strip cutter used for sale

Manufacturer: Gertrud Diebels recycling machines Industry Cable Stripper Model: RMH 80 Diameter range: 1 up to 80 mm Drive: 1.5 KW/400 v

Qty. 1 Second-hand steel strip slitter Mfc.: Dai Hyun Built: 1994 Still in operation until end of July 2023 Material to Slit: Hot & cold rolled steel coil, Hot deep galvanized steel, Carbon steel Line Direction: Left to right Strip Width: 1400 mm Thickness: 0.8 - 6.0 mm Max. Coil weight: 24 MT Un-coiler ID with Liner: Ø 480 mm, Ø 600 mm Coil Dia.: Ø 1000 & Ø 2000 mm Re-coiler Inside Dia.: Ø 500 mm, Ø 760 mm Slitting Speed: 50-100 m/min Edging width: 3 mm to 10 mm Electric Power: Input voltage: 400 V, 50 Hz - 220 VAC, 50 Hz,3 Ph. ± l 0% for drive Control Voltage: 110 VAC, 50 Hz, 1 Ph. Slitting capacity Working speed and No. of cuts Min. slit width is 40 mm at thickness 1.0 – 2.5 mm. Strip thickness No. of cuts No. of strips Line speed mm m/min 1.0 - 1.9 16 15 70-90 2.0 - 2.9 14 13 70-80 3.0 – 4.0 12 11 60-70 4.1 – 5.0 7 6 60-70  ...

- Pipe clamp / pipe clamp 12307351 & Strip / strip 12302221 MWM - Suitable for several motors - Please note! Price for pipe clamp and strip. Can also be delivered separately on REQUEST. - 12307351 & 12302221 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting f ...

approx. 400 pcs. Stiffening trusses for shelving racks, Bito, type SV etc. (when using these stiffening trusses, the use of tension crosses can then be dispensed with) , used - : Price per piece: 2.-€ (net)! We reserve the right to a minimum purchase quantity! Manufacturer: Bito Type: SV Year of manufacture: unknown Dimensions: for 1.30m wide fields Height: 40mm Stiffening trusses are hooked into the slot pattern of the column and secured with safety pins against unintentional lifting Unfortunately, locking pins are not included – but you can also secure them with screws for supporting shelves with a load capacity of 100, 200 and 300 kg bright galvanized, Original price: approx. 9.- € (net) / piece Condition: good Available: as of now (delivery time of the frames on request! Location: Frankenberg warehouse Quantity roughly estimated!

Hyundai Steel Dangjin Facility (widely known as "Thin Plate Mill") is a premier steel production plant featuring a Compact Strip Process (CSP) as the main production line, complemented by a 150-tonne heat-size electric Meltshop, a thick Slab Caster, and two Skin Pass Mills. Initially commissioned by Hanbo Steel in 1995, this facility was acquired by Hyundai Steel in 2004 including a major modernization in 2011 and more recent upgrades, ensuring its continued excellence in production. Assets Available for Sale: • Electric Meltshop 150 tonnes heat size – DC EBT Electric Arc Furnace, Ladle Furnace, Vacuum Degasser and associated equipment. • CSP – A Thin Slab Cast & Rolling line combining casting, heating, and rolling. 55mm thickness slabs directly enter a tunnel furnace and are rolled in a Hot Strip Mill for final strip thickness from 1.4 to 16mm and up to 1,560mm width ...

The Hot Strip Mill at JFE Steel’s Keihin district stands as a testament to cutting-edge steel production technology, boasting the capability to manufacture Japan's widest hot-rolled steel strip. Commissioned in 1979, the mill has been continually upgraded throughout the years to maintain its competitive edge. Production ceased in September 2023, leaving behind a legacy of excellence. It features a Pair Cross Shift Mill for adaptive roll gap control to optimize thickness and shape. A key enhancement was the integration of a Sizing Press in 2009, which allows for variable strip widths while using slabs of constant width. This not only increases the productivity of the slab caster and reheating furnace upstream but also expands the range of products that can be manufactured efficiently. Capable of rolling slabs measuring up to 2,300 mm in width, with thicknesses ranging from 160 t ...

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

The scope of delivery includes: 01x Standard divider strip, used Material colour: sendzimir galvanised Overall length: approx. 2,440 mm Separation strip length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (HxW) Single-sided protective plug Weight / piece: approx. 2.19 kg The price shown corresponds to the pick-up price (unit price) incl. VAT. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Machine for stripping cables - see picture

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x 63 A socket -Supply cable, plug 63 A -Dimensions: 520/520/H800 mm -Weight: 20 kg

Siebler + Göring 5000/160E vertical four side seal strip packer for effervescent tablets, maximum foil width 160mm, currently fitted with handling and format parts for 20mm diameter tablets. Output up to maximum 150 strokes per minute. Includes a duplex module of ABB Flex-Picker robots for automatically loading an existing cartoning machine infeed (cartoner not included)

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 19.5 kg

Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 63A / 16A -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

Technical data: -Clip device -Glass Strip saw blade diameter approx. 300 mm -Pneum.. Material clamping - powered 400 V - Working pressure 7 bar -Air consumption per operation approx. 1.6 L / stroke -with: - Removal - roller conveyor with controlled positioning - level stop 3000 mm -Feed - roller 3000 mm - e - foot switch - regulator - space about B 4200 x H 1700 X 900 mm -Weight approx. 600 kg

Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 50 pieces -Type: 734-107/037-047/ 7-pin -Quantity: 7x box available -Price: per box -Dimensions box: 200/145/H40 mm -Weight: 0.4 kg/carton

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 60 pieces -Type: 769-103 3-pin -Price/Delivery: complete -Dimensions box: 290/130/H70 mm -Weight: 0.6 kg

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 50 pieces -Type: 769-102 2-pin -Price/Delivery: complete -Dimensions box: 280/80/H60 mm -Weight: 0.4 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Paslode, strip nails paper bound 2 boxes / approx. 8500 pcs. -Type: 2.8 x 63 Smooth Bright -Art.No.: 092615 -Price/Delivery: complete -Transport dimensions: 300/260/H240 mm -Total weight: 30.9 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Paslode, strip nails paper bound 2 boxes / approx. 8000 pcs. -Type: 2.8 x 70 Smooth Bright -Art.No.: 090082 -Price/Delivery: complete -Transport dimensions: 300/260/H210 mm -Total weight: 29 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Paslode, strip nails paper bound 3 boxes -Type: 3.4 x 100 Smooth Bright -Art.No.: 090082 -Price/Delivery: complete -Transport dimensions: 300/260/H340 mm -Total weight: 47.1 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK -Art.No.: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm -Total weight: 27 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Collated Fasteners, strip nails 1 box/ 1400 pieces -Type: SNK 2266 3.8 x 120 mm -Price/Delivery: complete -Transport dimensions: 380/200/H130 mm -Total weight: 15.4 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Collated Fasteners, strip nails 1 box/ 660 pieces -Type: SNK 2285 4.6 x 145 mm -Price/Delivery: complete -Transport dimensions: 270/160/H150 mm -Total weight: 12.1 kg

Formwork nail, formwork nails, strip nails, nail strips, brad nails -Manufacturer: Collated Fasteners, Strip Nails 1 Carton/ 500 Pieces -Type: SNK 1985 5.0 x 160 mm smooth -Price/Fee: complete -Transport dimensions: 260/160/H150 mm Total weight: 12.1 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Power strips, portable power strips, solid rubber power strips, adapters, construction site power distribution boxes, CEE adapters -Manufacturer: Bals, CEE adapter 32A / 16A -Transport dimensions: 255/145/H165 mm -Weight: 2.6 kg

Power strips, portable power strips, solid rubber power strips, adapters, construction site power distribution boxes, CEE adapters -Manufacturer: Bals, CEE adapter 63A / 32A -Transport dimensions: 255/145/H165 mm -Weight: 3.3 kg

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 20 kg

Various sizes, on and including 4x cantilever trolley Auction-ID: A1-48474-144

Auction-ID: A1-41279-702

Auction-ID: A1-41279-521

BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

with ELAP Jolly control Bibi -FCA 86, 1 x drive/pump unit CMO, 1 electric motor and separate electric motor with blower/extraction unit Auction-ID: A1-49723-22

Auction-ID: A1-48474-424

Various Extension Cords and Power Strips Auction-ID: A1-49705-617

Auction-ID: A1-49581-6043

used roller strip Make: SSi-Schäfer Rail length: approx. 1600 mm Width: 39 mm overall width: approx. 42 mm Height incl. roller: approx. 36 mm 56 rollers per bar Roll Material: Plastic Roll width: approx. 26 mm Roll diameter: approx. 26 mm Surface: galvanized Price: 8,00 net per piece Shipping up to 10 pieces per package 15,90 EUR gross

RA1787 SLP depth supports / depth bar, galvanized, L = 1.100mm Support of the pallet center runner for transverse storage. 2 pieces required per pallet storage location. Also suitable for storage of skeleton containers. More than 100 pieces in stock - please ask for the required quantity! Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

TD FLAT STRIP NAIL 4.6X160MM Auction-ID: A1-40897-215

strip encoder for wet adhesive tape Cyclop Lapomatik; good condition; cleaned and tested; Max. Ready to roll 100mm, min.20mm; Strip length 100-1150mm; Heater for quick drying. Paper tape dispender Cyclop Lapomatik; good condition; cleaned and checked; max.roll width 200mm, min.20mm; Strip Lenght 100-1150mm; heater for fast drying.

Romaco-Siebler HM1/160 vertical strip packing machine for tablets, 3 lanes, maximum foil width 170 mm, includes format parts for tablets with dimensions of 7.2 x 5.6 x 17.5 mm and 11.4 x 6.31/WR8.5, foil reel core diameter 76 mm, maximum foil reel diameter 450 mm, Siemens SIMATIC S7-300, excellent working condition with only approx. 1600 running hours

Sour Water Strippers (SWS-1 and SWS-2) (1981) Year: 1981 Two redundant units for removal/reduction of H2S and ammonium (NH3) from plant wastewater by using stripping steam. Year of manufacture 1981 Process Design by Shell Process Engineering by Comprimo B.V. Throughout for each SWS max. 1289 t/d (incl. 1,58 t/d NH3 and 2,82 t/d H2S) Operational operating temperature SWS-1 = 102°C, SWS-2 = 95°C Operational operating pressure SWS-1 = 0,1 bar, SWS-2 = 3,3 bar 2022 – Decommissioning

Strip cylinder BOSCH 0822 956 004 stroke 320 mm piston diameter Ø 16 mm Dimensions: 510 x 55 x 27 mm

Strip cylinder with position sensors BOSCH 0822 955 114 stroke 3253 mm piston diameter Ø 32 mm Dimensions: 3495 x 90 x 65 mm

Strip cylinder MARTONAIR M/45132/ stroke 500 mm piston diameter Ø 32 mm slide: 165 x 100 mm Dimensions: 740 x 100 x 85 mm