su used for sale

x-travel: 500 mm : breite 450 mm serial number: 386 weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   electronic controls WORKING RANGE SURFACE GRINDING   grinding length: 600 mm   grinding width: 200 mm TABLE (SURFACE GRINDING)   magnetic table: yes MAGNETIC TABLE   length: 600 mm   width: 200 mm   weight: 100 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (max): 4200 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 250 mm   borehole: diameter: 51 mm   width: 25 mm ELECTRICAL SPECIFICATIONS   total power consumption: 7.5 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3000 mm   space requirements -front/back-: 2540 mm   total height: 1850 mm   total weight approx.: 2000 kg

EA Electro-Automatic EA-EL 9080-170 B Laboratory Power Supply EA-EL9080-170B | EA-EL 9080 Item Condition: Used 6.3A 2400W PD 7,00 Financing by our bank is also possible. komplett-konzept.leasingo.de You can find more laboratory power supplies - new and used - in our shop! International shipping costs on request!

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

Key data: 510 mm, 2500 mm, 4 St.

Trainer: Martin Type T 51 Planing width 510 mm 4 Knife Shaft Strip Planer Knife Standard Slit table lips for quiet running Swivelling dressing stop Table lengths 1400 mm and 1100 mm Maximum chip depth: 16 mm Speed of the knife shaft approx. 5000 rpm. Motor power approx. 5 kW Weight approx. 900 kg Dimensions approx. 2600 mm x 700 mm x H 1000 mm

A Wassmer surface grinding machine for the pre-grinding process in brick production is available. Stages: 1, wheel diameter: 700mm, feed speed: approx. 5m/min, drive: belt. An on-site inspection is possible.

- Oscillating screen with 3 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of chips used in the inner layer of chipboard, equipped with 10x10 mm - 2.20 - 0.36 - powder meshes. - Total installed power 15 KW. - 2 chip inlets with a diameter of 650 mm. - 3 + 3 sieve planes with a total sieving area of 78 m². - Chip outlets: 3 with a diameter of 650 mm and one with a diameter of 500 mm. - Longitudinal distance between supports 3730 mm. - Transverse distance between supports 3940 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and acc ...

Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...

A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.

Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

Manufacturer: Samco Model: FlexLiner II Year of Manufacture: 2018 Type of Machine : UCP plasma machine The samco-ucp FlexLiner II is a production type plasma cleaning system designed for surface cleaning of various types of leadframe packages. This system operates with a remote plasma source in the downstream process mode. The plasma is generated by RF power in the source and then injected into the process chamber through a shower head. Dimensions: 1,520 mm (W) x 1,410 mm (D) x 2,130 mm (H) Key Features and Benefits - Single substrate production equipment for various types and dimensions of substrates and magazines up to 300 mm x 300 mm - Gentle handling with minimal movement of substrates and magazines - Touchscreen GUI for user-friendly, intuitive operation - Multiple sensor controls for highly reliable operation - High throughput due to simultaneous (un)loading and plasma proces ...

table 800 x400 mm

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.

Table dimensions X/Y: 900mm/350mm, magnet dimensions X/Y: 600mm/350mm, max. workpiece height: 375mm, max. table load: 300kg. Machine dimensions X/Y/Z: 3200mm/2600mm/2400mm, weight: approx. 400kg. Documentation available. An on-site inspection is possible.

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping device, clamping supports, clamping tool, clamping box, clamping tower -U-profile: steel profile 160 x 160 mm -Interior dimensions: 95 x 125 mm -Length: 800 mm -Weight: 81 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connections, hand pipe, hose connector -Manufacturer: Nilfisk, Bent End Plastic Tube Ø 40 VA unused OVP -Type: 107402631 -Diameter: Ø 45 mm -Number: 4x pipe available -Price: per piece -Dimension: Ø 48 x 320 mm -Weight: 0.1 kg/piece

PTC relays, contactors, semiconductor contactors, relays, fiber optic converters -Manufacturer: Phoenix Contact, DIN rail power supply -Type: QUINT-PS 3x400-500AC/24DC/5 -Order No.: 2938594 -Number: 3x power supply units available -Price: per piece -Dimensions: 130/70/130 mm -Weight: 1 kg

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: Servo Power Supply -Type: TVM 1.2-050-220/300-WO/220/380 -Item: 232270-04397 -Price: per piece -Number: 2 pieces -Dimensions: 390/105/H325 mm -Weight: 14.8 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, switching power supply -Manufacturer: TDK-Lambda, DIN rail power supply -Type: DPP480-24-3 -Input: 3 PH 400-500 VAC -Output: 24 VDC 480 W -Dimensions: 150/112/H124 mm -Weight: 1.7 kg

Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner -Submerged arc welding machine without: power source -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 -Intermediate hose package -Equipment -Dimensions: 1200/800/H500 mm -Weight: 215 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 94 mm -Length: 220 mm -Height: 15 mm -Number: 4x milling support available -Price: complete -Weight: 4.7 kg

Hydraulic cylinder, support cylinder -Piston diameter: approx. 130 mm -Piston rod: 100 mm -Stroke: approx. 700 mm -with support rollers -each cylinder with hand pump -Number: 3 cylinders available Price: per piece

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 100 mm -Length: 800/1000 mm -Height: 825 mm -Thread: M24 -with stand: 200 mm wide -Number: 4x milling support available -Price: complete -Weight: 2566 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 90 mm -Length: 700 mm -Height: 150 mm -Threaded holes: M24 -Bores diameter: 25 mm countersunk -Number: 1x milling support available -Price: per piece -Weight: 70 kg/piece

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 700 mm -Length: 107 mm -Height: 440 mm -Threaded holes: M24 -Bores diameter: mm -Number: 2x milling support available -Price: per piece -Weight: 235 kg/piece

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 100/120 mm -Length: 230/330 mm -Height: 65/78 mm -Number: 6x milling support available -Price: complete -Weight: 58 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 60 mm -Length: 160/200/300/400 mm -Height: 40 mm -Number: 14x milling support available -Price: complete -Weight: 58 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 140 mm -Length: 370 mm -Height: 53 mm -Threaded holes: M12 -Number: 4x milling support available -Price: per piece -Weight: 21 kg/piece

Extraction slides, ventilation duct slides, slides for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Length: 470 mm -Connection: Ø 500 mm -mechanical: flap -Material: Steel sheet -Quantity: 1x slider available -Price: per piece -Dimensions: 550/470 mm -Weight: 22 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Transfer: in the current condition as seen -Vacuum suction cup: with damage -Version: with vacuum suction cup, equipped with directional valve and induction knife for the stroke -Stroke: 70 mm -Sucker: Ø 125 mm -Piston rod: 20 mm -Total length: 420 mm -Total length extended: 490 mm -Number: 31 pieces available -Price per piece -Dimensions: 420/140/120 mm -Weight: 4 kg/piece

Power supply unit, DIN rail -360 W, 24 V/1 5 A -Power supply output type: Fixed/Adjustable -AC input voltage: 85 V to 132 V, 187 V to 264 V. -Number of output channels: 1 -Nominal output voltage: 24 V -Output current max.: 15 A -Power output max.: 360 W -SVHC: No SVHC (19-Dec-2012) -Areas of application: Industrial -External width: 80 mm -Width: 80 mm -Input voltage change: 0.5 % -Frequency input-: 63 Hz -Frequency supply max.: 63 Hz -Power supply unit -Frequency supply min.: 47 Hz -Weight: 1.1 kg -Height: 125 mm -Load change: 0.5 % -Length: 125 mm -Length outside-: 125 mm -Mounting: DIN rail -Rated power: 360 W -Voltage output: 24 V -Voltage output max.: 28 V -Voltage output min.: 24 V -Current output: 15 A -Power supply type: switch mode -Depth outside: 125 mm -Supply voltage: 264 V -Supply voltage max.: 264 V -Supply voltage min.: 85 V

Power converter, power supply, power supply unit, switching power supply, power supply device, built-in power supply unit Manufacturer: Siemens, built-in power supply system SVS2 -Type: E24 G5/ 18 WRG -Order No.: 6EV 3053-OCC -Technical data: see nameplates and photos -Dimensions: 200/60/H245 mm -Weight: 1.9 kg

Bracket, holder, support block, retaining support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor -Support stand: height-adjustable, swiveling -Height: up to approx. 650 mm -Width: 550 mm -Dimensions: see photos -Number: 12x holders available Price: per piece -Overall dimensions: 665/150/H650 mm -Weight: 15.3 kg/pc.

Bracket, holder, support block, support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor -Support stand: height-adjustable, swiveling -Height: up to approx. 620 mm -Width: 540 mm -Dimensions: see photos -Number: 2x holders available Price: per piece -Overall dimensions: 665/150/H617 mm -Weight: 13.4 kg/pc.

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, pulse module, built-in power supply -Manufacturer: Mean Well, built-in power supply unit with housing -Type: SP-480-24 -Input: 100-240VAC 50/60Hz 6.5A -Output: DC 24V 20A -Number: 8x power supply available -Price per piece -Total dimensions: 550/160/H280 mm -Weight: 12.1 kg/pc.

Power supply, power converter, power supply unit, switching power supply, DIN rail power supply, power supply, pulse module, built-in power supply unit -Manufacturer: Mean Well, Built-in power supply unit with housing -Type: SP-480-24 -Input: 100-240 VAC 50/60 Hz 6.5 A -Output: DC 24V 20A -Dimensions: 420/125/H230 mm -Weight: 7.1 kg

Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine -Manufacturer: Finke, horizontal surface grinding machine with magnetic plate -Magnetic plate: 550 x 200 mm -Traverse paths: x 500 mm / y 260 mm / z 260 mm -Drive: 1.5 kW -Grinding wheel: Ø max. 200 mm -Dust extraction device -Transport dimensions: 1950/1300/H1590 mm -Total weight: 1108 kg

Pendulum grinder, vertical grinder, swivel arm vertical grinder, surface grinder, grinder, l, surface grinder, magnetic grinder, surface grinder-vertical, cup grinder -Manufacturer:Lomefa, cup grinder -Grinding height: max. 235 mm -Grinding wheel: Ø 200 mm -Work table: 285 x 200 mm -Drive: 1.1 kW -Accessories: including grinding wheels, see photo -Total dimensions: 1160/650/H880 mm -Total weight: 208 kg

Surface grinder, grinding machine, horizontal surface grinder, surface grinder, magnetic grinder -Manufacturer: aba Abawerk, surface grinding machine-horizontal type FFK with magnetic plate -Magnetic plate: 360 x 122 mm -Traverse paths: x 390 mm / y 170 mm / z 260 mm -Drive: 2.0 kW -Grinding wheel: Ø170 mm, max. 245 mm -Coolant device -Transport dimensions: 1120/1100/H1630 mm -Total weight: 604 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers, support rings, buffer rings, plastic rings -Support rings: for conveyor belt rollers, transport rollers, diameter 60 mm -Size: Ø 65/90 x 25 mm -Number: 33x support rings available -Price: per piece / Minimum order 5 pieces -Dimensions: Ø 90 x 25 mm -Weight: 0.1 kg/piece

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller -Manufacturer: Jungheinrich, swivel wheel from electric pallet truck EJE-KmS 16G-24-140-56 -Wheel size: Ø 96 mm / 100/40-75 -Dimensions: see photos -Number: 2x support rollers available - Price: per piece -Dimensions: 250/120/H135 mm -Weight: 5 kg/pc.

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Manufacturer: Powerthane / Jungheinrich, support wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Quantity: 1x support roller available -Dimensions: 240/160/H280 mm -Weight: 13 kg

Running gear, support wheel, load wheel tandem, load rollers, steering roller, support roller, fixed roller, swivel wheel -Manufacturer: Powerthane / Jungheinrich, jockey wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Number: 1x support roller available -Price per piece -Dimensions: 235/160/H240 mm -Weight: 13,1 kg/pc.

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Support roller: Support wheel from Logitrans SGL 2000V pallet stacker -Wheel size: Ø 170 mm -Quantity: 1x support roller available -Price: per piece -Dimensions: 240/155/H275 mm -Weight: 14 kg