stretch blow machine used for sale

Balestrini linear milling machine two milling units pneumatic pressure of elements

Hand notching sheet thickness 1.6 mm Compressive force 4 t Blade length 156 mm Angle adjustable from - to fixed degree Table area 450m x 305 mm Machine weight approx. 95 kg Dimensions LxWxH 530 x 380 x 480 mm

consisting of two jaw widths each: 125 mm Reference: Seitz and Strenger - Lot 80

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

equipped with ground clamp, welding torch, pressure gauge and power cable

equipped with 6 wire brushes and 6 plastic brushes, interchangeable; electric rotating head; including "Delfin" extractor, type: DBF30 "M", year: 2017, s/n: 170486169

Make : Trepko Filling Machine Cup Type : Split Cup Filling : Cereals and Yoghurt Condition : Good Pick and Place device for cup in Trays

Table dimensions: 320 x 320 mm Working length: up to 500 mm Reference: Hercegfi - Lot 76

Without the exhaust pipes

Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg

Mitutoyo, FN 905 S 3D Measuring Machine

Unused

Unused machine stripping of electrical cables with both hard and soft core, suitable for electrical cables from 1.5 mm to 38 mm, is delivered in a wooden crate with dimensions lxbxh: 65x35x43 cm.

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

incl. compressed air tank

Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional

Without the exhaust pipes

Column drill with: ARBO/CE approved protective cover. Quick-release chuck with pin. Tilting work table. Deep stop. Ejection wedge. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 120 mm Spindle mount MK 4 MK Table: 290 x 270 mm Column diameter 92 mm Speed 150 - 2450 rpm Total power requirement 1.1 kW Machine weight approx. 95 kg Dimensions L-W-H 0.66 x 0.8 x 1.7 m Condition: never used / new (5)

Condition: Unused, in the original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Strap for fall protection

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Stored in working condition, CNC controlled. Saw blade 400mm. The buyer must provide his own transport. Elevator available to charge it.

Tool changer: 20 places electronic handwheel

Spiral kneader Diosna W 240 A with 2 boilers Diosna spiral kneader W 240 A in good used condition with stainless steel spiral.The kneader is suitable for industrial and craft bakeries. The kneader and the boilers are driven by gear. -for max. 240 kg dough or for max. 150 kg flour -Stainless steel spiral kneader -digital control -Boiler inlet with pliers locking -with Siemens touch panel control -robust machine -more pictures and information on request -Shipping and trade-in on request -Machine can be viewed and tested in our warehouse

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

Keksmaschine gebrauchte

Sollas Bandum 25, untested, as spare part donor

Lot of milling machine accessories consisting of approx. 26 pieces of SK40 tool holders, some with tools & pulling bolts, various collets, clamping claws and Renishaw calibration dron Transport dimensions: 1,200 x 800 x 500 mm, approx. 100 kg

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

Grinding machine XXIII DH3 ready for use from site in actual condition

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Spindle diameter horizontal 75 mm, spindle diameter vertical 55 mm, feed X-/ Y-axis 1-5000 mm/min, feed Z-axis 10000 mm/min, tool holder SK40, 32 tool positions

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

4000 x 2000mm 6000w with auto pallet changer

Condition: unused, in the original packaging Portable welding machine Adjustable current: 10-130 Ampere Electrodes: suitable for electrodes from 1.6 to 3.2 mm Ø Duty cycle: 25% Equipped with: LED display Includes: MMA torch Connection: 220 Volt Technology: IGBT technology Function: electrode welding (MMA) Equipped with: "hot-start", "arc force" & "anti-sticking" function Features: Small size, lightweight, portable and easy to use Includes: manual

MIG 100 welding machine including welding wire - welding helmet - steel brush

Machine Vise Dimensions of elongated holes on the side: 460 x 14mm Dimensions of slotted holes at the front: 250 x 14mm Jaw width 200 mm Clamping range 210 mm Clamping height 55 mm Weight 34.5 kg Condition: never used / new (5)

Stored in working condition