straight used for sale

pressure:200 t distance between columns:2900 mm stroke:800 mm dimensions of the machine ca.:3300 x 2700 x 3100 mm Table dimensions:2500 x 2000 mm :4000 mm :33 mm/sec :33 mm/sec distance table - lower edge of ram:1100 mm table height over floor:750 mm :2300 mm return capacity:25 t total power requirement:15 kW Oil Cooling:1 kW stroke speed:18 mm/sec down speed:2 - 10 mm/sec :200 l table plate:100 mm distance between columns:2400 mm open height:1000 mm weight:9 t Table Height:750 mm :34 Lt./min. Impact leper extension removable (200 mm long):550 ? Table top flattened, with or without T-slots:7900 ?

pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec :67 Lt./min. Total weight, approx.:26 t

pressure capacity max.:50 t

pressure capacity max.:25 t

Straightener, strip straightener with variable gear motor LENZE Type 11.712.02.10 Output speed gear motor 12 to 72 rpm infinitely variable Torque 80 to 40 Nm Straightening roller speed 19 to 115 rpm. Straightening roller width 520 mm Straightening roller diameter 90 mm Number of straightening rollers Total 4 pieces Motor power 0.37 kW Mains connection 380 Volt, 50 Hz - infinitely variable speed adjustment via handwheel on gear motor - Drive via open gear drive straightening rollers Upper part mechanically for adjustment - on stable metal substructure straightening machine was used for cardboard Space requirement L x W x H 630 x 460x 1060 mm Weight approx. 160 kg good condition; used

IN STORAGE - Capacity: 38 mm ? 152 mm dia. bar Length: 2.4 m ? 11.5 m 38 mm ? 216 mm dia. tube Speed: 20-180 FPM at 17° Pass line: 927 mm Rolls: 1 straight roll dia. 508 mm ? 660 mm width Roller bearings Drive: 150 HP motor, 400/1200 RPM, 250 V DC Gearbox: Total ratio 5.13:1 high 15.4:1 low sheave ratio 2:1 Dimensions: 6400 x 5530 x 184 ? L x D x H Features: Trough & pusher buggy Entry guides Total line length: 30 m

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

920 mm straight piece + 30° roles curve left as a combination Rolling curve: 30° serial link Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm Straight piece: Length: 920 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Drive: round curved belt + straight piece double-sided edge guide included 2 double support included Height role OK 800 +/-100 mm Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 30° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir  ...

1,350 mm straight piece + 90° roller curve right as a combination Rolling curve: 90° right running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1350 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece double-sided edge guide included Support: optional, 3 piece double support Height role OK 800 +/-100 mm Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES KW: 0,25/S1 Conveyor speed m / s: 0,3 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Ve ...

90° roller curve left + 1.600 mm straight pieces with chains above slide as a combination Rolling curve: 90° linkslauf Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,600 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm including 90° pull chains, chain clearance 450 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Guide: both sides included as shown Support: optional, 3 piece twin supports Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr ...

90° roller curve left + 1,875 mm straight piece as combination Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Int ...

90° curve roller + 1,350 mm straight piece as combination Rolling curve: 90° right running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1350 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optional, 3 piece double support Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Conveyor speed m / s: 0,3 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontak ...

90° roller curve right + 650 mm straight pieces with chains above slide as a combination Rolling curve: 90° clockwise rotation Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 650 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm including 90° pull chains, chain clearance 450 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Siding: on both sides including Supports: 3 piece double support including Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Conveyor speed m / s: 0,3 scope of delivery: including side guides without supports Für eine  ...

90° curve roller + 750 mm straight piece as combination Rolling curve: Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 750 mm Usable width: 400 mm Total width: 450 mm 10 rolls, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Siding: on both sides including Optionally available: 2 piece double supports Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tele ...

Straight grinder, straight grinder, belt grinder, internal cylindrical grinder, angle grinder, cut-off grinder, die grinder -Manufacturer: Suhner, straight grinder type USD 12 -Power: 750W -Speed: 12000 rpm -Total dimensions: 480/100/H80 mm -Weight: 3.5kg

Straight grinder, straight grinder, belt grinder, internal cylindrical grinder, angle grinder, cut-off grinder -Pneumatic straight grinder -Length: 520 mm -Dimensions: 800/130/H130 mm -Weight: 5.5 kg

Offer via gebr. Suhner straight grinder type USC 9-R You can easily use the SUHNER USC 9-R straight grinder on high or low speed. It is suitable for almost all applications with infinitely variable speed control. The fields of application include fine milling and grinding work. Specifics Work in the high and low touring area Continuous speed regulation 4000 - 9000 rpm. 500 watts Electrical soft start

Straight grinder, straight grinder, belt grinder, internal cylindrical grinder, angle grinder, cut-off grinder -Power: 700 watts -220 V 3.4 A 3000 rpm -Weight including packaging: 5.5 kg

Corker BERTOLASO – Natural straight cork • Year: About 1990 • Speed: 2.500 bph • Direction: Clockwise • Single head • Natural straight cork • Safety protections.

Straight fitting, straight fitting, cutting ring fitting, 13 pieces PARKER G15LMS Operating pressure: max. 200 bar Material: Brass Tube outer diameter: Ø 15 mm width across flats: 24 / 27 mm with nut and cutting ring New ! Also available in other quantities ! dimensions ( single screw connection ): 55 x 31 x 27 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Straight fitting, straight fitting, compression fitting, 10 pieces SERTO SO 41021-15 018.1020.150 operating pressure: max. 40 bar Material: brass pipe outer diameter: Ø 15 mm width across flats: 22 / 24 mm with nut and cutting ring New ! dimensions ( single screw connection ): 62 x 27 x 24 mm Dimensions ( packaging ): 180 x 100 x 70 mm

Straight cutting ring fitting, straight fitting EMB G 28 L ES Material: stainless steel ( 1.4571 ) Tube outer diameter: Ø 28 mm ( 28L ) Thread: M36 x 2.0 width across flats: 41 mm with nut and cutting ring New ! Dimensions: 65 x 47 x 41 mm

Straight fitting, straight nozzle, compression fitting, 4 pieces SERTO SO 41021-22/18 Operating pressure: max. 40 bar Material: Brass < br />Pipe outer diameter: Ø 22 / 18 mm width across flats: 30 / 32 mm with nut and clamping ring similar LANDEFELD KG 22 MS Other quantities on request ! New ! Dimensions ( single screw connection ): 74 x 37 x 30 mm Dimensions ( packaging ): 135 x 90 x 60 mm

Straight fitting, straight nozzle, compression fitting, 8 pieces SERTO SO 41021-15 018.1020.150 operating pressure: max. 40 bar Material: brass pipe outer diameter: Ø 15 mm width across flats: 22 / 24 mm with nut and cutting ring Other quantities on request New ! Dimensions ( single screw connection ): 62 x 27 x 24 mm Dimensions ( packaging ): 90 x 85 x 60 mm

Straight globe valve, straight-through control valve, reciprocating valve SAMSON 3354-00103004 GMV3197 5.6 - 8.0 bar PN 16 DN 25 Flange: Ø 115 mm 24 V DC New ! Dimensions: 180 x 160 x 320 mm

Schulz roller curve 90° roller curve conveyor with driven straight section 450-390 IR1400 + 250-450-390 RA1186 Roll curve: Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1400 mm Speed: v = 0.35 m/s Straight piece: Conveying length: 250 mm Useful width: 390 mm Nominal/outer width: 450 mm incl. lateral guides on both sides rollers: plain bearing with conical plastic moulding Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 1400 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fac ...

Rolling curve 90° straight piece 830 mm Make: Transnorm Type: TS 2712 Year of construction: 2005 Project: N124592 Conveyor angle: 90° Width: 600 mm Outer width: 665 mm Inner radius: 800 mm Division of roles: straight piece 85 mm Curve 100 mm Speed.: 0.5 m/sec Optional: 3 supports Shipping weight: 120 kg on euro pallet Transport dimensions: L x W x H = 2800 x 700 x 500 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES Engine type: Franz Bangert Getriebemotor scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung  ...

4x NUMMERATORS STRAIGHT, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

1x NUMMERATORS STRAIGHT, FORWARD, BIG No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

Brand: Bavelloni Type: Straight Line Edging Machine Model: CR 1111 Serial Number: 443041 Construction year: 1988, overhauled 2023 Air pressure 8 bar Weight: 3,5 tons Length mm: 8100 Width mm: 1500 Height mm: 3300 incl. rack increase Transport size L x W x H: 4,5 x 2,49 x 2,4 mtr Min,- max. glass thickness Min. 3 mm, max. 31 mm Min.-max glass size: min. 70 x 70 mm Max. 200 kg/ p.mtr Working speed: 0- 5 mtr/ p.min Electr. Connection: 23,8 Kw Missing parts: None, complete Documentation: Yes, NL Instruction: Yes, NL Electric scheme: Yes Parts list: Yes Number of spindles: 11 spindles Condition machine : Complete overhauled/ modernized Remaining: Complete set of wheels

Wafios straight and cut machine Extension length: 3m Decoiler 3T horizontal Year 2006

SECOND-HAND CN SANDING LINE FOR STRAIGHT AND CURVED ELEMENTS OMEF MOD. FUTURE -Loader - 2 Top Transversal Horizontal Belts - 2 Bottom Transversal Horizontal Belts - 1 top horizontal longitudinal pneumatic roller - 1 bottom horizontal longitudinal pneumatic roller - 2 Right Vertical Transversal Belts - 2 Left Vertical Transversal Belts - 1 right longitudinal pneumatic roller - 1 left longitudinal pneumatic roller - 2 Orbital Sanders - CE rules - Year 2000

Straight reducer fitting, reducer, cutting ring fitting, 10 pieces PARKER GR15/12LMS Operating pressure: max. 200 bar Material: Brass Tube outer diameter: Ø 15 / 12 mm width across flats: 27 / 22 mm with nut and cutting ring New ! Also available in other quantities ! Dimensions ( single screw connection ): 52 x 31 x 27 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Straight reducing fitting, reducer, cutting ring fitting, 10 pieces PARKER GR12/10LMS Operating pressure: max. 200 bar Material: Brass Tube outer diameter: Ø 12 / 10 mm width across flats: 22 / 19 mm with nut and cutting ring New ! Also available in other quantities ! Dimensions ( single screw connection ): 50 x 25 x 22 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Straight screw-in fitting, screw-in fitting, cutting ring fitting, 8 pieces PARKER GE15LR1/2KEGMS Operating pressure: max. 200 bar Material: Brass Tube outer diameter: Ø 12 / 10 mm width across flats: 24 / 27 mm with nut and cutting ring New ! Also available in other quantities ! Dimensions ( single screw connection ): 50 x 25 x 22 mm Dimensions ( packaging ): 125 x 60 x 50 mm

Swivel fitting, straight, 15 pieces ERMETO DVGE-M6-PLM Pipe outer diameter: Ø 6 mm Thread: M14 x 1.5 Width across flats: 12 / 14 / 19 mm New Dimensions ( single screw connection ): 57 x 19 x 22 mm Dimensions ( packaging ): 150 x 75 x 55 mm

Straight compression fitting, compression fitting, screw-in fitting, 8 pieces LANDEFELD 7x KGE 1212 KON MS Pipe outer diameter: Ø 12 mm < br /> 1x KGE 1210 KON MS Pipe outer diameter: Ø 10 mm screw-in thread: R 1/2 ( inch, conical ) Material: Brass 19 / 22 mm, 17 / 22 mm with nut and clamping ring Other quantities on request ! New ! Dimensions ( single screw connection ): 48 x 25 x 22 mm

Straight threaded piece, 5 pieces PISCO NSC0850-03 Material: stainless steel hose diameter ( outside x inside ): 8 x 5 mm thread ( outside ): NPT 3/8 ( inch ) thread union nut: M 12 x 1 spanner width: 14 / 17 mm with union nut ! Other quantities on request New ! Dimensions ( single threaded piece ): 32 x 19 x 17 mm Dimensions ( packaging ): 90 x 60 x 50 mm

Straight threaded piece, 5 pieces PISCO NSC1065-04 Material: stainless steel hose diameter ( outside x inside ): 10 x 6.5 mm thread ( outside ): NPT 1/2 ( inch ) thread union nut: M 14 x 1 width across flats: 17 / 21 mm with union nut ! Other quantities on request New ! Dimensions ( single threaded piece ): 38 x 24 x 21 mm Dimensions ( packaging ): 90 x 60 x 50 mm

Bow handle, straight, 17 pieces PAGUS Grip length: 210 mm Handle height: 58 mm Cross-section: 17 x 26 mm 2x female thread: M8 x 1.25, depth: 20 mm Thread spacing: 192 mm Material: aluminum, powder-coated, color: black Other quantities on request ! New ! Dimensions (single handle): 210 x 26 x 58 mm

Bow handle, straight, 11 pieces PAGUS Grip length: 125 mm Handle height: 48 mm Cross-section: 13 x 20 mm 2x female thread: M6 x 1.0, depth: 15 mm Thread distance: 112 mm Material: aluminum, powder-coated, color: black Other quantities on request ! New ! dimensions (single handle): 125 x 20 x 48 mm

Straight grinder, extra-low voltage tool FEIN MSh 706 0.28 KW 28000 rpm 42 V 1AC 50 Hz Collet: max. Ø 8 mm used, tested, similar in picture ! Dimensions ( without cable ): 360 x 70 x 70 mm

Straight grinder, extra-low voltage tool FEIN MSh 748 0.65 KW 28000 rpm 42 V 1AC 50 Hz Collet: max. Ø 6 mm used, tested ! Dimensions ( without cable ): 540 x 82 x 82 mm

Straight jigsaw, reciprocating saw, saw SEW, SPECIAL POWER TOOLS NEUSTADT ST 250 0,0,5 KW 230 strokes / min 220 V 1AC 50 Hz Pipe diameter: max. Ø 250 mm Tool holder: 50 x 28 mm hole spacing: 30 mm, 2x M8 x 1.25 approx. 3.0 m connection cable New ! Dimensions ( without cable ): 560 x 185 x 220 mm

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Straight handle, 10 pcs HANSA FLEX BK ALU HANDLE SW 9 SW 9 Length: Ø 150 mm Ball diameter: Ø 20 mm flange: Ø 26 x 15 mm Material: Aluminum New !br /New ! dimensions (single handle): 168 x 26 x 20 mm Dimensions (packaging): 168 x 26 x 20 mm

Spade drill bit holder, spade drill bit, drill bit, with cylindrical shank, straight grooved, 3 pcs AMEC, ALLIED MACHINE & ENGINEERING 1x 27000S-20FM Diameter: Ø 13 - 17, 50 mm maximum drilling depth: 295 mm Overall length: 373.9 mm shaft diameter: Ø 20 mm, shaft length: 50 mm 1x 25030S-40FM diameter: Ø 36 - 47 mm maximum drilling depth: 349,3 mm Overall length: 471.6 mm shaft diameter: Ø 40 mm, shaft length: 70 mm 1x KARNASCH® 221020.03870.0155 diameter: Ø 15.5 - 17.5 mm maximum drilling depth: 387 mm Overall length: 466 mm shank diameter: Ø 20 mm, shaft length: 50 mm used, tested ! Dimensions ( packaging ): 500 x 100 x 50 mm

2 x Gebr. Straight stair formwork - The price is per formwork - Sharp-edged version 18 inclines (adjustable) = - Slope heights: 16.5 to 20 cm - Tread width : 23 -32 cm Adjustable stair width: 0.00 to 1.50 m