128,342 used machines on RESALE, but how to find them? Machine Search
Press has made 2 686 854 pieces so far, and large factories make well over 10 million pieces with these machines. The maximum theoretical diameter of the piece is 380 mm, production-wise max. 320 - 340 mm finished size. Depth 110mm finished measurement. Speed: small objects 300 - 350 pcs/h large ones 120 - 160 pcs/h. Between 2004 and 2010, less than 2 million pieces were driven on the Press, and after that the demand for the products has decreased and today it is driven only a few hours a week, sometimes the press stands unused for a couple of weeks
Crucifer processing made easy - with the KSB-2 you can debulk up to 600 cabbage heads per hour precisely and quickly, Semi-automatic de-strunking process (two-hand operation), Good condition, only a few operating hours, adjustable drilling depth, incl. standard drill head Ø 90 mm, Compressed air: 6 bar, Motor: 0.9 kW, The stalk stripper KSB-2 efficiently and professionally detaches whole cabbage heads (e.g., red and white cabbage, pointed cabbage) and is characterized by its user-friendly operation, stability, and hygienic design., Info at: .kronen.eu/de/loesungen/kohlstrunkbohrer-ksb-2, Note: The video shows the KSB-2 and the CAP 68, the predecessor of the CAP 350., power: about 2,000 kg/h, Dimensions / weight: L x W x H: 840 x 1,100 x 1,400 mm, Weight: 230 kg
CONTROLS electronic controls SCHMIDT PRESS FORCES total force (nominal): 0.25 to PRESS TABLE table surface (left-right): 180 mm table surface (front-back): 150 mm SLIDE slide force: 0.25 to stroke: 100 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 35 kg This is an assembly press with force-displacement monitoring. • Operating hours: approx. 150 • Condition: very good, almost like new • Features: Press force monitoring, two-hand operation • Stroke: 100 mm • Tool dimensions: 150 x 100 mm • Press force: 0.25 tons
Key data: 200 t, 80 mm
Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg
diameter range 1,8-3,4 mm nail length 13-80 mm output - pieces/min 550
diameter range 1,8-2,5 mm nail length 32-57 mm output - pieces/min 2000
diameter range 1,0-2,4 mm nail length 10-50 mm output - pieces/min 700
diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800
diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350
diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 950
diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370
wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370
wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420
diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550
diameter range 1-2,2 mm nail length 10-50 mm output - pieces/min 520
diameter range 2,1-3,1mm nail length 32-51mm output - pieces/min 1600
diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200
wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430
diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550
with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350
diameter range 1,0-2,2 mm nail length 10-50 mm output - pieces/min 700
diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800
press power 1000 to clear width 585 mm daylight 410 mm stroke 380 mm table size 0/ 700 mm
Key data: 10 t
Various spare parts for eccentric press - brands SMERAL and VSS KOSICE
EMMES pneumatic block gluing press Maximum gluing length 4000 mm Number of vertical clamps 8 Number of frontal clamps 4 Net price
Block gluing press EMMES EPP 200 pneumatic Maximum gluing length 2000 mm Number of vertical clamps 6 Number of frontal clamps 3 Net price
Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch -Manufacturer: Fischer, digital differential pressure switch -Article no .: DE45520040PK03MW -Basic measuring range: 0 ... 4 mbar -P max.: 50 mbar -Operating voltage 24 V DC/AC -Number: 2x pressure switches available -Price: per piece -Dimensions box: 200/160/H140 mm -Weight: 0.5 kg/piece
High pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial blower, high pressure blower -Manufacturer: Spelleken, high pressure blower type VRU-15-100-30H 1 -Drive motor: Holder 3 kW -Speed: 1430 rpm -Volume output: 0.25 m³/s -Pressure pt: 49.5 mbar -Connection input: Ø 105 mm -Connection output: Ø 105 mm -Bolt circle: Ø 180 mm -Dimensions: 900/510/H910 mm -Weight: 81 kg
Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Fischer, differential pressure switch -Article No.: DE2754K045BP00MW -Basic measuring range: 0...10 mbar -P max.: 100 mbar -Operating voltage 24 V DC -Dimensions: 100/90/H48 mm -Weight: 0.2 kg
Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Spare part: Stop bar comes from a Dorsten BBM press brake, type: APE80-3050 -Servo motor: Manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length (unit of measurement) approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg
Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool for: press brake -Support for: press brake tool -see drawing: at the photos -Number: 2x documents available -Price: per piece -Dimensions: 3600/110/H32 mm -Weight: 76 kg
Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball valve, temperature switch, thermostat, expansion valve, angle flange, valve flange, double pressure switch -Manufacturer: Johnsons Controls, double push-button switch, unused, original packaging -Type: P78MCS-9300 -Price: per piece -Quantity: 2 pieces -Package dimensions: 130/130/H70 mm -Weight: 0.7 kg/piece
High-pressure centrifugal fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Fan and plate: made of stainless steel -Motor power: 2.2 kW -Speed: 1440 rpm -Diameter fan: 550 mm -Quantity: 3 pieces available -Price per piece -Dimensions: 570/625/H625 mm -Weight: 74kg/piece
heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Kromschroder, gas pressure regulator unused OVP -Type: GDJ15R04-0 -p max.: 400 mbar -Dimension box: 110/130/H100 mm -Weight: 0.6 kg
High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer, pressure monitor, pressure switch -Manufacturer: Fema Honeywell, pressure switch for fuel gases unused OVP -Type: DGM 310A -Number: 2x pressure switches available -Price: per piece -Dimension box: 160/90/H65 mm -Weight: 0.6 kg/piece
Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, inline pump MOVI -V 25/104-3 -Drive: 0.55 kW -Speed: 2840 rpm -max. delivery rate: 0.5-2.4 m³/h -max. head: 39-24 m -Dimensions: 185/185/H555 mm -Weight: 22 kg
Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, Movichrom high pressure pump - G 3/5 PN25 G2 -Drive: 0.75 kW -Speed: 2810 rpm -max. delivery rate: 3 m³/h -max. head: 33 m -Dimensions: 220/250/H580 mm -Weight: 34 kg
High-pressure radial fan, dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Exhaust gas exhaust fan -E-motor: Lammers 400/690 V/3 kW -Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 -Speed: 3179 rpm -Volume output: 2160 m³/h -Connection input: Ø 735 mm -Connection output: 365 x 310 mm -Dimensions: 1300/740/H820 mm -Weight: 153 kg
Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators, hydraulic accumulators, diaphragm accumulators -Manufacturer: Bosch, diaphragm accumulator from injection molding machine Krauss HS 50 -Type: 0 531 014600 -Container content: 10 ltr. -Operating pressure: max. 211 bar -Dimensions: Ø 220 x 690 mm -Weight: 30 kg
Centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, high pressure pump Movichrom - G 9/2 PN16 G2 -Drive: 1.1 kW -Speed: 2825 rpm -Max. Delivery rate: 9 m³/h -Max. Delivery head: 22 m -Price: per piece -Number: 1 pieces -Dimensions: 250/210/H555 mm -Weight: 37 kg/piece
Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown
Digital scale for press brake, edging bench, guillotine shears ... Glass scale, glass measuring stick, rule, digital display, measuring stick, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -from: Hammerle AP 100 press brake -Length unit: 420 mm -Number: 2x available -Price: complete -Dimensions: 550/80/H40 mm -Weight: 4.4 kg
High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.64 kW -Volume output: approx. 45 m³/min -Connection air duct: 285 x 140 mm -Number: 2x fan available -Price: per piece -Dimensions: 390/340/H340 mm -Weight: 12 kg
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 2870 rpm -Volume output: m³/h -Pressure increase: Pa -Connection inlet: Ø 270 mm (without nozzle) -Connection output: 100 x 140 mm -Number: 1x fan available -Price: per piece -Dimensions: 540/400/H775 mm -Weight: 40.5 kg
High-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 0.12 kW -Speed: 2780 rpm -Volume output: 252 m³/h -Pressure increase: 240 Pa -Inlet connection: Ø 142 mm -Output connection: 56 x 52 mm -Quantity: 1x blower available Price: per piece -Dimensions: 270/180/H160 mm -Weight: 4.8 kg
High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.56 kW -Volume output: approx. 45 m³/min -Connection air duct: 285 x 150 mm -Number: 2x fan available -Price: per piece -Dimensions: 380/380/H330 mm -Weight: 15 kg
Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -electric heating -Manufacturer: Schniewindt -Type: 97/DF 15 -Power: 15 kW -Connection: DN30 in stainless steel -permissible operating pressure: -centrifugal pump -Manufacturer: Tamel 2.2 kW -Number: 2x systems available -Price: per piece -Dimensions cabinet: 940/740/H1870 mm -Weight: 406 kg
Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg
Differential pressure sensor -Type: QBM66.203 -for air and non-aggressive gases -output signal proportional to the pressure difference Technical specifications: -Output signal: 0...10 V DC -2 measuring ranges: 0...1500 Pa or -0..3000 Pa -Operating voltage: 24 V AC or -13.5...33 V DC -Power consumption: 0.5 VA -Connection: 3-wire -Protection class: IP42 -Weight 0.2 kg
Pressure-tight clamping connection, formwork accessories, KRASO clamping connection -monolithic connection of the vulcanized KRASO locking disc -Easy installation -No assembly on site -simple closure of the clamping point -no complicated gluing of the sealing plugs -no labor-intensive rework -absolutely watertight clamping point -Tested to be watertight inside and out -from company liquidation -Total length: 300 mm -1 wire mesh box approx. 350 pieces -Weight: including box 142 kg
maximum number of results exceeded
please refine your search
