129,272 used machines on RESALE, but how to find them? Machine Search
Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm
GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...
Available for sale 2 x NEVER USED Leroy Somer Automatic Voltage Regulator R713. The 3F R713 or R723 modules are used in connection with a R200 series regulator for equalizing the voltage of an alternator with that of the network before coupling, when the installation operates automatically or when manual equalization of these voltages is not possible. This prevents excessive current caused by coupling a network to the machine when both are not at the same voltage. This difference in voltage is usually due to fluctuations in the network voltage because the alternator is regulated at a constant voltage except for cases of voltage droop). On some networks these fluctuations can reach ± 10%. Equipment never used and in good working conditions. Consumption: < 2VA Response time: < 300 ms Dissipated power: < 1W Temperature Shift: 1% of Un for delta T ambient variing from -20° to 2 ...
Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting
Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine no.: 7.0176 Year of construction: 1987 Weight: 11t General / technical data: Portal-6spindle automatic lathe with measuring device and automatic feeding Spindle dividing circuit: 300mm Number of longitudinal slides: 6 Number of cross slides: 2 gr. cross slide stroke: 60mm gr. longitudinal slide stroke: 125mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Stepless 1.95 – 78 sec. Low time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20kW; Feed rates 8kW Installation area: approx. 1720 x 4700mm Remark: The machine cannot be converted for bar work. Equipment: – 1 creep gear drive for set-up operation – 1 automatic central lubrication device – 1 coolant device with lines and pu ...
8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves
We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.
Neri BL400 VTE tamper-evident labeller for the application of 2 self-adhesive tamper-evident seals on the closure points of formed cartons and 1 vignette/bollini label or similar on the upper face of the carton. Specifcation: - Labelling machine balcony construction stainless steel executed. - Electrical cabinet on machine board, Siemens S7-300 PLC controller with HMI touch screen - Laetus Argus 6012 bar code reader - Easy access from behind to electrical and mechanical parts - Positive transport of cartons with toothed belts. - Upper conveyor belt to keep carton stable during tamper evident seals application - Twin horizontal conveyor belt for products bunching at in-feed. - Mechanical timing device to dispense cartons on the main toothed conveyor belts. - Label dispensing with stepping motor drive. - Automatic work speed synchronization of motors. - Label length self-le ...
Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg
Automatic filling plant Logdos Späth GmbH Type K-DOS. F/AL 40/ EX EX protected mobile on wheels Programable X/Y axis and pallet image Very good condition, directly from production!
Graham labeler COUV 128-40 with tripod, Y.O.M. 2001
Inv. Num. : 6521 Type: Compact A35 Producer: Kovosvit Generated: 2005 Parameters: bar diameter: 35 mm Maximum main spindle power: 7.5 kW Maximum spindle speed: 7000 1/min Number of CNC controlled axes: 8pcs Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3450 kg Equipment: Bar feeder (3 meters) LNS Sprint 555 Part of the sale: Collets Auxiliary head Polished holders VDI25/ER32 Axis tool holder VDI25 Straight and angled power tool holders Equipping the machine with tools (square 16x16 mm) The feeder is equipped with guide channels, pushers and reducing bushes
KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.
used
Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right
Machine Details Stock-No. 1105-03889 Type of machine CNC Lathe Make FEMCO-ASTRHAL Type 20-60 Year of manufacture 1989 Type of control CNC Storage location HAGUENAU Country of origin taiwan Delivery time IMMIDIATELY Freight basis ex stock Price Technical details turning diameter 540 mm turning length 600 mm control Fanuc 10 T turning diameter over bed 540 mm turning diameter over slide 255 mm rapid traverse 15 (X/Z) m/min power capacity 11-15 kW Tool Numbers 12 chip conveyor 1 kW Additional information CNC-lathe clamping tool, main spindle, power chuck TAILSTOCK CHIP TANK cnc control fanuc 15 T 42 DIAMETER HOLE TTHE SPINDLE 11/15 KW 3500 RPM
Libra / labeler Bizerba GV 7000, built 1999, in a very good used and functional condition. Fully automatic scale with labeler / price printer, programable, feed and feed belt. Dimensions W/D/H 260/65/170 cm. Operating voltage 230 volts, compressed air connection 6 bar required. Workshop-tested, ready for immediate use. More on request.
Consisting of: 1 Fully automatic depalletizer, Krones Palmaster 1 Fully automatic palletizer, Kettner Pressant duplex 1 Pallet magazine 1 Pallet control Pallet turning stations Pallet conveyors Protection fence Further information: Equipped for Euro-pallets. With Siemens S7 control. Year of construction: 1995 The line is currently in production. A viewing is possible. Composed of: 1 Fully automatic depalletizing, Krones Palmaster 1 Fully automatic palletizing, Kettner Pressant duplex 1 pallet magazine 1 pallet inspection Turning stations / corner converters Pallet transporters Protective fence Further information: Equipped for Euro pallets. With a Siemens S7 controller. Year of construction: 1995 The line is currently still in operation. A visit is possible by arrangement.
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...
Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide
Thread cutting gear Pick-up device partially revised
Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...
Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer
Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle
Product number: 2783 Type: Titaan 2-90 Serial number: HTN10220019 Year of construction: 2023 Chamber: 840 x 890 x 220 mm Seal bar: 2 x 840 mm Cycle: 30 - 50 sec Vacuum pump: Busch 300 m³/hr Compressed air: 6 Bar, 100 Nl/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2450 x 1100 x 1150 mm Weight: 850 kg Automatic lid and outfeed conveyors Hellings conveyor Type: 12980-10 Serial number: 790311 Year of construction: 2021 Belt width: 600 mm Length: 3000 mm Henkelman diptank Type: 200A Serial number: H0D20220008 Year of construction: 2022 Heating: electric Usable space: 575 x 1100 mm Emersion depth: 200 mm Cycle time: 22 sec Compressed air: 6 Bar, 50 l/min Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 2500 x 1350 mm Weight: 310 kg
Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...
Schuette SG 18-6 with gantry loader as feed lathe alternatively conversion possible as a rod lathe, incl. spindle stop setup Location 3+4 with extended stroke CNC cross slide on layer 5 Etc. Machine is ready for use and can be visited under electricity loading device is not currently connected.
Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...
Machine type: Automatic band saw - Horizontal Manufacturer KASTO Type KastoTwin A4 Year of construction 2002 Country of origin Germany Delivery time by arrangement Freight base from location Technical details Cutting diameter 400mm Saw blade length 5,090mm Cutting width 1.3mm Cutting range at 90 degrees: around 400mm Cutting area at 90 degrees: square 400 x 400mm Smallest diameter 10mm Smallest section length 6mm Feed length 750mm Cutting speed 20 - 110m/min Clamping pressure 20 - 60bar Saw blade dimensions 5,090 x 41 x 1.3mm Total power requirement 7.0kW Machine weight approx. 1850 kg Space requirements approx. 2400 x 2500 x 1700mm
Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...
FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...
- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l
Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past
Index HE 25 with rod feed hydraulically controlled with long turning device
Böllhoff Uniquick Vario automatic screw feeder UNIQUICK Feeder Type 360 Plastic sorting pot ∅ 360 mm Quiet and surface-friendly conveying Optimal spiral dimensioning depending on the material to be conveyed (width and height) Integrated and controlled chicane High wear resistance Uniform flow rate due to amplitude control In a soundproofed housing on a frame Web width: 20 mm Head Ø of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Tape Bunker Bunker trough, chute: stainless steel Strap: white with FDA approval Filling volume: 10 litres Max. filling weight : 35 kg Drive: AC gear motor 230V/50Hz Bunker with innovative drive to ensure metered, quiet and part-friendly feeding of screws and connecting elements. UNIQUICK Multi Modularly expandable 3-fold crossover Distributes the tested screws to three st ...
BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...
CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg
Mechanical high-efficiency automatic press Pressing force: max. 150kN Ejection force: 50kN Die support in pressing position: max. 150kN Return force of lower punch: max. 32kN Closing force of upper punch: max. 12kN Upper punch stroke: 90mm Upper punch adjusting travel: 60mm Stroke rate: 8...40strokes/min
Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...
various accessories / spare parts for Tornos AS 14
CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg
MAX DIAMETER OF ROD: 100 MM MAX CUTTING DIAMETER: 552 MM MAX TURNING LENGTH: 1.195 MM TURRET: 16 ROTATION SPEED: 2800 RPM CONTROL: FANUC 32 B INCLUDES: AUTOBLOK STEADY SLU-3.1 – ZS CAPACITY: 20-165 MM AUTOMATIC FEEDER FOR BARS BREUNING – MOD. MUK 10016-II
PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...
GILDEMEISTER TWIN 65 CNC automatic lathe was built in 2005 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine is used for precise, multi-axis machining of workpieces with complex geometries. To increase overall production efficiency, a combination of two spindles and two 12-position turrets with excellent technical specifications are used inside the large working area. Both spindles feature a C-axis with a high indexing accuracy of ± 0.002 mm, which facilitates complex machining operations that require precise positioning of the workpiece. All this is complemented by an intelligent SIEMENS CNC control with an intuitive interface. The GILDEMEISTER CNC turning center weighs 10000 kg. Technical specifications of the GILDEMEISTER TWIN 65 CNC lathe General data - number of axes: 8 (X1, X2, X3, Y1, B, Z1, Z2, Z3) - feed in the X1/X2/X3 axis: 300/180/175 mm - feed in the Y1/B ax ...
BIESSE - Multi-spindle drilling machine Model BEAVER Year 1982 Manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm horizontal Drilling motor 2.2 kW Vertical drill motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs. pneumatic answers with kSsi control levers Weight 865 kg L x W X H 280cm x 150cm x 150cm
maximum number of results exceeded
please refine your search
