stone mill used for sale

Various tools including batch of inserts, tap holders, 1x insert drill ø 55 mm; 1x Akko AKSR 90-120 cutter head. Auction-ID: A1-49889-28

including: interchangeable inserts, core drills, countersink Auction-ID: A1-49889-294

Universal Milling Machine Operating hours 2672 according to meter Universal milling head can be swivelled 360° Mounting SK 30 Table eyelet 900 × 300 mm with three T-slots Including machine vise Machine in very good condition immediately ready for use Auction-ID: A1-50529-6

With various inserts; Milling depth 20 mm. Auction-ID: A1-49889-139

With various milling heads and inserts; Milling depth 20 mm Auction-ID: A1-49889-140

Lot of roller end mills, 7 pieces, different sizes, see pictures. Auction-ID: A1-50529-220

x-travel: 760 mm y-travel: 381 mm z-travel: 450 mm quill stroke: 152 mm table-size: 1300 x 305 mm control: Heidenhain TNC 360 tool adaptor: SK40 turning speed range: 100- 4.000 U/min rapid speed: 5000 / 7000 m/min feed speeds: 2,5 bis 3000 mm/min power requirement: 2.2 kW diameter of quill: 101 mm total power requirement: 15,0 kW weight of the machine ca.: 2,4 t dimensions: 2,4 x 2,3 x 2,2 m Equipment: - Heidenhain TNC 360 - Coolant system - Hydraulic tool clamping - Milling head with quill - Machine light - Chip tray - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock No.: 4053 MACHINING CENTER Manufacturer: EMCO, Type: MMV 2000 Serial No.: M-20906019, Year of manufacture: 2017 Specifications: Table size 2400 x 950 mm Large table load 2200 kg Longitudinal movement (X) 2000 mm Transverse movement (Y) 800 mm Vertical movement (Z) 750 mm Spindle taper SK 40 ISO Spindle speeds 50-15000 rpm Spindle motor 46 B-axis angle +/- 120 angular degrees Tool Changer 40 Control Siemens 840 D SL Controlled in axles 4 Operating hours spindle 4488 hours Accessories:                             Cooling by spindle 20 bar Chip conveyance.                      Tool Measuring                      Dimensions: Length: 2886 mm, Height: 3277 mm, Width: 4450 mm, Weight: 22 kg

Fitted with: Anilam Wizard 350 Plus digital readout (DRO) Table power feed Machine vice Large selection of R8 collets and tooling as pictured Coolant system 2HP variable-speed head R8 spindle 380V 3-phase power The machine is in great condition throughout and has been well looked after.

x-travel: 4500 mm y-travel: 1700 mm z-travel: 1000 mm TABLE: - table surface (left-right): 6100 mm - table surface (front-back): 1000 mm - workpiece load (max): 8000 kg WORKING SPINDLE / HEAD: - spindle type: Schwenkkopf - tilting range: 1 / 3 ° - spindle revolutions (min): 15 U/min - spindle revolutions (max): 3000 U/min - tool fixture: ISO SK 50 - drive power (max): 30 kW AXIS DRIVES: - feed velocity (min): - mm/min - feed velocity (max): 20000 mm/min Control: NUM 750 total power requirement: - kW weight of the machine ca.: 28 t equipped with: - CNC Control NUM 750 - Universal indexing head 1°x 3° - ATC 61-fold - CE Sign The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm

Acra Travelling Column Milling Machine from Taiwan

Key data: 6000 mm, 1250 mm, 2500 mm

Travelling column milling machine Manufacturer: Zayer Type 30KCU6000 AR Year of manufacture 2005 Control Heidenhain iTNC530 Travel X 6000 Z 2500 Y 1250 40 Compartment Tool Changer Tool holder SK50 Electronic Handwheel HR 510 Machine is in a used 100% working condition. It is sold from the Homburg Saar site, and a 20t overhead crane is available for dismantling.

Additional technical specifications: • Stop length left and right: 1600 mm

Equipped with: power supply, L-Gang on X-axis. Auction-ID: A1-50076-1048

Deckel FP3A nr 2820-1163 Auction-ID: A1-50076-370

Auction-ID: A1-50076-384

Already disassembled Auction-ID: A1-50076-7

Machine has already been disassembled Auction-ID: A1-50076-35

PC included. Operation unknown Auction-ID: A1-50076-580

2x bin with various cutters, dimensions of the bin is 400x300 mm Auction-ID: A1-50076-197

Includes milling tool, ball bearings 3-19 mm, mounting block turning tool. Auction-ID: A1-50076-1028

Auction-ID: A1-50076-467

Auction-ID: A1-50076-1047

Year 2014, equipped with milling head Kongsberg ArtWor Complete with vacuum system and unwinder, without dust extraction, Issue according to instructions Auction-ID: A3-50009-2

Cabinet with accessories for milling machine, plug-in head and shafts ISO40 Auction-ID: A1-50076-184

Including tap holders, parallel plates, clamping tools, etc. Auction-ID: A1-50076-278

equipped with 4th axis rotating table Auction-ID: A1-50076-54

Bj2019, equipped with High-Power milling unit. Complete with vacuum system, cooler IBAG and mobile unwinder, without dust extraction, Issue according to instructions Auction-ID: A3-50009-1

119x HSK 63 tool holder with full drilling, turning tools etc. Auction-ID: A1-50076-275

2x filled workshop cabinet with milling machine accessories iso 40 Auction-ID: A1-50076-261

Already disassembled Auction-ID: A1-50076-4

2x Chiron FZ 08 S, built in 1999/ 2000. Fully functional and ready for operation.

POS PosMill Type 1100 3-axis CNC milling machine Vertical CNC machining center with a machine table of approx. 1,050 x 600 mm. Equipped with a CNC control HEIDENHAIN TNC 430. Automatic tool changer. Equipment: Cooling system with IKZ, hydraulic system and chip conveyor. Auction-ID: A7-50677-25

POS PosMill Type C1050 – Universal Milling Machine Universal milling machine with travel distances X 1,050 mm / Y 530 mm / Z 630 mm and table size 1,150 x 560 mm. CNC control HEIDENHAIN iTNC 530. Hydraulic system for precise movements. Equipment: Coolant system and chip conveyor. Machine with protective devices and emergency stop system. Auction-ID: A7-50677-1

GeneralUniversal Milling Centre; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal750 mmCross600 mmVertical520 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightWeight approx.8000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only! Type of Measuring system Direct measuring system Table surface Ø 800 x 620 mmMaximum load (table centre) 350 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) -10/+95 x 0,001 degreeMode for positioning only Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge ...

GeneralUniversal Milling Centre; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal750 mmCross600 mmVertical520 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightWeight approx.8000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only! Type of Measuring system Direct measuring system Table surface Ø 800 x 620 mmMaximum load (table centre) 350 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) -10/+95 x 0,001 degreeMode for positioning only Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge ...

GeneralUniversal milling machine, with compound Guideway construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataType of main driveAC Drive power (100% DC)14,5 kWDrive power (40% DC)20,3 kWSpeed range20 - 14000 rpmSpindle taperBT 40 Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410! Table surface 630 x 500 mmCentre bore 30H6 mmMaximum load (table centre) 300 KgSlot width 14 mmNumb ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Toolchangertoolchanger Type of magazine Chain Type of gripper Double gripper Number of tools 30 Max. tool weight 8 KgMax. tool length 300 mmMax. tool diameter with occupied adjacent pockets 80 mmMax. tool dia. with free neighbouring pockets 130 mmNC swivel rotary tableSwivel Rotary Table for simultaneous ma ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 16 kWDrive power (40% DC) 21 kWTorque (100% DC) 85 NmTorque (40% DC) 111 NmSpeed range 20 - 15000 rpmSpindle taper HSK-A 63 Clamping System HSK-A 63 Toolchanger with set up station for tool loadingNumber of tools 60 Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360 ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.10000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)43 NmMax. torque64 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralHorizontal machining center; Control: Control F31iB with CELOS CharacteristicsSpeed max.-20000 rpmDrive power (100% DC)18,5 kWDrive power (40% DC)26 kWTable size500x500 mmSwivelling range360x1 degreeMaximum load (table centre)500 KgMax. work piece diameter800 mmMax. work piece height1000 mmPalett changer with2 PalletMovement X / Y / Z730/730/880 mmRapid feed X / Y / Z60/60/60 m/minTool Magazine with60 PositionsSpindle taperBT 40 Max. tool length550 mmDimensions (L x W x H)3,08 x 4,79 x 2,86 mWeight approx.12000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p High-speed spindle 20,000 min-1, 37/ 26/ 18.5 kWHigh-Speed Spindle 20,000 min-1, 37/26/18.5  ...

Pellet mill for straw / hay / alfalfa and much more ! Plant is about 500 hours. Running . Flat die 8mm and Koller head are included '

GeneralVertical-Machining centre Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmTool changerType of magazineWheel Type of gripperDouble gripper Number of tools30 TableTable surface 1760 x 750 mmMaximum load (table centre) 2000 KgSlot width 14 mmNumber of Slots 7 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 30 pockets HSK-A63Tool magazine 30 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazin ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minSpindle speed 24,000 rpmSpindle 24,000rpm with tool taper ISO 7388-2 - J30 BT30 / BBT 30 (BIG PLUS) possible for pull-studs ISO 7388-3 - JD30 (MAS 403-45°) at spindlespeed higher than 20.000 rpm BBT 30 (BIG PLUS) stipulated! AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spin Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-ax Rot ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)57 NmMax. torque83 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm) SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872 Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperature Electronic HandwheelExternal electronic Handwheel

The machine is in good technical condition; it can be tested by prior arrangement.

General2-Axes Universal Turning Center with driven tools, C-axis and Y-axis - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmSlide 1Longitudinal stroke540 mmTransverse stroke242 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-5000 rpmPower max. (40% DC)5,65 kWFloor space/WeightDimensions (L x W x H)2,8 x 2,3 x 1,85 (3,95 x 2,3 x 1,85) m mWeight approx.4400 KgAlternative Speed TurningTechnolog ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CNC control SIEMENS 840D ERGOLine Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke800 mmMax. Turning Length800 mmClamping chuck diameter max.250 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)4,17 x 2,69 x 1,99 mWeight approx.6500 KgChuck rinsing device, outsidechuck rinsing device, outside (m ...

GeneralUniversal turning-/milling center; Control: SLIMline® Control SIEMENS 840D sl, w/o CELOS Working areaSwing diameter over guide ways500 mmTurning diameter400 mmMax. Turning Length1100 mmBar diameter max.65 mmWork spindle (left)Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmBench speed485 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)8,8 kWDrive power (40% DC)10,5 kWTorque (100% DC)73 NmTorque (40% DC)90 Nmlocking moment850 NmSwivelling range+/- 120 degreeTool magazineType of magazineChain Number of tools60 Max. tool diameter78 mmMax. tool-Ø with free adjacent pockets125 mmFloor space/WeightDimensions (L x W x H)5,19 x 2,11 x 2,47 mWeight approx.11200 KgBASICBasic, consisting of: - Basic ...

General2-axes universal turning center with driven tools and C-axis; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode