stone used for sale

Sell a pot grinding machine from Ahtena FRC Rolo Camurri technical data: 2850 rpm 2.2 Kw 50Hz; 380V; 5.3A Permanent magnet / clamping magnet 150mm250mm Distance under edge grinding stone to magnetic top edge approx. 170mm with coolant pump otherwise technically good condition

Band saw of the Fa DoAll Dimensions 1.3m wide; 1.3m low; 2m High Work table area 850670mm max workpiece through-the-box approx. 300mm Pre-laying infinitely variable speed transmission Welding device with grinding stone for band saw blades Feed infinitely adjustable; Return without function

Miwe Condo CO 4.0608 2D floor oven with fermentation oven BJ: 2009 Type: CO 4. 0608 2D with fermentation cabinet 4 floors for 60x80 cm sheets each 2 double-chamber floors with one controller each each floor with stone baking plates digital control Miwe FP control mobile on steering wheels Fermentation cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Technical data: BJ: 2009 400/230 V 50hz 19.6 kW

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

Miwe Condo CO 4.0608 2D floor shop oven My. 2011 4 floors for 60x80 cm sheets each 2 double-chamber floors with one controller each each floor with stone baking plates Entrance floor height 13 cm digital control Miwe FP control mobile on steering wheels Fermentation cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Technical data: BJ: 2011 400/230 V / 50Hz / 19.1 kW Electric From this Miwe Condo oven we have many constantly available in our warehouse immediately. Built from 2009 to 2012.

TECHNICAL SPECIFICATIONS (impact crusher) Manafacture: SBM Designation: Impact crusher Version: Semi-mobile Type: RHS 12/12/4 Year of construction: 1998 Drive cable: 160 kW Drive type: V-belt Throughput: 130 t/h Inlet opening (width/depth): 1,264 / 1,047 mm Maximum feed size: 800 mm Number of blow bars: 4 pcs. Rotor diameter: 1,280 mm Rotor speed: 33.3 m/s Weight impact crusher: approx. 15,500 kg SPECIFIC COMMENT - Selective crushing of soft to medium-hard natural stone, reinforced concrete and rubble - Without grinding track - Can also be used as a secondary crusher OVERALL SYSTEM CONSISTING OF: - SBM impact crusher RHS 12/12/4 - Feed hopper with vibrating chute - Bar sieve for pre-screening - Outlet channel - Discharge conveyor - Overbelt magnet - Stockpile conveyor - SIMENS Simatic OP7 controller -Structural steelwork - Generator set - Optionally a ...

Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use during cleaning work in workshops. Its smooth-running rollers provide the industrial vacuum cleaner with a high degree of mobility. The spacious dust collection container has a capacity of 80 litres. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for EUROSOG industrial vacuum cleaners: AC version for sporadic use For dry, coarse and fine dusts For cleaning processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical Printing industry Flocculation industry Cleaning industry Ha ...

Used Zocca Rpat 650 Hydraulic Tangential Grinding Stone Head with Magnetic Plane 500x300

I-Max 3D UV Printer, 60x90cm Printable Area, Printable On All Surfaces Flat Or Round On Any Materials: Paper, Wood, Glas, Metal, Tiles, Stone, Rigid PVC Board, Organic Board, Plastic, Leather, Rubber, Special Paper, Porcela, Cancas etc., Print On Object Thickness Upto 15cm, 3 SQM Per Hour (4 Pass), Print On Almost Every Materials, Less Maintainess Cost, Low Ink Consumption Cost, Max. Printing Resolution: 2880 dpi 1440 dpi, Water Cycling Cooling System, CISS Built Inside Ink System, Automatic Height Adjustment With Sensor, Equipped With Vacumm Suction System, Image Format: Tiff, Bmp, Jpg, Eps, Pdf, CAD, Rip Software: Maintop, Photoprint. Ref-NO.: digital-printer-IMAX

Microrex ME264 brand rotary bowl table grinding machine Siemens Lc control manual control Rotary table 1000 mm/rev Stone diameter 500 mm Our machines paint is new

Floor oven Wiesheu EBO 5-128 Floor oven Wiesheu EBO 5-128 -with hood including fan -with base -5 herds each 120x80cm -each stove with stone slab -digital Wiesheu Comfort control -Upper and lower heat can be controlled separately -with fixed water connection for each floor seperat -Each floor with separate swath box for swaths -Each floor with exposed glass -Each floor with lighting -Built in 2014 -Connection per floor 9.9 kW -Total connection power 49.5 kW -400 Volt 3/N/PE 50 Hz -Oven is mobile on wheels -prud and cleaned The furnace is fully assembled Ready for loading in stock.

For sale, Trabattoni Roaster Completely Overhauled Complete With Green Coffee Loader And Stone Silos. LPG and methane burner.

For sale is a Wacker Neuson DPU 6555, which is like new and has hardly been used. These medium-duty reversible vibratory plates offer high productivity due to their strong compaction force combined with fast supply and return. They are ideal for construction sites that place high demands on the performance of a device. The vibratory plates also offer outstanding properties in terms of durability and ease of use. They are ideally suited for the compaction of frost and base layers in road, path and parking lot construction as well as for backfilling buildings. With a frequency of 69 Hz, the medium-heavy, reversible vibratory plates can be used universally and reliably compact even medium- to heavy-duty composite stone pavement. Specifications: - Operating weight: 504 kg - Centrifugal force: 65 kN - Working width: 710 mm - Engine: Hatz (with electric starter and hour meter)

Corundum stone mill Manufacturer: Fryma Type: MK-270 R Built: 1981 N°: F815198/9 Pressure working space: 1 bar Pressure double jacket: 10 bar with control cabinet with temp gauge with outlet chute various spare parts LWH: 1100 x 850 x 1700 mm

NEW !, Land Clearer - Stone Collector

Corundum stone mill Manufacturer: Fryma Type: MMR-O N°: 166 with funnel & outlet Power: 12 hp with various grinding discs LWH: 500 x 500 x 1250 mm

stone measuring plate 400 x 400 x 50 mm ( 3 pieces available / price per piece )

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

grinding range: max. 30 mm angle adjustable from - to: horizontal 0-180 Grad angle adjustable from - to: vertikal 0-45 Grad angle adjustable from - to: negativ 0-52 Grad connected load: 230 V wheel diameter: 100 mm weight of the machine ca.: 55 Kg dimensions: 0,5 x 0,4 x 0,4 m This grinding machine is suitable for: Twist drill (max.13mm), milling cutter and turning tool (max. 30mm) comes with: - chisel grinding tool - Diamond grinding stone for HM. - White whetstone for HSS. - LED lighting - All adjustment tools. - Diamond dresser for sharpening stones. C-5 collet set with the following sizes. 1.5 - 2 - 3 - 4 - 5 - 6 - 7 - 8 -9 -10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 96 Positionen weight: 600 kg condition: neu : 28 mm Special set 96 pieces, 28mm system, consisting of: 1x tool trolley 30x quick release bolts with twist lock short, without O-rings 8x universal stop 150 L - nitrided 4x universal stop 225 L - nitrided 8x stop and clamping angle 175 L - cast 2x stop and clamping angle 500 G left - nitrided 1x stop and clamping bracket 750 G left - nitrided 1x stop and clamping bracket 750 G right - nitrided 1x stop and clamping bracket 500 G left - nitrided 1x stop and clamping bracket 500 G right - nitrided 4x stop and clamping angle 300 G left - nitrided 8x prism Ø60-135 ° burnished - with collar complete with screw collar and countersunk head 16x professional screw clamps - nitrided 6x Professional screw clamp 45 ° / 90 ° - nitrided 4x universal stop 300 - nitrided 1x accessory set consisting of: Eccentric, Allen key, brush, sharpening ston ...

roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...

BÜHLER Stone Mill MSUA 400 4 kw V-belt drive n=500 rpm Inlet 100 mm diameter Engine rebuildt Bearing: oil exchanged

Miwe Condo Shared Store Oven Type: Co 40608 2D Specifications: 4 floors / each floor 60 x 80 cm Years of construction 2008 – 2012 each floor with stone baking slabs digital Miwe FP control Can be driven on castors 2 double-chamber floors with 1 controller each with exhaust hood including exhaust engine with fermentation cabinet Condition "good" the herds have a height of 13cm 19.1 kw 400/230V 3/N/PE Outside dimensions : Width:90cm Depth:120cm Height:210cm Several in stock!

A used shared oven Miwe Condo CO 5.0806 from 2011 is currently for sale and immediately available in our warehouse in Bielefeld. This stove is equipped with stone slabs, with 5 floors each 80x60cm and digital Miwe FP control and exhaust hood including exhaust motor. Bakery Shared Oven Miwe Condo CO 5.0806  -Type: CO 5.0806  -5 floors each for 1 sheet 80x60 cm sheets -each floor with separate Miwe FP control -each floor can be switched on and off separately -Upper and lower heat separately adjustable -each floor with separate swath box (steam) -requires fixed water connection -each floor with exposed glass door -Stainless steel cladding  -digital control -Oven can be moved on castors on swivel castors  Specifications:  400 / 230V 3/N/PE 50 Hz / 29.1 kW Year of construction 2011 External dimensions: Width 110cm Depth: 120cm Height: 191cm Floor entrance height: 17 ...

Wiesheu shared shop oven Type: EBO 128 Year of construction 2012 4 floors a 120x80cm with lower sheet metal shelf Stainless steel side plates with hood Electric fire Per floor 10,45kW on rolls NEW STONE SLABS FLOORS REPAINTED HOOD REPAINTED COMPLETELY CLEANED INSIDE Height: 212cm Width: 150cm Depth: 100cm

Stone slab oven Quail Piccolo I-6 DMS 3 Master Year: 2011 Shared oven -6 floors each 80x60 -each floor fits 2 sheets 60x40cm next to each other long ago -each floor fits a sheet metal 60x80cm transversely -each floor with separate control -Above us bottom heat separately adjustable -each floor with separate swath box -Floor entrance height: 14cm -with base including sheet metal shelf -with exhaust air hood -Control from the oven on the left -Year of construction 06 / 2011 -Electrical connected value: 26.4 kW -Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions: 117cm wide 110cm deep without hood 227cm high

Miwe Condo Shared Store Oven Type: Co 40608 2D 4 floors / each floor 60 x 80 cm Years of construction 2008 – 2012 each floor with stone baking slabs digital Miwe FP control Can be driven on castors 2 double-chamber floors with 1 controller each with exhaust hood including exhaust engine with fermentation cabinet Condition "good" the herds have a height of 13cm 19.1 kw 400/230V 3/N/PE Outside dimensions : Width:90cm Depth:120cm Height:210cm We have about 60 pieces of these condo ovens in stock!

Quail shared shop oven Type: Piccolo I-6 6 floors for 1x sheet 60×80 cm or 2x sheets 60×40 cm with extractor hood DMS 3 Master Timer Control Upper and lower heat separately adjustable large floors lower sheet metal shelf Year of construction 2016 29.4 kW total tested & cleaned Achievement: 400 V / AC / 3Ph / N / PE / 50 Hz Height: 234cm Width: 100cm Depth: 135cm Optionally also with new stone slabs

Quail shared shop oven Type: Piccolo I-8 8 floors for each 1x sheet 60×80 cm or 2x sheets 60×40 cm DMS 3 Master Timer Control Upper and lower heat separately adjustable large floors lower sheet metal shelf Year of construction 2009 39.4 kW total tested & cleaned Optionally also available with new stone slabs Achievement: 400 V / AC / 3Ph / N / PE / 50 Hz Height: 237cm Width: 100cm Depth: 139cm

-electric stone slab oven quail -Model Piccolo I-6 -Control DMS 3 m. Clock Timer K -6 floors each 60x80cm -each floor with separate control -each floor with top and bottom heat separately adjustable -each floor has its own steam box -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction: 11 / 2011 -electrical power supply 31.1 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 234cm

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Key data: 1020 , 600 , 700

Grinding length: 1020 mm Grinding width: 600 mm Grinding height: 700 mm Wheel diameter: 406 mm X – Travel:              1.020mm Y – Travel:              600mm Z – Travel:              700mm Table Length:            1.020mm Table Width:             700mm Table load:              1.500Kg Feed rate X-Axis:        25.000mm/min. Feed rate Z-Axis:        25.000mm/min. Grinding stone dimensions:406 x 50 x 127 mm Power:                   7kW Speeds:                  1450Rpm Length:                   ...

Key data: 4000 Fagor, 1100 8055, 1000

Grinding length: 4000 mm Grinding width: 1100 mm Grinding height: 1000 mm Wheel diameter: 500 mm Spindle power: 20 kW CNC Brand: Fagor CNC Model: 8055 X – Travel:              4.000mm Y – Travel:              1.100mm Z – Travel:              1.000mm Table Length:            4.000mm Table Width:             1.000mm Table load:              5.000Kg Feed rate X-Axis:        30.000mm/min. Feed rate Z-Axis:        5.000mm/min. Grinding stone dimensions:500 x 100 x 203 mm Power:                   20kW Length:                  11.000 mm   ...

Key data: 5500 Siemens, 650 840 D, 750

Grinding length: 5500 mm Grinding width: 650 mm Grinding height: 750 mm Wheel diameter: 600 mm Spindle power: 115 kW CNC Brand: Siemens CNC Model: 840 D CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO – KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser X – Travel:              5.500mm Y – Travel:              650mm Z – Travel:              750mm Table Length:            5.500mm Table Width:             750mm Feed rate X-Axis:        20.000mm/min. Feed rate Z-Axis:        20.000mm/min. Grinding stone dimensions:600 x 300 mm Power ...

Key data: 2200 Siemens, 750 Sinumerik 820 GA3, 500

Grinding length: 2200 mm Grinding width: 750 mm Grinding height: 500 mm Wheel diameter: 500 mm Spindle power: 75 kW CNC Brand: Siemens CNC Model: Sinumerik 820 GA3 equipped with table dresser X – Travel:              2.200mm Y – Travel:              750mm Z – Travel:              500mm Table Length:            2.200mm Table Width:             500mm Feed rate X-Axis:        15.000mm/min. Feed rate Z-Axis:        10.000mm/min. Grinding stone dimensions:500 x 240 mm Power:                   75kW Speeds:                  8000Rpm Coolant system:        ...

Grinding length: 1500 mm Grinding width: 750 mm Grinding height: 650 mm Wheel diameter: 406 mm CNC Brand: Siemens CNC Model: 810 D FAVRETTO - MC 130 CNC Surface grinder 1500 x 750 x 650 mm MACH - ID 6318 Make: FAVRETTO Type: MC 130 Control: SIEMENS 810D YOP: 2004 X – Travel    1.500 mm Y – Travel       750 mm Z – Travel        650 mm Table Length       1.500 mm Table Width         500 mm Table load            1.600 kg Feed rate X-Axis     5.000 mm Feed rate Z-Axis      5.000 mm Grinding stone dimensions       406 x 152,4 x 100 mm Power      15 kW Speeds     1400 Rpm Coolant system    Yes Dimensi ...

Grinding length: 1650 mm Grinding width: 810 mm Grinding height: 522 mm Wheel diameter: 355 mm Spindle power: 7 kW CNC Brand: _Unknown / Other CNC Model: AD-1 Over arm construction 0,001 mm program Meehanite cast iron Coolant & Filtration X – Travel:              1.650mm Y – Travel:              810mm Z – Travel:              522mm Table Length:            1.500mm Table Width:             750mm Table load:              2.500kg Feed rate X-Axis:        25.000mm Feed rate Z-Axis:        15.000mm Grinding stone dimensions:355 x 50 x 127 mm Power:                   7,5 kW Sp ...

Grinding length: 1500 mm Grinding width: 750 mm Grinding height: 650 mm Wheel diameter: 406 mm CNC Brand: Siemens CNC Model: 810 D FAVRETTO - MC 130 CNC Surface grinder 1500 x 750 x 650 mm MACH - ID 6317 Make: FAVRETTO Type: MC 130 Control: SIEMENS 810D YOP: 2008 X – Travel    1.500 mm Y – Travel       750 mm Z – Travel        650 mm Table Length   1.500 mm Table Width     500 mm Table load        1.500 kg Feed rate X-Axis    5.000 mm Feed rate Z-Axis    5.000 mm Grinding stone dimensions       406 x 152,4 x 100 mm Power        15 kW Speeds       1400 Rpm Coolant system      Yes Dimensions Length      5. ...

Grinding length: 1570 mm Grinding width: 400 mm Grinding height: 460 mm Wheel diameter: 400 mm CNC Brand: Siemens CNC Model: 805 Quick MACH - ID 6310 Make: Ziersch & Baltrusch Type: Starline 1000 NC Comfort Control: Siemens 805 Quick YOP: 1999 X – Travel     1.570 mm Y – Trave      l400 mm Z – Travel     460 mm Table Length      1.200 mm Table Width       500 mm Table load          1.400 kg Feed rate X-Axis       35.000 mm Feed rate Z-Axis        10.000 mm Grinding stone dimensions        400 x 127 x 80 mm Power       7.5 kW Speeds      2800 Rpm Coolant system      Yes Feed rate Y-Axis  & ...

Grinding length: 1500 mm Grinding width: 750 mm Grinding height: 650 mm Wheel diameter: 406 mm Spindle power: 15 kW FAVRETTO - MC 130 Surface grinder 1500 x 750 x 650 mm MACH - ID 6284 Make: FAVRETTO Type: MC 130 YOP: 1993 X – Travel    1.500 mm Y – Travel       750 mm Z – Travel        650 mm Table Length    1.500 mm Table Width       750 mm Table load          1.600 kg Grinding stone dimensions        406 x 152,4 x 100 mm Power       15 kW Speeds       1400 Rpm Coolant system       Yes Dimensions Length       5.000 mm Width        3.000 mm Height        2.800 mm Weight&nbs ...

Grinding length: 470 mm Grinding width: 171 mm Grinding height: 500 mm Wheel diameter: 200 mm MACH - ID 6235 Make: JONES & SHIPMAN Type: 540 X YOP: 1995 X – Travel    470 mm Y – Travel    171 mm Z – Travel    500 mm Table Length    450 mm Table Width      150 mm Table load         100 kg Grinding stone dimensions     200 x 34 x 31,7 mm Power      1,5 kW Speeds     2640 Rpm Coolant system     yes Dimensions Length    2.000 mm Width     1.200 mm Height    1.800 mm Weight   1.200 kg

Grinding length: 520 mm Grinding width: 300 mm Grinding height: 300 mm Wheel diameter: 254 mm Spindle power: 6 kW MACH-id        6050 MAKE            Fumagalli Italia TYPE              RTA 450 YOP                1991 SPECIFICATIONS X - Travel         520 mm Y - Travel          300 mm Z - Travel          300 mm Table Length      465 mm Table Width         250 mm Table load           200 Kg Feed rate X-Axis        0,03 - 27 mm/min. Feed rate Z-Axis        0,002 - 0,036 mm/min. Grinding stone dimensions          254 x 40 x 76 mm Pow ...

Grinding length: 470 mm Grinding width: 171 mm Grinding height: 500 mm Wheel diameter: 200 mm Spindle power: 2 kW MACH-id        6030 MAKE            Jones & Shipman TYPE              540 X YOP                 1990 SPECIFICATIONS X - Travel       470 mm Y - Travel       171 mm Z - Travel        500 mm Table Length       450 mm Table Width         150 mm Table load            100 Kg Feed rate X-Axis       25.000 mm/min. Grinding stone dimensions         200 x 20 x 31,7 mm Power           1,5 kW Speeds       ...

Grinding length: 650 mm Grinding width: 230 mm Grinding height: 350 mm Wheel diameter: 225 mm Spindle power: 1 kW MACH-id      5557 MAKE           OKAMOTO Japan TYPE            ACC 52 EX YOP               1999 SPECIFICATIONS X - Travel       650 mm Y - Travel       230 mm Z - Travel       350 mm Table Length        550 mm Table Width        200 mm Table load         100 Kg Grinding stone dimensions          225 x 20 x 50,8 mm Power         1,5 kW Speeds         2800 Rpm Coolant system          yes DIMENSIONS Length  ...

Grinding length: 560 mm Grinding width: 241 mm Grinding height: 457 mm Wheel diameter: 203 mm Spindle power: 1 kW MACH-id      5406 MAKE           Chevalier Taiwan TYPE             FSG 818 AD YOP               1999 SPECIFICATIONS X - Travel      560 mm Y - Travel       241 mm Z - Travel       457 mm Table Length        457 mm Table Width         203 mm Table load           100 Kg Feed rate X-Axis      0.001 mm/min. Feed rate Z-Axis      0.001 mm/min. Grinding stone dimensions        203 x 25,4 x 76,2 mm mm Power       1,5 kW Speeds   ...

Grinding length: 1300 mm Grinding width: 550 mm Grinding height: 560 mm Wheel diameter: 400 mm Spindle power: 7 kW CNC Brand: _Unknown / Other MACH-id    5480 MAKE        Blohm TYPE          Planomat 612 - ERGOMATIC EASY TOUCH YOP            2001 SPECIFICATIONS X - Travel        1300 mm Y - Travel         550 mm Z - Travel         560 mm Table Length       1200 mm Table Width          600 mm Table load         800 Kg Feed rate X-Axis         4.000 mm/min. Feed rate Z-Axis           4.000 mm/min. Grinding stone dimensions     400 x 127 x 50 mm Power       ...

Grinding length: 560 mm Grinding width: 241 mm Grinding height: 457 mm Wheel diameter: 203 mm MACH-id    5406 MAKE       Chevalier Taiwan TYPE         FSG 818 AD YOP           1999 SPECIFICATIONS X - Travel        560 mm Y - Travel        241 mm Z - Travel         457 mm Table Length         457 mm Table Width           203 mm Table load              100 Kg Feed rate X-Axis      0.001 mm/min. Feed rate  Z-Axis       0.001 mm/min. Grinding stone dimensions       203 x 25,4 x 76,2 mm Power       1,5 kW Speeds      2850 Rpm Cool ...

Drill diameter maximum: 80 mm Drill diameter minimum: 4 mm Make Farman FC 80 N Type FC 80 N Year 2008 universal drill grinder farman bohren schleifer Grinding length (mm)Min = 4 mm Grinding width (mm)Max = 80 mm Grinding heightAngle = 40 - 180 Wheel diameter (mm)3 HP / 400 V Stone = 180 x 50 x 31.75 incl. coolant systemincl. dressing unit  

Shared oven Miwe Condo CO 4.0608 2D used shared oven Miwe Condo CO 4.0608 2D shared oven from 2004 is currently for sale and immediately Available in our warehouse in Bielefeld.Shared oven Miwe Condo CO 4.0608 2D Miwe Condo shared oven with 2 double chambers so 4 floors plus proofing cabinet plus steamer. The stove is with Miwe FP 12 control, each floor 60x80cm long. Immediately available 40 pieces of Miwe Condo in stock. 4 floors for each 60x80 cm sheets 2 double-chamber floors, each with one controller each floor with stone baking slabs Entrance floor height 13 cm digital control Miwe FP control can be driven on swivel castors Proofing cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Specifications: YEAR: 2004 400/230 V / 50Hz / 20.9 kW Electric