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60- ...

turning length: 1000 mm turning diameter: 330 mm turning dia. over face-slide: 198 mm turning dia. in gap: 476 mm spindle bore: 38.0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: DIN ISO 702-2 Nr. 4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1.5 kW weight of the machine ca.: ca. 610 kg. range L-W-H: 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped wit ...

turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 360 mm centre height: 180 mm turning speeds: 70-2400 U/min total power requirement: 2,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 2000x1500x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions The data ...

: . centre distance: 3000 mm max. swing diameter: 660 mm multifix: ja steady: 2 Stück weight of the machine ca.: 5 t length: 5,80 mm width: 2 m height: 1600 mm centre height: ca 290 mm circulating through support: 370mm : KW 39/2022 Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gefült mit 43 Aufnahmen height: 2.200 mm width: 1.200 mm weight of the machine ca.: 300 kg : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EMCI, Explo 750T, Weight: 3800 kg, Dimensions: 450 x 150 x 235 cm, Drive: 75 HP diesel engine, Drill motor:, -Rotation speed 260 RPM, -Power: 3200 Nm, Pull-up/pull-down: 2500 kg-2500 kg, Comes with 32 x 3-meter drill pipes (96 meters), 1 x 250 mm drill bit, 1 x 300 mm drill bit, 1 x 200 mm drill bit, 1 x 150 mm drill bit, 1 x 400 mm auger drill bit., , = More information =, , Type of fuel: Diesel, Year of manufacture: Jun 2008, Model year: 2008, Power: 55 kW (75 HP), GVW: 3.800 kg, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dri ...

Open-face drilling machine from Schmidt Kranz & Co GmbH, Reliable German quality, This open-face drilling machine is designed for drilling with the Open-Front Technique, also known as auger drilling. This is a trenchless drilling technique. Trenchless drilling minimizes the impact on the environment and allows work to be carried out under existing structures without excavation., This machine can be used for a wide range of underground infrastructure applications where trenchless construction is required., • Brand: Schmidt, • Type: Open-face drilling machine, • Condition: Very well maintained, • Ready for immediate use, , Accessories, 57 pcs. Casing pipe with internal diameter Ø 350 mm, length 1000 mm, 29 pcs. Auger plus head: 1 MTR Ø 320 mm, 7 pcs. Auger: 1 MTR Ø 350 mm + clamp, 50 pcs. Casing pipe with internal diameter Ø 260 mm, length 1000 mm, 6 pcs. Auger: Ø 240 mm, 37 p ...

Fraste MD/XL , , ENGINE:, type: JOHN DEERE 4045TF275 DIESEL, number of cylinders: 4, displacement: 4.5 L, power: 86 kW, , ROTARY HEAD - , type: R12D100, number of hydraulic motors: 2, number of rotary heads: 2, Torque, speed (motors connected in series):-: 410 kgm(1) - 100 rpm/1’(1), Torque, speed (motors connected in parallel): 820 kgm(2) - 50 rpm/1’(2), , LIFTING SYSTEM, Lifting capacity (up): 5000 kg, Lifting capacity (down): 3500 kg, Stroke: 3500 mm, , CLAMP:, Type: double , Clamp diameter: Ø60÷280 mm, Max. diameter: 280 mm, , HYDRAULIC PULL CYLINDER, Number of cylinders: 2, Pulling capacity (up): 20,000 kg, , WINCH:, 2,000 kg (40 m/1), , Pump (suction pump), BBA - NB140 (350 m³/h, 25 MWC, 105 mm ball passage), , Included with the machine:, 20 drill pipes, length 3 m (60 meters total), , = More information =, , Type of fuel: Diesel, Year of manufacture: 2006, Model year: 2006, ...

Condition: Used, , Manufacturing year: 2012, , Serial nr: 13-10-932, , Engine: Yanmar 3 TNE74-YC, , Hour meter reading: 795, , , , Source Regeneration machine, , , , Tooljoint outer diameter 135 mm, , Inner diameter 100 mm, , Outer diameter 114 mm, , Undercarriage Hinowa”, , Scanreco control system, , , , , , By installing/connecting a submersible pump, pumping is possible at the desired depth; the digital water meter records the flow rate; the hydraulic reel is operable and adjustable., , = More information =, , Type of fuel: Diesel, Year of manufacture: 2012, Model year: 2012, Technical condition: good, Visual appearance: good, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just l ...

Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...

turning diameter over bed: 455 mm turning diameter over slide rest: 285 mm turning length: 1.000 mm center height over bed: 225 mm centre distance: 1.000 mm digital readout: 2-Achsen ANILAM bed width: 330 mm spindle taper: KK 6 DIN 55027 spindle bore: 45 mm turning speed range: 16 - 1.000 U/min power requirement: 3,0 / 4,2 kW taper in tailstock-quill: MK 4 dia. of quill: 62 mm quill stroke: 145 mm coolant: voltage: 400 V total power requirement: 4,5 kW weight of the machine ca.: 1,95 t dimensions of the machine ca.: 2,45 x 1,10 x 1,80 m - Serial-No.: 29-2561 - ANILAM 2-axis digital readout - 4-jaw tool holder - coolant equipment ATTENTION! Machine is sold without a chuck. Upon request and for an additional charge, the following 3-jaw spiral chucks can be included: - CENTER Ø 200 mm = 780.00 EUR - CENTER Ø 250 mm = 1,030.00 EUR The data for this ad was created with ModulMWS - the sof ...

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1500 mm spindle bore: 55 mm faceplate: 550 mm steady: 140 turning speeds: 40-1800 U/min digital readout: Haidenhain bed width: 340 mm steady: 140 mm 3-jaw chuck: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No. 62 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit ...