studer e used for sale

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm : 180 x 100 mm Working height: 925 mm saw blade turning speeds: 15 - 150 U/min total power requirement: 5,5 kW weight of the machine ca.: 0,615 t dimensions of the machine ca.: 1,4 x 1,4 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 410 - 1000 mm workpiece height max.: 765 mm coolant: ja boring spindle diameter: 38 mm diameter of quill: 70 mm spindle stroke: 225 mm boring spindle: MK 4 mm/min spindle turning speed - stepless: 70 - 2000 U/min feed range - spindle: 0,04 - 0,32 mm/U column diameter: 225 mm bore radius max./min: max. 1130 mm table surface area: 630 x 1320 mm height adjustment: 500 mm base plate: 1500 x 1000 mm T-slots: 4 Stück T-slot - distance: 18 mm total power requirement: 2,2 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m shift of supports: 590 mm without turntable and tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ESTA SLDG 800, used refrigerator Used refrigerator with sliding glass doors Esta refrigerator SLDG 800 – the ideal solution for efficient cooling. With a capacity of 776 litres, space-saving sliding doors and adjustable grates, it offers maximum use of space. Tropicalized unit and convection cooling system guarantee reliable performance at +3°C to +7°C. • External dimensions (H x W x D): 204 x 114 x 63 cm • Interior dimensions (H x W x D): 114 x 105 x 50 cm • Usable volume approx. 756 litres • 6 adjustable shelves • Convection cooling • Internal temperature control range: +3 to +7° C • Interior: sheet steel • Outer material: sheet steel • Refrigerant: R134a • Plug-in ready (220-240 V/50 Hz, 5.5 A) • Door made of thermoglass •Indoor We would like to point out that with regard to the Product Safety Regulation, the product offered here is int ...

max. wheel diameter: 0 mm gear width: 0 mm max. module: 40 min. module: 1 weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AMADA EUROPE 255 CNC punching machine was built in 2004 in France by AMADA EUROPE S.A.. The machine, designed for machining thin sheet metal of a maximum thickness of 3 mm, is distinguished by its high efficiency and reliability. In order to obtain the highest precision of the produced parts, all the machining processes are performed on a large brush table. This table, thanks to its design, prevents scratches and nicks on the sheet metal during the material feed, and also significantly reduces the noise level. The EUROPE 255 punching machine is also offered with extensive equipment, including e.g. a cooling unit, light curtains and an advanced GE FANUC CNC control. The total weight of the machine is 11000 kg. Technical specifications of the AMADA EUROPE 255 punching machine - maximum press force: 20 t (200 kN) - feed in the X/Y axis: 1280/1320 mm - feed rate in the X,Y axis: 82 m/m ...

Distillation plant for WFI water or pure steam generation Manufacturer : DEWA Type: DP 30 EVS Technical specifications : Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg Documents: available

; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

container volume: 600 l internal dimension: 1500 x 740 x 780 mm dimensions of the machine ca.: 1900 x 810 x 860 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt width: variabel Belt length: bis 14000 mm Total belt loading: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

container volume: 600 l internal dimension: 1500 x 740 x 780 mm dimensions of the machine ca.: 1900 x 810 x 860 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Finnrose Plate Stacker Type ST-10-170 Electronic For automatic stacking (e.g. on roller conveyor for further transport) Of plate-shaped workpieces, doors, or woods Was used to stack timber behind a four-sided planer Workpiece size Maximum 2500 mm x 800 mm Minimum 400 mm x 250 mm Weight maximum per workpiece 80 kg Capacity 20 workpieces per minute, depending on the workpiece size Maximum stacking height above floor 1800 mm Belt drive 0.18 kW Roller drive 0.09 kW Compressed air consumption per stroke 3.9 NL Instruction manual and circuit diagram available Weight approx. 600 kg Dimensions 2800 mm x 2200 mm x H 1100 mm (H max. 1800 mm)

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 14 mm Boring power: 15 mm : MK 2 bore depth: 70 mm throat: 180 mm : bis 275 mm : 529 mm table surface area: 250x220 mm column diameter: 65 mm Total height: 890 mm total power requirement: 0,6/1,0 kW : 420-2100 U/min. weight of the machine ca.: 63 kg Machine with CE mark! new machin Domestic equipments: - Stepless speed control - Table adjustment via rack - Digital speed display - Full motor protection - drill protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 5395; Engine: Perkins 2506C-E1STAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

Tool holder VDI 30 longitudinal holder Interface size square 20x20 3.3020DSS left overhead Cantilever length (LPR) 100.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 36.00 mm Clamping length, max. (LSCX) 100.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-3-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c4-links-ueberkopf-/69496 Condition: New

Tool holder VDI 30 longitudinal holder Interface size square 25x25 2.3025G300 right overhead Cantilever length (LPR) 70.00 mm Functional length (LF) 0.00 mm Working height (HF) 25.00 mm Functional width (WF) 17.00 mm Clamping length, max. (LSCX) 70.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Interface size square 25x25 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-2-3025g300-laengsaufnahme-stahlh oehe-25-/28007 Condition: New

1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.

Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.

Folding machine Shoei Model Mach Eight Year 1995 Serial 7092 Size Min: 150 x 210 mm / Max: 470 x 640 mm Feeder suction wheel + stream feeder Folding configuration 2 plate buckles + 1 knife Delivery detachable belt delivery Details Vacuum pump, noise hood, electronic speed control, sheets separations head Condition Rollers, belts, vacuum roller are all good Available direct

Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimension: Width: approx. 1,350 mm Height: approx. 938 mm Depth: approx. 820 mm The scope of delivery includes: 02x Workbench stand, used Material colour: sendzimir galvanised Stand height: 900 mm Stand depth: 800 mm Stand profile: 100 x 100 x 3.00 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss Type: BX100/50/15 Clear width: 1,140 mm 08x Safety pins, used Design: completely galvanized 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,350 mm Particleboard depth: 820 mm Particleboard one-piece 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,120 mm Partic ...

Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665

Water pump, make Wilo, type: IL-E80/8-40-BF-R1, dry rotor pump with frequency converter, approx. 160 m³/h, 8-40 m head, 15 kW, 2915 1/min revolutions, nominal pressure 16 bar, YOC 2007

Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimension: Width: approx. 1,665 mm Height: approx. 938 mm Depth: approx. 820 mm The scope of delivery includes: 02x Workbench stand, used Material colour: sendzimir galvanised Stand height: 900 mm Stand depth: 800 mm Stand profile: 100 x 100 x 3.00 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss Type: SLO089|2 Clear width: 1,445 mm 08x Safety pins, used Design: completely galvanized 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,665 mm Particleboard depth: 820 mm Particleboard one-piece 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,425 mm Particleboard dep ...

Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimension: Width: approx. 1,350 mm Height: approx. 938 mm Depth: approx. 820 mm The scope of delivery includes: 02x Workbench stand, used Material colour: sendzimir galvanised Stand height: 900 mm Stand depth: 800 mm Stand profile: 100 x 100 x 3.00 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 02x Workbench trusses, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss Type: SLO89|2 Clear width: 1,140 mm 04x Locking pins, used Design: completely galvanized 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,350 mm Particleboard depth: 820 mm Particleboard one-piece 06x Self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The pict ...

Flame Perkin Elmer mod. AAnalyst 200 Including: Air-Acetylene burner Controlled with LCD touchscreen Refurbished

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...