We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,555 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Ilapak stainless flow wrapper Carrera 2000 PC Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel.
used
Thermoforming machine TLT 2600 PP-film max. 260 mm Usable web width max 245 mm ( strip length max. 120 mm ) Strip configuration 2 lane , across Indexing max. 212 mm Depth of draw max. 10 mm Film speed max. 13 m/min Cutting die max 300 cycle/minute (or 600 blisters/min) Forming station max. 110 forming cycles/min Including inspection camera Leatus
used
Philips Diagnost H with the following system components: Generator Optimus 50 Tube SRO 33100 0.6/1.3 Vertical stand Diagnost VE • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.
used
Maximum width of forming film : 160 mm Forming area : 150 x 125 mm Maximum forming depth : 15 mm Mechanical output : 100 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 500 mm Reel of lidding film : 300 mm Inlet air pressure : 6-8 bar Feeding : Manual(can be automatic) Forming type : Vacuum
used
Automatic Deep Draw Thermoformer High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled. Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc. Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service. Main features: Independently servo-driven machine stations. Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability Easy, tool-less change over: index change and size-related parameters automatically selecte ...
used
Maximum width of forming film : 150 mm Maximim forming depth : 12 mm Mechanical output : 65 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 450 mm diameter Reel of lidding film : 250 mm diameter Air consumption : ca. 10 Nm3/h Operating pressure : 6-7 bar Cooling water : 0,12 M3/h power consumption : 12 Kw Weight : 1600 Tablet feeding system : Dedicated feeder for 3 differents tablets color Camera system with automatic discharge
used
Cerutti coating machine for Paper, films and Aluminium Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporation (water). This process is repeated in lin ...
used
used
Thermoformer - UPS4 Year - 1993 Min. - Max. Forming width - 62 - 226mm Cycles - 15 - 50 cycles/minute Forming depth - PVC - 12mm ALU - 10mm Blister Format - Min. - 60mm Max. - 140x39mm Punching Area - Length - 226mm Width - 284mm Forming Film width - Min. - 100mm Max. - 298mm Lidfoil Width - Min. - 100 Max. - 298 Tooling - PVC/Alu - 6 Blister line size 39x94mm Alu/Alu - 7 Blister line size 38x86mm Machine Control- PacControl version 2.17 Camera – not included Hapa Printer - H-231-1
used
used
used
used
1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2008. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: left. Used for upto 120 cycles/minute in a 72.000 cph line. Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.
used
used
used
used
used
used
Krebser Kehrli urological xray system UX 96 L with the following device components: generator Stadler SE 3000 tube Comet DI 86 HS-33/100-150 0.6/1.3 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient ...
used
used
Siemens Panorama dental x ray Orthophos with the following device components: generator D 3200 tube SR 90/15 FN 0.6 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
used
used
Siemens small X-ray/intraoral x ray system Heliodent MD (tube SR 60/70/7 0.7) • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
used
Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...
used
Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...
used
Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is ...
used
used
Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...
used
used
Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...
used
used
used
OEC Medical System Compact 7600 with: Tube Nagel & Goller EP-F-190 0.6/1.5 Image amplifier 23 cm LIH (Last Image Hold) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians ...
used
used
Multivac R 530 , built 2007 , film width 460 mm , print 480 mm , hard foil , M+R under-track labeler , 1000 ccm booster pump , Very good condition.
used
Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.
used
KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.
used
Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...
used
AOKI SBIII-350LL-40 injection stretch blow molding machine -Manufactured year : 2005 -Location : Korea
used
Kiener Straffbanderolier Auto Skinetta 450 with slinging chain strap and shrink tunnel with bar chain strap and hot air blower sideways and from above. Siemens Control Film width 40-450 mm
used
1 of used film-only multi-packer, make KHS, type Innopack Kisters SP 050 B2, new 2013. Operating side: links. Used for PET bottles 250/500 ml as 3x2=6-packs (dual lane) and 6x2=12-packs as well as 6x4=24-packs (single lane) in clear or print-registered film. Quick change-over via servos and spindles. Capacity upto 50 cycles per minute. Siemens S7 controls.
used
used
Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...
used
1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.
used
Film recycling and granulation plant Material: PE, PP, // Cascade extruder, snail/LD x 220+150/ x 26D, drives 232 & 99 kW, water separator, hot tee with underwater cooling, only 8,500 operating hours
used
used
Neri/Marchesini/Garvens/Multipack labelling & packing line for round plastic bottles consisting of: Bottle infeed table, Neri SL 400 self-adhesive labelling machine for bottles, etc., suitable for containers with a diameter from 15 to 80 mm, label height from 10 to 120 mm, conveyor width 80 mm, capacity up to 220 bottles per minute, bottle outfeed table used as a buffer, Cognex camera inspection of the print of the variable data (batch no., expiry date, etc.) on the labels, Marchesini MA155 horizontal cartoner, continuous motion, carton size range: A: 25 – 100 mm, B: 15 – 85 mm, H: 65 – 190 mm, capacity up to 140 cartons per minute, GUK leaflet folder from stack, bar code reader for leaflet, carton and presence of leaflet in the carton, Garvens S2 inline checkweigher with reject device and reject container, weighing range up to 300g, Multipack F40 collator & stretch bander for car ...
used
Serial number: 50109 Year of construction: 2010 Packaging machine for packaging with folded shrink film (half hose) of loose parts and groups of products of any kind. The products run along the adjustable inlet belt and through the welding transversely and along the foil web and are then closed as a bag. The film waste is wound up separately. Product feed can be manual or automatic. The operation is to be controlled by an operating panel. Machine CE-compliant Packing mass: 400 x Mm Product weight: 15 kg Power: 30 packs per minute roll width: 250 - 700 mm Control voltage: V24 Frequency: 50/60 Hz Installed capacity: 4 kW Total recorded power: 1-3 kW Air consumption: 500 L/h Operating pressure: 6 bar Maximum pressure: 8 bar Welding temperature: 180-300° Delivery speed: 4-30m/min Weight: 750kg Operating height: 1000mm
used
incl. 1 feeding and 1 laxative tape (stud tape) Used – good condition – functional – without CE declaration for the packaging of granular, bulk or powdered filling material Packaging processes are electronically controlled via PLC Machine frame made of aluminium, legs made of stainless steel Packaging material: Hot or cold weldable material – polypropylene, finely perforated material, variously lamination material depending on the packaging material and filling material length, the production speed can reach a maximum of 50 cycles/min. at a maximum film speed of 12 m/min. Maximum dimensions of the filling material : Min. Max. Filling material length 100 400 Filling material width 10 230 Packaging volume in liters 4 Foil roll circumference 500 Film roll diameter 350 specifications: Weight: 450 kg Power consu ...
used
– Thermoforming and Sealing Machine – GEA POWERPACK NT 76750101 – Year 2014 The GEA PowerPak thermoforming machine is specially adapted to different applications (vacuum, MAP, shrink, topform, skin, zipper, medical and technical packaging). Conversion to other packaging is easy and format changeover is quick and takes place in a few simple steps. To adapt this equipment to your needs, the Powerpak Thermoformer-Sealer can easily be completed with various integrated upstream and downstream components. A powerful conveyor chain securely grips the lower web of the feed drum. A precision servo motor indexes the web throughout the machine process. The length of the index is programmable on the HMI and stored as a recipe parameter. The loading area is accessible from both sides for several operators. Powerful GEA membrane sealing system for reliable seals and constant pe ...