straight used for sale

Actuator, Standard Actuator, Straight, 10 pcs EUCHNER BETAETIGER-P-G 059226 safety switch actuator NP / GP / TP Material: stainless steel Other quantities on request ! New ! Dimensions ( Actuator ): 83 x 19 x 3 mm Dimensions ( Packaging ): 130 x 80 x 30 mm

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good

wire diameter range: 2,0 - 6,0 mm cutting length: up to 500 mm suitable for Round- Profil- and Flatwire; ready for operation

Machine is been partly reconditioned in 2014 wire diameter range: 4,0 - 10,0 mm cutting length: up to 3.000 mm wire feeding speed: 90/130 mtr./min.; ready for operation

wire diameter range: a) up to 800 N/mm² = 6,0 - 15,0 mm b) up to 1200 N/mm² = 6,0 - 12,0 mm c) up to 1400 N/mm² = 6,0 - 11,0 mm cutting length: max. 14.000 mm wire feeding speed: 22 - 120 mtr./min. machine is been partly reconditioned and new painted; very good

Wire diameter range: 4.0 - 10.0 mm section sections: up to 4,000 mm feed speed: 90 / 120 mtr./min; ready for use

wire diameter range: 8,0 - 12,0 mm cutting length: up to. 5.500 mm wire feeding speed: 70 - 100 mtr./min. Straightener with hyperbolic rolls; good

Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min. machine has been completely repainted; very good

pressure:150 t total power requirement:20 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:8800 x 1800 x 2200 mm Pressure adjustment via rotary control infinitely adjustable:15-150 t Cylinder diameter:100 mm Press speed (infinitely variable via joystick):0-9,9 mm/s servo motor:2 kW Cooling unit:1 kW Oil tank (under table):350 l Oil cooling (electric):1 kW (max)

pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

wire diameter range: 1,0 - 4,0 mm cutting length: up to 2.000 mm wire feeding speed: 5 - 90 mtr./min; ready for operation

Tape straightening machine with feed roller pair, upper half hydr. foldable, roll width max. 320 mm, rollers 60 mm, otherwise see pictures

Rail press ARNOLD, with foerder rollers

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

Carrousel lathes FKD 40 CNC with Y axis and CNC swivel head (A axis) Faceplate diameter 4000mm Rotating diameter: 8000mm Rotating height: 3000mm Ram: 300mm x 300mm Stroke: 3000mm X axis: travel distance 5000mm Z axis: travel distance 2000mm Y axis: travel distance 6000mm W-axis: travel distance 1500mm C-axis in faceplate-table A axis in milling head Control unit: Siemens 840 Dsl Tool changer: 60 pockets PickUp Station: 5 pockets

Band width - 280 mm Thickness 3 mm Setting rollers suit 5-reel 2, all diameter 60 mm Control actuator, band storage adjustable from 0, 5 s â 15 s video available Dimensions 80 x 60 x 140 cm more info on request

Band width 250 mm, stuffenlos adjustable speed Btto 600 kg

Bandwidth of 50-500 mm Band thickness 0.8 3.6 mm Belt speed 5-40 m / min Feed rollers 2 PCs Richwalzen (80 mm) - 11 PCs Working direction optional

Rolling motor 5, 6kw GS motor with tachometer and forced-air cooling Maximum band width: 180 mm Maximum belt thickness: 4, 5 mm Number of leveling rollers: 4pcs above 5pcs below

Tech. Data VS 4 maximum strip width 250 mm, maximum advance length 400 mm Max band thickness 2.5 mm maximum band cross-section 600 mm2 Holding power sled pliers - up to 1,6 t Holding force holding pliers - up to 1 t Thrust - up 0.4 t Damping - hydraulic Feed accuracy +-0.01 mm (distance) Tech. Data VS 3 Max. Band width 160 mm maximum advance length 230 mm Max. Band thickness 2.5 mm, max. band cross-section 400 mm2 Holding force slide clamp up to 900 kg Holding pliers up to 600 kg, feed capacity 240 kg complete with instructions, control, cam

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

Hydr. Shaft straightening machine / shaft straightening press make SAUER & Sohn Dieburg type DR 15/4000 NAStraightening force at 6 bar air pressure: 15 tfor workpiece length up to: 4000 mmWorkpiece diameter: 80 mmWorkpiece cross-section flat max.: 5000 mm2Center shafts max.: 2000 mm2unzentr. Shafts max.: 2000 mm2Stroke of the straightening punch: 30 mmWeight: 800 kgOutside dimensions approx.: 4300 x 700 x 1500 mmWith- a lot of accessoriesused, good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic straightening press make EITEL type RPT 100 TYear of construction 1978Technical specifications:Press force: 100 tWorkpiece height: 200 mmWorkpiece width: 210 mmWorkpiece length: 12000 mmRam speed: 1.5 m / min.With- hand control- Roller conveyor feed with support table 7000 mm- Roller table discharge table 7000 mm- Pneumatic material discharge device- Standing desk- Spare Partsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic straightening press make MAE type S 16 RHTechnical specifications:Press force: 16 tRetraction force: 57.7 kNWorking pressure: 204 barRam speed, down: 25 mm/sRam speed, up: 68 mm/sStroke: 200mmInstallation height: 550 mmProjection: 190 mmTable depth: 320 mmTable width: 480 mmTable height: 750 mmTank volume: 120 lPump flow rate: 11.6 l (min.Tappet bore: 32mmDrive power: 5.5 kWExternal dimensions L x W x H: 1400 x 700 x 2070 mmweight approx.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

horizontal hydraulic straightening and bending press make KUNKEL type P 32Year of construction 1993Technical specifications:Maximum working pressure: 32 tinfinitely variable from: 0 - 32 tStroke of the pressure tools: 200 mmClear width pressure tool - anvil: 300 mmCasters:4including 2 rollers on extendable barswith outer distance: 3000 mmExternal dimensions approx. H x W x D: 1160 x 1200 x 1400 mmDrive power: 5.5 kWPump capacity: 280 kg/cm2Weight approx.: 1400 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Manual bending machine make REINHART München type UBM IIMachine -No: 127Bend length: 500 mmBending capacity at 37 kg strength: 1.0 mmBending capacity at bending length 300 mm: 1.5 mmBending capacity at bending length 200 mm: 2.0 mmOpening width of the upper beam: 20 mmDepth of the back stop: 300 mmOutside dimensions approx: 900 x 600 x 280 mmWeight approx: 150 kgWith- many different additional tools- manual backgaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening plate measuring plate measuring plate reinforced plate made of steel casting used. Length approx. 3560 mm Width approx. 985 mm Height approx. 910 mm (adjustable) with 5 feet Casting tear ingenuous plate with height-nivelable feet, support ball-bearing Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Manual swivel bending machine make HERA type U IIIYear of construction 1974Technical specifications:Bending length: 1540 mmgreatest sheet thickness at 40 kg: 4.0 mmSmallest shelf height with the greatest sheet thickness: 20 mmOpening width of the upper beam: 350 mmAdjustability of the lower and bending beam: 125 mmlargest diameter when rounding: 250 mmExternal dimensions approx .: 2500 x 1000 x 2000 mmWeight approx: 1000 kgWith- counterweight- Hand wheel for height adjustment of the upper beamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual swing bending machine Fabr. Schechtl type UKV 2002 x 1 Masch. -No: 6412 Year of construction 1995 with segmented bending tools Technical specifications Working width 2000 mm Max. Tin thickness steel 1.0 mm Max. Sheet metal thickness ALU 1.5 mm Max. Tin thickness Va 0.70 mm Opening width of the upper wang approx. 100 mm Outer dimensions L x B x H 2600 x 800 x 1200 mm Weight approx. 625 kg with - split tools up and down - Weight equalization for top and bending cheek - Foot pedal for close the top cheek - Scale for bending angle left and right - Manual background Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 120

diameter range 1-8 mm cutting length 3000 mm speed - meters/min 13-56

diameter range 7-14 mm cutting length 3000 mm speed - meters/min 90

diameter range 4-10 mm cutting length 3000 mm speed - meters/min 130

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

pressure: 3 t throat: 0 mm stroke: 200 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1/ Straightener RSTM-SU-W 60/7/700 NIR Built in 1999, producer. PBK Automation GmbH Vöhringen, DE Direction of work - from left to right Passage width - 720 mm Belt width from 50-700 mm Strip thickness from 0.4-3.0 mm Strip cross-section max. 1750 mm2 Feed roller diameter - 80 mm Straightening and correction roll diameter. 60 mm Feed speed - max. 30 m/ min Feed rollers - 2 Straightening rollers 7 Correction roller - 1 Drive power 3 kW Colour RAL 6011 - lime green - Upper straightening head half can be folded up pneumatically in a V-shape for cleaning purposes - Infeed of the upper feed roller is also pneumatic - Adjustment of the straightening block is done via socket wrench Drive - via three-phase geared motor with frequency converter - Single-axis positioning control incremental CPS 20 Freely programmable CNC positioning control - Simodrive 611 Tech ...

pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 2500 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t distance between columns: 1500 mm stroke: 380 mm working feed: 2,47 mm/sec : 700 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 1740 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar table-size: 1740 x 1396 mm total power requirement: 2,2 kW weight of the machine ca.: 2060 kg dimensions of the machine ca.: 1,74 x 2,07 x 2,04 m This 100 ton straightening press has a manually movable portal and is exclusively made in the Netherlands. Thanks to the movable portal and cylinder you can easily reach every point of the ‘to be pressed’ surface. The design of this portal press makes it possible to place heavy material on the large working table with a crane and to slide the portal over the material when the pressing starts. The quality of these hydraulic straightening presses is very high. Furthermore, the hydraulic unit is equ ...

pressure: 50 t distance between columns: 2700 mm stroke: 800 mm measuring system: Absolutwertgeber control: Siemens Simatic S7 400 table length: 2500 mm table width: 1600 mm : 150 table height: 1320 mm work height max.: 1580 mm : 800 total power requirement: 15 kW Tool clamping upper and lower part: screwed manual tool change The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mm width: 500 mm table height: 20 mm Total weight, approx.: 60 kg dimensions of the machine ca.: 0,80 x 0,50 x 0,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 600 mm width: 500 mm table height: 20 mm Total weight, approx.: 60 kg dimensions of the machine ca.: 0,60 x 0,50 x 0,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t distance between columns: 2560 mm stroke: 400 mm working feed: 3,8 mm/sec piston stroke: 300 mm : 700 mm adjustment of press crosshead: 2000 mm slide adjustment -horizontal: 3000 mm tank capacity: min 30 l feed speeds: 9 mm/min pressing speed: 2 mm/sec return speed: 15 mm/sec total power requirement: 10 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 3,5 x 3,05 x 2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.