129,010 used machines on RESALE, but how to find them? Machine Search
horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Capacity 5000L Auction-ID: A3-43515-16460
horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Volume: 250l, max. operating pressure: 11bar, outer diameter: 450mm, stand height: 1800mm, medium temperature min./max.: -10°C/120°C. Documentation available. On-site inspection is possible. The machine is unused and as good as new.
Used double spiral mixer VMI, type: Petrin Kneadster KN 250 -in bakery condition- - 2 kneading machines incl. 4 extendable tank wagons for 250 kg dough - Machine with double kneading arms - Fast and even dough preparation without heating - All in stainless steel - Incl. boiler lifter for tipping onto a work table -El. Connection: 400 V, 50 Hz, 80 A, 55.3 kW - Protection class: IP 54 The dough mixers are in good condition and ready for immediate use. More pictures on request. Viewing and test run are possible.
Volume: 5000l, permissible operating temperature: 80°C. On-site inspection is possible.
1. Process Engineering Equipment - Glycol Tank (B617) Partial system, 1 glycol tank, fully functional, built in 1990 Complete system (control, pumps), cleaned System Installer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Sheet steel construction, diameter approx. 2m; Length approx. 4m; Weight 4.0 t; Volume 4800 l Find more here - / Contact us at -
VA-07. Residual Gas Compression/Process Water (B660) 1 process water tank type BALRG 998 Partial system, 1 process water tank type BALRG 998, Built: 1991 System incl. pipeline system, functional, cleaned Manufacturer: DEHOUST GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 2.0m; Length 8.0m; Mass 5.0t; Volume 24,000 l; Test pressure 2 bar Find more here - / Contact us at -
VA-06. Gas HD – Separator Systems (F 603) Partial system, 4 HD separators, functional, Built: 1990 Complete system (control, etc.), cleaned System Manufacturer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 0.8m; Length approx. 3.4m; Mass per unit 2.5 t; Total volume 1128 l Find more here - / Contact us at -
VA-10. Residual Gas Compression/Separation Stages (V 671A/B, B670) 3-stage complete system, Type SN, Built: 1990 Incl. necessary equipment, functional, part of the overall system Residual gas compression consisting of pulsation damper B674, separator B670, Tank B673, heat exchanger W672, filter B679, slop tank B675, Gas/liquid separator B661, pipelines Manufacturer: Andreas Hofer Hochdrucktechnik GmbH Technical Data: Steel sheet construction, BMG 5709/968; Find more here - / Contact us at -
Vertical sedimentation tank made of stainless steel. Capacity: 80 hl, Additional title: Vertical stainless steel tank, Content: 8000 l, Width: 2100 mm, Height: 6000 mm, Material: Stainless steel, Position: free standing, Base construction: Cylindrical tank with dished bases, on square tube feet, Features: Manhole in the frame, central bottom outlet
Insulated cream ripener tank made of stainless steel. With agitator and heating/cooling surfaces Capacity: 125 hl, Additional title: Heatable stainless steel tank with agitator, Content: 12500 l, Width: 3,1 m, Height: 4,2 m, Material: stainless steel, Position: free standing, Base construction: Cylindrical tank on tubular feet, Features: Insulation with welded stainless steel panelling, manhole and anchor agitator on top, sampler
Vertical stainless steel tank with various connections., Additional title: Vertical stainless steel tank, Capacity: 5000 l, Width: 1,45 m, Height: 3,8 m, Weight: 350 kg, Material: Stainless steel, Position: vertical
- Material: DIN 1.4404 / AISI 316L - Surface : 3D (BA) Dimensions: - Width: 1475 mm - Depth: 2750 mm - Height: 3700 mm - Ground clearance: 500 mm Design: - Rectangular manhole 310 x 420 mm - Residual drain butterfly valve DN 40, Friedrich no. 2 - Clear drain Angled seat free-flow valve DN 40, Friedrich no. 2 - Clear drain butterfly valve and swivel elbow DN 40, Friedrich no. 2 - Level indicator - Cooling plate - Handwheel taster - Dome NW 400 mm with swivelling cover
Horizontal stainless steel tank, most recently used as a beer flotation tank., Additional title: horizontal stainless steel tank, Volume: 42300 l, Operating pressure: 0,99 bar, Operating temperature: 20 °C, Material: stainless steel, Position: horizontal, Features: manhole
Vertical cylindrical-conical tank with insulation and aluminium trapezoidal sheet metal cladding., Additional title: vertical insulated tank, Total content: 13600 l, Position: standing on 4 feet, Base construction: cylindrical tank with conical bottom, Features: Insulation
Vertical, coolable stainless steel tanks with various fittings., Additional title: stainless steel tanks with temperature control, Total capacity (gross): 90400 l, Material: stainless steel, Features: 3 fermenting tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl) , own temperature control (Nerb)
Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: vertical stainless steel tank, Capacity: 100000 l, Material: Stainless steel, Position: Vertical
Stock# U2458-1 Used vertical stainless steel 1.4571 (AISI 316Ti) mixing tank by Heidelmeier (DE) with total volume 9000 l. Working volume up to 6000 l. Tank has internal diameter 2470 mm x length of the straight wall 1700 mm. Top flat, with bolted cover. There is an inspection manway with manually rised cover. Bottom welded, conical with central discharge. Tank is equipped with side wall agitator, type "jet stream" by Ystral type TFW-4. Driven directly by el motor 11 kW, 1475 rpm, 400/690 V, 50 Hz. Tank is mounted on 4 stainless steel legs. Last time used in chemical production.
DIAMETER 1360 MM X 4200 MM(H) X 150MM(CONE) CURRENCY MYR CONTACT: +601120630175 (PUTERI)
Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: vertical stainless steel tank, Capacity: 100000 l, Material: Stainless steel, Position: Vertical
Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: Sludge tank, Capacity: 70000 l, Length: appr. 3,8 m, Width: appr. 3,8 m, Material: Stainless steel, Position: Vertical, Features: Outlet pump 2,2 kW, (flow rate 19m3/h); Agitator
Vertical stainless steel tank with agitator, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical agitator tank from stainless steel, Capacity: 100000 l, Material: Stainless steel, Position: Vertical, Features: Agitator
Various ZKGs fermentation tanks storage tanks, pressure tanks beer, shell cooling, year of construction 2019, volume 10hl 1000 liter, 20hl 2000 liter, 30hl 3000 liter, 1.5 bar Varoius CCTs, Fermenter, Fermentation, Storage Tank, Bright Beer Tank, BBT, Cooling jacket, Year: 2019, Volume 10hl 1000 liter, 20hl 2000 liter, 30hl 3000 liter, 1,5 bar
600 litre, Stock number: T4001, Litre: 600, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs , Top: Conical, Bottom: Conical, Inspection cover: Ø 300 mm., Inner diameter: Ø 700 mm., Total height: 2000 mm.
Here is the German translation of your text: This LPG tank with a capacity of 6400 litres is designed for the safe storage of LPG and meets the strictest European standards. It is manufactured in accordance with the Pressure Equipment Directive (PED) – 2014/68/EU and the EN 13110 standard, which applies to above-ground or underground stationary liquid gas tanks. ✅ Capacity: 6400 liters ✅ Compliance: PED 2014/68/EU ✅ Standard: EN 13110 – Stationary LPG tanks ✅ Installation: Above ground or underground possible Optionally, we offer: Compatible valves and accessories A metal frame for the installation of the tank
Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical stainless steel tank, Capacity: 150000 l, Material: Stainless steel, Position: Vertical
Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 22,800 L Dimensions: Ø 2.20 × 6.20 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
600 litre, Stock number: T4000, Litre: 600, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs , Top: Conical, Bottom: Conical, Inspection cover: Ø 300 mm., Inner diameter: Ø 700 mm., Total height: 2000 mm.
Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 22,800 L Dimensions: Ø 2.20 × 6.20 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
220 litre, Stock number: T3933, Litre: 220, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On wheels, Top: Open, Bottom: Plain, Inner diameter: Ø 700 mm., Outer diameter: D 750 mm., Total height: 750 mm.
Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 22,800 L Dimensions: Ø 2.20 × 6.20 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
600 litre, Stock number: T3210, Tank, stainless steel,, closed top, standing on legs., Dished top,, inspection cover in the top., Ø 850 mm., Litre: 600, Material: Stainless steel AISI 304
Vertical stainless steel tank with agitator, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical stainless steel agitator tank, Capacity: 50000 l, Length: ca. 3,2 m, Width: ca. 3,2 m, Material: Stainless steel, Position: Vertical, Features: Agitator
1.600 litre, Stock number: T3890, Tank, plastic,, open top, standing in a leg stand., Conical bottom,, inner overflow/drain., Frame agitator from top,, Ø 1330 mm., Litre: 1.600, Material: Plastic
Standing stainless steel tanks, V2A, with flat bottom with slope Volume: 28,800 L Dimensions: Ø 2.20 × 7.90 high Dimensions welded stainless steel plate/foundation plate: 2.30 m x 2.30 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
2.200 litre, Stock number: T3891, Tank, plastic,, open top with strengthening ring., Bridge on the top,, 2 x 1/2 lids on the top., Standing on a plain bottom,, 2 x turbulence plates., Ø 1500 mm., Litre: 2.200, Material: Plastic
300 litre, Stock number: T4030, Litre: 300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open top with lid, Bottom: Plain sloping, Agitator: Yes, Agitator type: 4-bladed propeller, Agitator placement: From the top, Motor: 0,25 kW - 220/380 Volt - 375 rpm., Inner diameter: Ø 625 mm., Total height: H 1850 mm.
maximum number of results exceeded
please refine your search
250 € 
