storage pallet used for sale

Construction site price: approx. 9,000 pieces open fronted storage stacking boxes, metal, similar type: 14/7-2, approx. 50 x 30 x 20cm, with support rod - used - : Price (net) per piece from location: Price for complete acceptance: 9.-€ (net) / piece. For purchase of 10 pallets of 40 pieces: only 15.-€ (net) / piece On acceptance 33 pallets (truck full) of 40 pieces each = 1,320 pieces: only 12.-€ (net) / piece For purchase of 66 pallets of 40 pieces: 10.-€ (net) / piece Manufacturer: unknown, Type: similar to SSI Schaefer 14/7-2 l (for painted) Dimensions: 50cm deep x 31cm wide x 20cm high Dimensions inside: approx. length: 450 x width 300 x height 190mm Quantity: approx. 9,000 pieces Green With support rod Material: Sheet steel Load: Single: approx. 120kg Stack: 1.200kg Content: approx. 26L Weight: approx. 4kg Current inventory; approx. 70  ...

We sell 1 x IBM DS8910, 5333-994 disk storage system In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all  ...

We sell 4 x IBM FS7300 NVMe flash systems In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manuf ...

Storage tank

To supply & deliver 6 units of 8MT s/steel Vertical Chemical Storage Tank Tank Material: Stainless Steel 304 6.0mm thk 1B plate Tank Cover Material: Stainless Steel 304 3.0mm thk 2B plate [2 Side] Tank size [Diameter]: 1700mm x 3500mm[H] with 150mm cone. Tank Support: 4 nos 80mm & 200mm x 650mm[H] SS275JR M/S Channel Tank Support Ring: a] 3 nos 50mm x 50mm x 5thk SS275JR M/S b] 2 nos dia of 2" SS304 ScH40 pipe c/w S/Steel 10k flanges c] 11 units Internal dia 12mm SS304 step ladder Drive system: 5.5HP x 415V IE3 4 Pole Flange Mounter Motor c/w TPG helical gear reducer with grease vertical mounting. Model: GVS-50-400-10S Torque 233NM Complete with direct drive stirrer system RPM: 145 1 set of 50mm x 100mm x 5thk SS275JR drive system frame. 1 set of 2" S/Steel 304 main drive shaft 2 sets S/Steel standard stirrer channel blade c/w bush 1 set of 2" S/Steel 304 top ...

Properties Volume 7300 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3550 mm Height 2720 mm Diameter width 2550 mm Weight 450 kg Surface inside IIID Surface outside IIID marbled Description Topsoil: curved bottom 2 crane eyes Upwardly drawn surround with threaded nozzle DN 50 for airlock Tank cylinder: Level indicator with bar and scale with standpipe valve DN 15 Manhole 430x330 mm Sample tap DN 20 Ladder hook at the top Clear drain with inclined seat DN 50 Subsoil: curved bottom forward-drawn outlet surround Forward-drawn floor bead with disc valve DN 50 3 shell feet with calottes - height adjustable

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

Ref.Nr. 00791 Name of the system Blechturm Flat goods storage Manufacturer: Heitling GmbH & Co. Profil systems today Model HEI – TECHMAT - II Built in 1999 Payload/tray 34 kN Number of compartments 59 Storage capacity 2006 kN Sheet format 2000x4000mm Stacking height 55/70 Width: approx. 7,500 mm Depth: 5,000 mm tower + 5,500 mm with extended cassette Height: approx. 7,500 mm Deadline by arrangement - immediately Condition To be viewed under power Currently used next to a laser cutting system

Features Volume 40000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7500 mm Height 5800 mm Diameter width 2800 mm Surface inside 2B=IIIC ground Surface marbled on the outside Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 central to DN 40 Threaded Socket DN 50 Fermentation valve DN 50 Check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50 and outlet pipe DN 50 with flange 4 calotte feet, heigh ...

Features Volume 10380 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 6500 mm Height 5500 mm Diameter width 1500 mm Surface inside 2B=IIIC ground Surface marbled on the outside Weight 1000 kg Description Topsoil: Clapper bottom 2 crane eyes Threaded weld-on nozzle central DN 100 to DN 40 with threaded nozzle DN 50 with airlock valve DN 50 and check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 420x320 mm Sample tap DN 15 1 ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50, flush with the tank wall forward-d ...

1000 ESD open-fronted storage bins new Manufacturer: Transoplast Dimensions: 170x105x75mm Colour: black Stackable Negotiation price: € 4.00 net from stock Selling price per box: € 3.50 net from stock 20 pieces per carton Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Qty. 1 Second-hand plate storage system Mfc.: Kasto Maschinenbau GmbH Type: UNITOWER B1.5 Built: 2018 Still in operation! Number of storage spaces: 86 Pallets size: Usable dimensions: 3000 x 1500 x 90 mm – L x W x H External dimensions: 3290 x 1616 x 160 (70) mm – L x W x H Payload per pallet: 1500 kg Use for surface elements made of wood, polycarbonate, etc. Only about 300 movements have taken place since 2018 - one movement takes about 2 minutes. The system is regularly serviced by the manufacturer. Speeds Hoist: 16.0 m/min. Pull and push device: 20.0 m/min. System dimensions approx.: 8855 x 5900 x 5730 mm – H x L x W

height: 820 mm work height max.: ca. 2250 mm weight: 2,6 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approx. 500 pieces, storage box / tray, SSI Schaefer, type MF 4060 (40 x 30 x 6cm) - used - : Price per unit ex location (net): 2,50 € We reserve the right to purchase a minimum quantity! Manufacturer: SSI Schaefer Type: MF 4060 PP Year of manufacture: unknown External dimensions L x W x H 396 x 297 x 60 mm Internal dimensions L x W x H 366 x 267 x 42 mm Usable height in stack 27 mm Capacity 4.1 litres Content load (max.) 20 kg Color: Blue Condition: good, Available: immediately Location: CZ, Bor, later camp Frankenberg / Saxony

Membrane accumulator with fastening, accumulator ORSTA 25/16 018268204 TGL 10843 Content 25 l permissible Operating pressure 160 bar permissible Operating temp. 80°C Another 25 l - Membrane storage tank from ORSTA under HY 1033 ! Used, as good as new Dimensions 550 x 400 x 360 mm

Diaphragm accumulators, bubble accumulators, pressure accumulators OLAER IHV 4-350-90 ( IHV4-350-90 ) Content 4 l Pmax: 350 bar used, tested ! Dimensions 430 x 170 mm

Membrane accumulators, bubble accumulators, pressure accumulators ORSTA 1/16 0424780 TGL 10843 Content 1 l permissible Operating pressure 160 bar permissible Operating temp. 80°C Dimensions 220 x 117 x 117 mm

Storage containers SCHAEFER BOXES Warehouse Fix 1 720 x 480 x 300 mm made of sheet steel galvanized

Membrane accumulators, accumulators INTEGRAL ACCUMULATOR GmbH D0,75-210 075-1315-053-611 Content 0,75 l permissible Operating pressure 210 bar permissible Operating temp. 80°C spare part e.g. for TRAUB TND300 ! used ! Dimensions: 185 x 122 x 122 mm

Cable storage roll set without holder PAGUS Ø 200 x 100 mm outer diameter: Ø 200 mm inner diameter: Ø 80 mm drum width: 100 mm shaft ball bearing, thread M10 Set consists of 5 cable storage rollers ! New !' Dimensions(per roll): 200 x 200 x 130 mm

The warehouse for paints and solvents ( in barrels ) is housed inside the building and consists of 3 Departments. The warehouse complies with the applicable regulations, - Pallets of solvents can be stored on the right side. There are taxiways here - In the middle, paint buckets are stored on a shelf - On the left side, paint containers are stored on a shelf. In the containers are stirrers ( included in the delivery )

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections and suction line. Inlet and overflow, water level gauge, anti-vortex plate, etc. can be offered additionally. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

The WKS in maximum format with 250 mm extended depth and "tank extensions" for heavy and voluminous stored goods Tool cabinet with 3 Vertical pull-outs of 300 mm width with each 1,800 kg load capacity Fully assembled including 30 Bulk material trays WKH 927 with 4 each Dividers TRB 927/928 Dimensions: 1,040 b x 2,140 h x 1,300 t Curb weight: 509 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

Note: The IBCs were filled with an acid for feed (main ingredient formic acid). Is not dangerous goods according to ADR, but subject to identification according to Hazardous Substances VO. The containers are empty, but not cleaned. The scope of delivery includes: 01x Water tank, used Total width: approx. 1,000 mm Total depth: approx. 1,200 mm Total height: approx. 1,160 mm Capacity: 1,000 litres incl. tap on metal, wooden or plastic pallet Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

! KNIFE RETURNS! The WKS in maximum format with 250 mm extended depth and "tank extensions" for heavy and voluminous stored goods Tool cabinet with 3 Vertical pull-outs of 300 mm width with each 1,800 kg load capacity Fully assembled including 30 Bulk material trays WKH 927 with 4 each Dividers TRB 927/928 Dimensions: 1,040 b x 2,140 h x 1,300 t Curb weight: 509 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)

horizontal steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 10 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground for various purposes Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³ Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

LaserTec FullSet Monolith 265 industrial energy storage system was built by LaserTec S.A. in Poland in 2023. This highly advanced machine is a key component of a company’s strategic energy management. It allows the storage and management of electricity at the most cost-effective times, bringing tangible savings to the company. The system also plays an important role in stabilising and reducing overloads on the local network, which is particularly important in industrial plants where the continuity of production processes is critical to maintaining operational fluidity. The FullSet Monolith 265.50h energy storage system accumulates electricity from both photovoltaic installations and the grid. The battery modules made of NMC lithium-ion cells are characterised by timeless durability. Off-grid operation, on the other hand, provides emergency power in the event of power cuts. This solu ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...