su used for sale

General SKU397X1129 LocationBarneveld MakeLauda TypeSUK 350 W Mach.No.B14 730 Pressure Working pressure4 Bar Main Features Heating (medium)Electric Capacity44 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:Water/Glycol (1:1) Heating capacity1 m³/h Electric capacity44 kW, 400 volt With coolingcheck (Water) Capacity12 kW at +10 °C Temperature0/80 °C Tank capacity60 Ltr. With pumpcheck Capacity3 m³/h Motorcheck With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck With switchgearcheck Total height2 m CEcheck Floorspace1,14 x 1,5 m Weight950 kg Extra Specifications Connections (outflow/return): :Flanges DN50: PN16: DIN 2633 Compressor: Semi-hermetic reciprocating compressor Delivering pump: Grundfos C ...

General SKU397X1165 LocationBarneveld MakeLauda TypeSUK 250 W Mach.No.HKS10 047 Pressure Working pressure shell10 Bar Working pressure tubes16 Bar Main Features Heating (medium)Oil Capacity18 KW Temp.200 °C Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4306 (304L) Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity18 kW Electric capacity18 kW With coolingcheck Capacity10 kW at –20 °C Temperature-30/175 °C Tank capacity50 Ltr. With pumpcheck Capacitymax. 15 m³/h Motor5,5 kW With temperature controllercheck (PID controller (LAUDA SR 600) as is) Information Year of construction2010 Mounted on framecheck With switchgearcheck Total height2 m CEcheck Floorspace0,78 x 2 m Weight1300 kg Extra SpecificationsGeneral Design Power supply: 400 V / 3 Ph / PE / 50 Hz Power consumpti ...

General SKU397X1103 LocationBarneveld MakeLauda TypeSUK 400 W Mach.No.HSK04075 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity30 KW Temp.160 °C Specified Features - Temperature control unit MaterialCopper Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity30 kW Electric capacity88 kW 400 V With coolingcheck Capacity20 kW Temperature-20/160 °C With pumpcheck Capacity5 m³/h With temperature controllercheck Information Year of construction2004 Mounted on framecheck With switchcheck CEcheck Floorspace0,98 x 1,9 m Total height2,3 m Weight1750 kg Extra SpecificationsCompressor: Semi-hermetic reciprocating compressor Operating temperature: -20°C … +160°C Temperature control: PID controller Temperature measuring element: Pt 100 Control deviation: less than 1 K Heat carrier: Therminol D12 Delivering pump: Sterling ...

ELDAN SUPERCHOPPER SC1412 T, Powerful crusher for Tires, Cables, Plastics, Wood, other waste materials, Sturdy supporting structure and frame, vibraring extractor, vibrating extractor, loading hopper, electric cabinet, Goood working conditions, See how it works [HERE](youtu.be/KgxG4KchZkI), working width: 1.400 mm.

max. wheel diameter: 2500 mm gear width: 980 mm max. module: 34 min. module: 2 grinding stroke stepless adjustable: 1000 mm root circle dia. min.: 180 mm number of teeth: frei wählbar max.helical angle: 0 - 35 ° grinding slide stroke: 20 / 200 U/mm grinding wheel peripheral speeds:: 35 / 45 m/s grinding wheel diameter: 340 / 435 mm grinding motor: 22 kW pressure angle: 12,5 - 30 ° table diameter: 1300 mm table load capacity: 10000 kp table bore diameter: 300 mm depth of hole: 300 mm roll feed: 0 - 1000 m/min table diameter: 1300 mm workpiece weight: 10000 kg clamping length: 2760 mm clamping height: 420 - 590 mm table bore diameter: 280 mm depth of hole: 300 mm Control: BWO H+K CNC 785 total power requirement: 79 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: 7,3 x 7,9 x 4,5 m - 10 axis CNC control BWO H+K CNC 785 (2nd Generation from 2009) - integrated measurement ...

Key data: 560 mm, 410 mm, 450 mm

YCM Supermax YCM-56 T X-560 mm Y-410 mmZ-450 mm 4 and 5 axis Control: Fanuc MXP 200i Table 700X420 mm Works flawlessly Location: CH

Key data: 350 mm

SPECIFICATIONS: Saw blade: Ø 350 mm Installed power: 2.8 kW Voltage: 380 V Complete with table and extraction system

Cutting speed: 80m/min, saw blade dimensions X/Y/Z: 2760mm/27mm/0.9mm, miter range: 60°/45°, working height: 950mm, cutting range X/Y: 280mm/150mm, max. cutting diameter: 230mm. Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 350kg. Documentation available. An on site inspection is possible.

A mobile cheese brining machine Sugnaux is available. Throughput: approx. 120-150 loaves/h, cheese diameter range: 100mm-200mm. Machine dimensions X/Y/Z: approx. 850mm/1000mm/1350mm, weight: approx. 250kg. The machine was recently overhauled with new couplings, control cables, wheels and frequency converter. Including vacuum cheese holder, second brush set and some spare parts. Documentation vorhanden. A visit on site is possible.

Lifting jacks used for positioning of all types of pneumatic transfer in the SUPERVAC range allowing the filling of containers or the feeding of equipment (Mixer, sifter, crusher...), Maximum working height (mm): 2600 , Height (mm): 3450 mm , Extraxe (mm): 760, Total height (mm): 3450 mm, Maximum discharge height (mm): 2600mm, Center distance (mm): 750 mm, Maximum load (kg): 100 , Energy: Pneumatic (SUPERVAC), Link to manufacturer: ceram-sa.fr/potences-elevatrices/, Centre distance: 750mm

Ratiostretch RS10/2 RA1978 Height: 2540 mm Width: 1650 mm Turntable diameter: 1650 mm Length: 2600 mm maximum rewindable product weight:2000 kg maximum wrappable product height: 2330 mm maximum wrappable product basic dimensions 1100x1200 mm Turntable speed: 12 rpm (max.) / 3 rpm (min.) Lifting carriage speed: 4 m/min (max.) / 0.6 m/min (min.) Turntable height: 85 mm Voltage: 230V, 50Hz, 6A Year of manufacture 2012 weight: 480 kg Foil width: 450-500 mm Foil diameter: 240 mm Roll weight: up to 20 kg Foil thickness: from 7 µm Current mounting: embedded in floor, optional drive-on ramp available Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Max. Palettenabmessungen: 1100 x 1200 mm Max. Palettengewicht: 2000 Max. Palettenhöhe: 2330 Rotating plate diameter: 1650 Masthöhe: 2540 Drehtellerhöhe: 85 Width in mm: 1650 Länge in mm: 2600 Const ...

Key data: 1100 mm, 2 , 180 mm

Broadband KÜNDIG Made in SUISSE - 1100 mm grinding width, 180 mm height - 2nd strip with: three-roller units / 2nd grinding roller with shoe for fine sanding - Grinding table Fix Sodas can be sanded in a continuous flow ( KUNDIG patent) - Electronic control The machine is immediately available from stock The price is: 4.900,-€ net from stock. That's a great price! A demonstration is possible

Starting Air Valve Wärtsila Sulzer From old stock Unused!

Starting Air Valve Air Starter for Wärtsila Sulzer RTA 48T-B Several available

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

Size: 520 x 740 mm Equipments: CTP Computer-to-Plate Imagesetter For Thermal Plates Mit Prinekt Workflow, Prinekt Meta Shooter, Prinekt Meta 64 Diodes 17 Plates/Hour at 2540 dpi PDF Toolbox, Interne Platten Manual plate loading, automatic plate unloading

Dimensions (L/W/H): 4410x3050x2727 mm Weight: 13070 kg Total power requirement: 172 kw Wide Belt Sanding machine Linie SANDOMAT WT-RRC1300+SUR-RP1300 Wide Belt Sanding machine WT RRC1300 (Roller+Roller+combination)- Max. Working width 1300mm- Min. Working Length 490mm- Working Thickness 3-150mm- First unit: Contact roller Ø240- Second unit: Contact roller Ø240- Third unit: Ø240 pad- Total: Motor 77kw- First Unit: Motor 30kw- Second Unit: Motor 22kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 1.5kw- First unit: Contact roller shore Steel- Second unit: Contact roller shore 80sh- Third unit: Contact roller shore 55sh- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 13502620mm- Air Pressure 0.6Mpa- Overall Dimensions 2235×3050×2600mm- Net Weight 5700 kgs- Working Table Fixed- Working table height from the ground 900mm- Voltage 400v/5 ...

Dimensions (L/W/H): 3000x1200x1240 mm Weight: 850 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x1000x1240 mm Weight: 650 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4630x3005x2334 mm Weight: 12160 kg Total power requirement: 135,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gorman Rupp 82H52 supra Electric starting. The perfect pump in combination of pressure and capacity., Sucks in very quickly., Widely used for spraying filters for well drainage, NEW and UNUSED 3 x in stock, Applications:, -Pumping surface water, -Spray scorching, - well drainage, spraying filters, - irrigation of sports fields, - drill and arc zinc work, , Max: 61 MWK (Pressure), Max: 45m3 H (capacity), , Available with any desired connection., If you are interested, we are happy to help you., , Throughput capacity: 45 m3/h, Max dirt passage: 19 mm, Motor brand: Hatz, Max. head: 61 MWK, Max dirt passage: 3000 rpm, Weight: 89 kg, , = More information =, , Year of manufacture: 2025, Empty weight: 89 kg, Cargo space capacity: 750 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, s ...

Offered are 2 screw compressors with the following features per unit: Power: 15kW, pressure: 10bar, volume flow: 1950l/min (1.95m3/min), speed: 2930rpm, including sound enclosure, 1) year of construction 1989, operating hours: approx. 38100h, 2) year of construction 1986, operating hours: approx. 10600h. Inspection possible by appointment.

Turning- in machine for casemaking Schmedt Präkant HHS6F double action turning-in for cases up to 60x60 cm manual foot operated, so the timing of turning-in is decided by the operator

🔥 Highlight offer at Form-on! 🔥 Buy the Form-on super plate 15.0 new †available now and ready for immediate delivery. These new super plates are an absolute must-have in formwork accessories : robust, galvanized, and perfect for use with tie rods . 💪 ✨ Special extra: Delivery comes in used reusable containers ♻ †sustainable and safely packed. Note: Containers are not included in the unit price . 🔍 Want to check the quality yourself? No problem: You can inspect the material anytime at our Form-on warehouse †or conveniently via smartVISIT , the digital and fast solution to get an impression of the quality without having to come by in person. 👉 Looking for anchor plates , new super plates , or want to buy Form-on super plates right away? Then don’t miss out on this offer †only while stocks las ...

verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen

Manufacturer: Soest Type of Machine : Universal Surface Finishing Line – Parquet / Wood Surfaces Year of Manufacture: 2019 Condition: Very good, lightly used Complete Soest universal surface finishing line for oiling, staining, lye treatment, and patination of wood surfaces, especially parquet. Robust industrial design with Siemens frequency-controlled motors and continuously adjustable speeds in forward and reverse. Includes roller coating machine, brushing/spreading machine, and extensive accessories. Components Included: - Roller Coating Machine RCR-400-L Reverse - Brushing/Spreading Machine VP-400-1B-2P-2B - 2 replacement application rollers - Material pump (new, unused) - 4 replacement brushes - Various spreading pads - Pneumatic brush cleaning machine Technical Details: - Maximum workpiece width: approx. 410 mm - Motor control: Frequency-controlled (Siemens) - Speed contr ...

Inv. Num. : 8867 Type: - Producer: Surfin Generated: Parameters: Inner width: 1250 mm Inner depth: 1250 mm Interior height: 2100 mm Equipment: 3x filter cartridge

Size: 930 x 1140 mm Equipments: Thermal-CTP 2 laser heads Gen II, ( with 64 Laserdiodes) Class 160 Resolution: 2540 dpi, SCL Single Cassette Loader Productivity option = 21 plates/h.

De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.

through-put width: mm working heigth: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WORKING AREA 3200 x 2100 mm, X and Z axis 200 mm SPEED X and Y AXIS 70 m/min, Z axis 20 m/min ISAC ITALIA CONTROL 21.5-INCH TFT COLOR SCREEN GRID-ENABLED CONTROL WITH ETHERNET AND USB CONNECTION - 9 kW ISO 30 COPDLE - 9-SPINDLE DRILLING UNIT - LAUNCH MANAGEMENT DRILL - 8-POSITION TOOL CHANGE - 2 vacuum pumps (250 m3/h) - 6 vacuum zones - Loading and lifting unit - Final cleaning unit for slabs - Conveyor belt unit for unloading workpieces - Alpha CAM CAD/CAM software - Alpha Software Cam xNesting - Security barriers to protect against unauthorized access

Used W&P bread roll line, type: MULTIMATIC MUC-5 with Super B Compact - Head machine / dough divider Multimatic MUC-5 - 5 rows - Up to 95g dough weight per dough piece - Proofer Super B Compact - for emperor and sliced rolls - with side discharge - The system was in operation until the end Visits and test runs are possible by arrangement.

Manufacturer: Sulzer Model: G6500 Year of Manufacture: 2005-2007 Machine Type : Weaving loom Machine details: 1) Two machines - Model: Sulzer G6500 - Width: 240 mm - 4 electronic colors - 20 total colors - Equipped with Staubli 2670 shedding machine: - 18 colors - Plus 4 colors LGL Electronics Progress 3 2) One machine - Model: Sulzer G6500 - Width: 220 mm - 8 colors - 20 harness hooks - Equipped with Staubli 2670 - Comes complete with 20 harnesses - Includes 4 IRO Roy weft yarn score counters Find more here - / W Contact us at -

SECOND HAND FILTER TYPE - VELO FILTER MODEL - 0057 / MATR OR11 380 VOLT THIS ITEM IS SECOND HAND AND SOLD AS SEEN For more information and more available stock please visit us at - advancedbrewing.co.uk

Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11, Interchangeable Wheels , Other EMCO Parts: Clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...

Support, traversing carriage of a Schaublin lathe, sgt. Condition, See photos ! Rotatable, feed via lever, infeed, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

Min. plate format: 240 x 240 mm Max. plate format: 676 x 760 mm - SCL - MCL - Inline punching - Stacker PST 26C - incl. RIP

workpiece diameter: 660 mm workpiece length: 8000 mm honing/re-bore length: 7600 mm internal diameter: 50,8 - 609,6 mm stroke length max.: 7600 mm spindle motor: 29,8 kW spindle turning speed range: 0 - 300 U/min Lifting capacity: 13,5 kW stroke speed: 0 - 30,5 m/min workpiece weight: 8000 kg control: Siemens Simatic total power requirement: - kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 18,7 x 1,5 x 1,5 m Universal horizontal. Honing Machine / Long Stroke Cross Grinding Machine with servo drive and electrical feed system - Siemens Simatic (Touch) - Coolant system with paper band filter - steady rest The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell here a vacuum sealer from the manufacturer Webomatic, type Supermax in a good used and functional condition. The machine runs on 400 volts, 1.5 kW, rollable, chamber dimension W/D/H 60/50/24 cm, completely stainless steel, sealing bar right and left, workshop tested, dimensions W/D/H 80/70/95 cm, others on request.

For sale is a used bag in box system from OK with 3 rolls of consumables. In addition to the system, a used Heripack carton erector and sealer as well as conveyor technology and a printer system can be purchased as an option. Send us your task and we will discuss the optimal solution for a fair budget. 10.00" x 8.00" x 6.00" (L x W x H) min. 250mm x 200mm x 100mm (L x W x H) min. 25.00" x 18.00" x 20.00" (L x W x H) max. 650mm x 450mm x 500mm (L x W x H) max. up to 18 boxes per minute. All standard polyethylene films (HDPE, LDPE, LLDPE, stainless steel, electro-galvanized. More information will be provided later. co-extrusions.). For sale is a used bag-in-box system with three rolls of consumables. Optionally, a used Heripack carton erector and sealer, conveyor technology, and a printer system are also available. Please send us your requirements, and we will discuss the optimal solution ...

Heavy Duty Semi-Automatic Vertical Panel Saw Wood Her Supercut 1216 Cutting area 5300 x 2200 mm Cutting depth max. 80 mm Swivelling control panel Central display for horizontal and vertical cutting pneum. Lifting and lowering the transport rollers pneum. Latching during vertical cutting pneum. Horizontal cut locking pneum. Immersion of the sawing unit Interface extraction Saw motor 5.5 kW CE version Machine is FUNCTIONAL in VERY GOOD CONDITION From stock Lieboch 

Pall Supradisc Filter - Secondhand, Unused Item: Manufacturer: Pall Corporation Type: SUPRADISC Model: WSFZ161 (038.161.1) Year of Manufacture: 2021 Made in Germany This is a secondhand item that remains completely unused since purchase in 2021. All components are present and correct. (Offered in "As-is" condition) This is a SECOND HAND ITEM and is sold as is For more information and more available stock please visit us at - advancedbrewing.co.uk

feed pressure: 8 bar Effective free air delivery: 235/165 L/min Receiver capacity: 50 / 10 l / bar weight of the machine ca.: 37,5 kg. Number of cylinders: 2 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 790 x 400 x 730 mm This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

SUNNEN ML2000, Honing Diameter Range:, - Manual Stroking: 1.5 mm to 165 mm, - Power Stroking: 1.5 mm to 102 mm, Spindle Speed:, - Infinitely variable from 200 to 3,000 RPM, Stroke Rate:, - 60 to 350 strokes per minute, Automatic Sizing Range:, - 3 mm to 51 mm, Oil Tank Capacity:, - 106 liters, Pneumatic Requirements:, - 5.5 bar, Machine Dimensions:, - Length: 1,600 mm, - Width: 1,220 mm, - Height: 1,900 mm, Weight:, - Approximately 725 kg

This EUMACH SUMO 1400 Vertical Machining center was manufactured in the year 2004. It is equipped with a HEIDENHAIN 426 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm, is good condition and well maintained.

Prepress machine model CTP Type: Suprasetter A52/A75, GEN III Manufacturer: Heidelberg Year: 2011 Complete with RIP and decommissioning SW Number of exposed plates: 113,000 Number of exposed m2: 46,000 RIP: Metadimension 10.01 Decommissioning: Prinect Signa Station 10.02 The imaging unit is in excellent condition with regular service and a low number of exposed plates Find more here - / Contact us at -

: ja miter: 1500 mm : 230 mm weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   electronic controls WORKING RANGE -HONING-   stroke max.: 170 mm   stroke min.: 6 mm   stroke rate (max.): 500 /min   stroke rate (min.): 60 /min WORKING RANGE -INTERNAL HONING-   Spindle speed    from: 200 /min   .. to: 3000 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1200 mm   space requirements -front/back-: 1600 mm   total height: 1900 mm   total weight approx.: 750 kg including partial equipment

PRESS FORCES   total force (nominal): 600 to PRESS TABLE   table surface (left-right): 3070 mm   table surface (front-back): 1530 mm SLIDE   stroke: 305 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 296 mm/s   return velocity max.: 380 mm/s TOOL ASSEMBLY DIMENSIONS   passline opening (free passage in side columns): 1220 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 4250 mm   space requirements -front/back-: 2100 mm   total height: 5700 mm