129,514 used machines on RESALE, but how to find them? Machine Search
Machine number: H74/247 Press force: 4 Mp Oil pressure: max. 200 atm Motor power: 1.1 kW Table dimensions: approx. 250 x 250 mm Auction-ID: A7-46287-208
Machine number: 2561290 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 8 - 80 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm Auction-ID: A7-46287-22
Machine number: 35-173-98 Serial number: 2-0499 Compressive force: 4.5 kN Stroke: 60 mm incl. transport trolley Auction-ID: A7-46287-6
max. load: 25 kN Projection: 90 mm Plunger strokes: 220 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Table dimensions: approx. 220 x 150 mm incl. The installed punching tool Auction-ID: A7-46287-210
Consisting of two punching stations, driven by pneumatic cylinders incl. Installed punching tool on pedestal Dimensions of the pedestal: 560 x 300 x 170 mm Auction-ID: A7-46287-206
Machine number: 2-0586 Compressive force: 28 kN Stroke: 60 Table dimensions: approx. 200 x 150 mm incl. installed punching tool Auction-ID: A7-46287-204
Serial number: 055-007/12 Operating voltage: 220 V Frequency: 50 Hz Nominal current: 45 A Connection: 12.5 kW Control voltage: 60 W Press force: 25 Mp Operating pressure: 160 kp/cm³ Speed: 200 mm/s Sales: 450 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between ram and table: 800 mm Table dimensions: 640 x 500 mm Auction-ID: A7-46287-167
65,900 liter ZKG tank/ pressure tank/ storage tank LARGE with cooling jacket and insulation Material No. V2A Total height 12400 mm diameter 3000 mm Outer diameter 3480 mm Exterior surface 2B=IIIC ground Interior surface 2B=IIIC ground
51,570 liter ice water tank/pressure tank with insulation Material No. V2A Total height 10200 mm diameter 2900 mm Outer diameter 3480 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Minimum/maximum operating pressure (HP) 0.4 bar Operating temperature 90 °C Cylinder length 6500 mm Year of construction 1994 dished end/ domed end Cylinder: 15cm insulation 4 x sensors Manhole 440 x 340 oval Underbody: Dished end/domed end with foot ring and crane eye
Baier GEBA 1/F embossing press, Embossing plate: 70 x 90 mm, Embossed pressure: 600 kg, Work table: 620 x 620 mm, Embossing plate: 70 x 90 mm, Embossed print: 600 kg, worktable: 620 x 620 mm
Press brake manufactured in 2005. This Baykal APH 3110x200 features a bending length of 3100 mm and a capacity of 200 tons. It is equipped with a main motor of 15 kW and has a maximum stroke of 250 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APH 3110x200 machine we have for sale. Contact us for further details.
Available hydraulic press brake with el. Stop adjustment Power: 380V, 4kW, 9A, 50Hz
Laminating press manufactured in 2010. This LIGMATECH MPH 510/25/09 features an integrated assembly line setup with a total length of approximately 26 meters, including an entry section. It includes a cross-transport belt drive, working height adjustment, pre-selection of pressing time, and light curtain safety with 4-way muting. If you are looking to get high-quality laminating capabilities, consider the LIGMATECH MPH 510/25/09 machine we have for sale. Contact us for further details.
Equipment: heatable/coolable, insulation, overpressure,condition: brand new,volume: 3,850,max. overpressure: 3.3,lower bottom: eccentric cone,design: upright,stand shape: feet height adjustable,number of feet: 4,heating/cooling (filter bar): available,temperature control cylinder: half-tube coil,temperature control underbody: double jacket,insulation: available,insulating jacket: hermetically welded,insulation material: PU foam,material insulation jacket: stainless steel,insulation thickness: 70,diameter inside: 1.600,diameter outside: 1.800,cylindrical height: 1.250,total height: 3.900,technical documentation: drawing,
It is a used WP bun press type Rotamat CN for sale. The machine is thoroughly cleaned and checked, it works perfectly. The Rotamat CN is suitable for dividing and rounding doughs with a wide variety of consistencies and recipes, e.g. classic roll doughs, mixed and special doughs, pretzel doughs, doughnuts, sweet doughs. The weight range is 30gr. - 70gr. If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates. Price: 1780,--€ ecxl.VAT from stock Straubenhardt (Germany)
Long fence model LZT-UK-20-So Lower piston press for pressing composite components. Max. press force 20 t Press table 1400 x 1000 mm Opening speed 65 mm/s Closing speed 65 mm/s Press speed 2 mm/s Shelf width 600 mm Max cylinder stroke 600 mm Hydraulics System pressure 300 bar Safety distance 404 mm Delay time 202 ms Max weight lower tool 500 kg. 2 pieces of refrigerators GWK teco cs 90.Very good condition immediately available.
Höfer Heating press for composite components Table size 1600 x 900 mm Press force 800 kN Temperature Heat max. 300 °C. Accessories 2 pieces of cooling units. Good condition available immediately.
Presto HPK 50 HS baler, built in 2012, with perforator and riser belt (sliding belt conveyor belt) Manufacturer: Presto Type: HPK 50 HS Year of Make: 2012 Hours: 5812 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power 2 x 4 kW / 400 V Flow rate: approx. 220 m³/h Clear filling opening: 1380 x 1200 mm Climbing tape Length: 7931 mm Belt width: 1400 mm Overall width: 2026 mm Gradient: 29° Speed: 0.6 m/s Materials: paper, cardboard, foil, PET bottles Please note: All technical data refer to the manufacturer's spec ...
Offer 26027 Technical data: - Max. pressing force 32 t - Max. ram stroke approx. 250 mm - Max. installation height 350 mm - Pitch per revolution of the handwheel approx. 48 mm - Stand width / passage approx. 575 mm - Table support surface with 4 diagonal T grooves 575 x 475 mm - Printing plate area 500 x 260 mm - Tool holder at the top 30 mm - Through-hole in the table 200 mm - Space requirement approx. W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx. 1000 kg
Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870
Bed dim. approx. 1600x2250 mm; including new bedding for the beds; Has been used in printing blackboards Auction-ID: A1-41994-12
Technical Specifications Axes: Y1 - Y2 - X1 - X2 - R - Z1 - Z2 Maximum bending length: 3100 mm Labor force: 130 tons Stomp stroke: 400 mm Approach speed: 150 mm/sec Ascent speed: 150 mm/sec Working Speed: 1-10mm/sec Engine power: 18.5 kW Approximate weight: 14200 Kg Approximate dimensions: 4435 x 2734 x 3095 mm Notes: Complete with internal and external positioners Item sold in unverified status. Auction-ID: A1-44614-1
Stamp size 4x 120x150cm. Press height 88cm. Includes scissor lift table movable with rails dimensions lxw approximately 141x103.5cm extendable to 300cm, height adjustable rear output roller conveyor dimensions lxw approximately 480x180cm, 2 parts 2-way pneumatic roller conveyor dimensions total lxbxh 500x103x92cm. The required surface area is approximately 600x570cm. Includes air and power reel. Auction-ID: A1-41994-5
Veneer press OTT JU 90 -used----------- Technical data ----------Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4 pieces
General overhauled, new seals etc. Auction-ID: A1-46315-42
Telemecanique - Batch of pressure switches, rail-mount terminals and safety components Condition: unused QTY: XMLBL05R2S12EX 11x QTY: AB1VVN1635U 3x QTY: ZB2-BV185 16x QTY: XUSL4E2BB051L 4x Auction-ID: A1-46070-123
KOMORI LITHRONE S 829 P LX 8 colors with lacquer, reversing device and extended explanation Current meter reading: approx. 120 million prints Year of construction: 2008 Equipped with/equipped with: • Automatic reversing system for pressure passes 8/0, 4/4 • Lacquer group with chamber squeegee system type Bruno & Harris and anilox roll • LithoCoat lacquer circulation system • extended explanation • Baldwin GraphiSet 4 infrared dryer • PQC-S II Print Quality Control, remote control • CIP link • PDC-S II Print Density Control-Spectrophotometric. Colour management linked to the Press • KHS-AI Komori Hyper System-Advanced Interface for fast in-ink and ink removal • AMR Automatic Make Ready. Automatic paper thickness and size adjustment • Full-APC Full-Automatic Plate Changer • cocking register, adjustment of the cylinders, the register lateral, vertical & diagonal ...
RODCRAFT WP100P workshop press ; hydraulic pneumatic and manual with 2 speeds ; suitable for pressing, straightening and assembly work ; Capacity: 100 tons; Air pressure: 7.5 – 8.5 bar ; Cylinder stroke: 300 mm ; Inner frame width: 787 mm ; Drevelset: yes ; Weight approx. 800 kg; Aged model Auction-ID: A1-45170-8
Voltage: 380 volts ; Capacity: 60 TONS; Stroke length: 250 mm ; Width: 570 mm ; Auction-ID: A1-45170-12
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: hydraulic PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 2200 mm table surface (front-back): 1700 mm SLIDE stroke: 1600 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1600 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6536 mm space requirements -front/back-: 2923 mm total height: 6135 mm total weight approx.: 36000 kg
Wickert high-precision hydraulic press WKP 5000 S with sliding table. Total pressing force 5000 kN. Table size 1800 x 1200 mm, installation height min 800 mm, installation height max. 2300 mm. Opening stroke 1500 mm. Sliding table extendable 1500 mm. Year of construction 2011 very good condition. available from week 22/2026.
Used belt press for fruit by Klein type FP 2. New 1986. Modernised with the addition of inverter-controlled geared motors. Comes with water filters for cleaning the filter nets. Plus juice and circulating water pumps. Set with 3 pcs.
Automatic complete impregnation system IWT, B.J 2002. Diameter 1.8 m. Length 18 m. Impregnation including impregnating agent container. Including all pumps. System can be set at an angle, inlet on both sides.
Capacity, ton 1000 Course stroke, mm 170 Number of strokes per minute 32 Shut height, mm 470 Table size, mm 800 x 800 Weight, kg 26000 The presses are in working condition. Complete
used bread press Record Erika Automat Classic Q2 30 pcs, checked, with knitted plates, for 30 pieces, weight range from 25 to 120 g, mesh no. A110311, 1.5 kW, 3.8 A, 380 V, 50 Hz
With patented MULTIFORCE hub connection system!, The punching press automatically adjusts the cutting force to the size of the punch tool., It does not matter how resistant or thick the material to be cut is., Cutting table: 1,000 x 500 mm, Reach: 370 mm, Maximum cutting capacity: 25 t – 245 kN, Dimensions: 1.000 x 1.140 x 1.710, Net weight (with oil): 1.020 kg
Temperature range max.: 140 °c; capacity: 900 l/hr; diesel-fired: yes; power: 7.3 kW; connection: 400 V; unused in wooden box; 4496; Auction-ID: A1-45902-242
Temperature range max.: 140 °C; capacity: 900 l/hr; power: 7.3 kW; connection: 400 V; own weight: 128 kg; overall size L: 1150 mm; overall size W: 620 mm; overall size H: 850 mm; description: unused in wooden box; 4460; Auction-ID: A1-45902-507
Temperature range max.: 140 °C; capacity: 900 l/hr; power: 7.3 kW; connection: 400 V; own weight: 128 kg; overall size L: 1150 mm; overall size W: 620 mm; overall size H: 850 mm; description: unused in wooden box; 4460; Auction-ID: A1-45902-18
max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-45902-525
\" mixed lot of gas struts / gas pressure cylinders for tool and mold making. It mainly contains branded components from FIBRO, plus Bordignon (High Performance Line) and other identical designs. The parts come from stock, mostly unused, partly with traces of storage or use. Several cylinders are still packed protected (net / bag). Scope of delivery • complete lot as shown • approx. 38 pieces of gas struts / cylinders (according to the marking) • incl. protective packaging • no individual sale • Manufacturer: FIBRO, Bordignon • Type: Gas Pressure Spring / Gas Pressure Cylinder • Filling Pressure: • 150 bar • 180 bar • Spring Forces (depending on model): • e.g. 350 daN • 550 daN • 750 daN • Versions: • Various diameters and lengths • Short and long designs • Article/order numbers include: • FIBRO 2480.12.03000 • FIBRO 2487.12.00350.063 • FIBRO 2 ...
3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-405
380V; Motor: 4000W; Max. Flow: 14L/min; Max. pressure: 200 Bar; Max. intel water temp: 50 degrees; Power cable length: 3M; Automatic stop; Filter; High-pressure hose 10M; Spray nozzle 5759 Auction-ID: A1-45902-361
crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-45902-347
Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-43519-521
max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-45902-524
max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-45902-523
3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-404
maximum number of results exceeded
please refine your search
450 € 
