stone mill used for sale

PINNACLE DV - CNC PORTAL MILLING MACHINE Year of construction 2010 Mitsubishi M70 Table : 2200 X 1200 mm X-axis travel 2200 mm Y-axis travel 1200 mm Z-axis travel 1000 mm Motor power: 32 kW With tool changer Total weight : 19t approx. Horizontal Head 90 Degree

A Lasercomb CNC high-speed die milling machine is available. Travel X/Y: 1070mm/1070mm, number of spindles: 4, spindle speed: 50000rpm, continuous power: 180W. Dimensions X/Y: approx. 2100mm/1900mm, weight: approx. 430kg. Documentation available. An on-site inspection is possible.

Inv. Num. : 8658 Type: AF 221 Producer: Elumatec Created: 1997 Parameters: Max Speed: 2800 1/min

Inv. Num. : 8653 Type: Hydromat 23 Producer: Weinig Generated: 2000 Parameters: Maximum vertical spindle speed: 6000 1/min Number of Spindles: 8 Spindle diameter: 50 mm Machine height: 1740 mm Machine length: 3900 mm Machine width: 1900 mm Machine weight: 4600 kg

Year: 2010 technically efficient, ready to work – after full service rotary table (3-sided profile machining) cooling and lubrication system copying template compressed air preparation station pneumatic clamps (4 vertical and 2 horizontal)

2 x milling machines Kunzmann WF 650 BJ 2005

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment8 ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Control Philips CNC 432 Travels X/Y/Z 600 x 400 x 450 mm Spindle speed 4,000 min-1 20-cavity tool magazine SK 40 4th Lehmann axis


Universal tool milling machine TOS FNGJ 32 3 Axis Heidenhain Digital Display Year of Make: 1999 Travel: X 600 Y 400 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 800 x 400 mm clamping surface Vertical milling head Extendable drill quill Various tool holders SK 40 Safeguard Chip tray Machine Light Automatic central lubrication pump for X,Y,Z axis Coolant Setup 4 pcs machine shoes

Key data: 600 mm, 400 mm, 420 mm

Hermle UWF 900 Universal CNC Milling Machine BAZ Year of Make: 1996 Machine number: 11410 Machine weight: 2,900 kg Availability: By arrangement. Machine is still energized and in perfect condition.

Inv. Num. : 8678 Type: GBM 31 Producer: GORATU Created: 2006 Parameters: Control system: Heidenhain iTNC 530 Work table length: 3100 mm Work table width: 900 mm Maximum table load (uniform): 6000 kg Maximum vertical spindle speed: 3000 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Power output: 22/27 kW Number of all tools: 24 Number of axes: 4 pieces Machine weight: 13410 kg

Univ. Tool Milling Machine DECKEL Type FP 1 Masch. No. 37101 Year of construction approx. 1969 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal: 60-1200 rpm. 12 steps Motor power 1.0 and 1.5 kW pole-switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant device with mechanical pump in the machine foot - Quill shift on the vertical milling head 60 mm - Adjacent control cabinet Space requirements L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition Accessories: -Collets -Roundtable -Vice - Counter holder H. milling

Heidenhain TNC 426/430 Year of construction 1998 Total Spindle Hours 17000 Travels X/Y/Z axis 500/380/380 mm Tool changer for 24 tools Tool holder SK40 Spindle speed 15000 rpm NC swivel rotary table 500 x 380 mm Feed speed max. 20000 mm/min Rapid traverse 30m/min Weight approx. 4000 kg Coolant Setup The machine is in very good condition. Milling spindle and axes run smoothly and very precisely.

1 gebr. CNC Milling Machine, Fabr. TOS, Type FNG 63 Travel: X 800 mm Y 500 mm Z 630 mm Heidenhain Control

CNC Mill, Cover, FP4-AT, 3 Axis X560/Y500/Z450 Speed range 40-4000 min-1 Control Contur-3, Mounting SK-40, weight approx. 3.4 t.

Tool milling machine Manufacturer: INFRATIREA, Type: FUS-32, built in 1988 Specifications: Table 950 x 450 mm Travel X / Y / Z: 500 / 320 / 400 mm Spindle speeds 25 - 2000 rpm with digital display

gebr. Milling machine, Fabr. Stanko Type 6175 Travel X/Y/Z: 320/210/300 mm Spindle speed: 50 - 2040 rpm Feed speed: 13 - 395 mm/min Drive power: 1.5 kW Tool holder: 4 MK Groove width: 14 mm Number of grooves: 3 pieces Groove spacing: 50 mm

OKUMA Euro Center V50, built in 2004 Control: OSP-10M Travel: X-1020 Y-510 Z-525 Table load 680kg Clamping area 1200x510 Tool changer 20-fold

Heckert CWK 400 Built in 1995 Control Siemens 840 Travel X/Y/Z 650/650/680 mm Spindle speed up to 10,000 rpm HSK 40 Tool Changer Rotary table 400 x 500 mm, Conveyor Weight 12.5 t.

gebr. V. Processing Center, Fabr. Homa, Type Ecocenter V350 x-travel 450 mm y-travel 350 mm z-travel 350 mm Table size 650 x 350 mm Speed 6000 rpm Control Fanuc 0M

Topper TMV-510 Built in 2008. Travel distances of X = 510 mm, Y = 360 mm, Z = 300 mm. Table surface 600 × 360 mm Controllers Fanuc 0i-MF

Argo A51, built in 2008 Travel Distances X 510 mm, Y 350 mm, Z 300 mm Table: approx. 600 × 300 mm Control: FANUC Dimensions 2,610 × 1,720 × 2,460 mm. Weight: ≈ 2,700 kg.

Inv. Num. : 8686 Type: Emcomat FB-450 MC Producer: EMCO Created: 2019 Parameters: Control system: Siemens Sinumerik 828D Work table length: 800 mm Work table width: 400 mm Maximum table load (even): 300 kg Spindle drive power: 10 kW Maximum vertical spindle speed: 5000 1/min X-axis travel: 450 mm Y-axis travel: 350 mm Travel Z axis: 400 mm Machine height: 1990 mm Machine length: 1980 mm Machine width: 2030 mm Machine weight: 2300 kg Equipment: Horizontal support arm Handwheel Tool holders (12 pieces) Mounting pads

Fanuc ROBODRILL ALFA T10 B, Built in 1995 Revolutions 8000 rpm Picture Sk 30 Control Fanuc 16 M Tool changer 10-fold

gebr. Milling machine, Fabr. Maho 1000 S x-travel: 1000 mm Y-travel: 600 mm z-travel: 800 mm Kne Uretrnrpehyxkjb Spindle holder ISO: 50 Control is the Philips 432 with pallet changer, in working condition, recently overhauled rotary table

Travel: x=1600mm Y=800mm Z=900mm Spindle speed max. 2000 revolutions per minute Control HH 407 A Cover of the z axis present but defective.

CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture : 1998 Specifications: X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Control : Siemens Sinumerik

Machine data: Control Heidenhain TNC 355 Year of manufacture 1989 Travel: X 600 mm travel Y 450 mm travel Z 400 mm travel Spindle speed 20 – 4000 min-1 Angle table size 850 x 440 mm Swivel table 650 x 395 mm Electronic handwheel The machine is still energized and in good condition.

Stock number: 3774 PROFILE BENDING MACHINE Manufacturer: KUMLA - ROUNDO, Type: Z-30 Machines NO.: 5017, Year of manufacture: 1990 Specifications: Shaft dia. 90 mm Round steel 60 mm Flat steel 200 x 30 Special roll mm Frame steel upright 100 x 20 mm Angle steel 90 x 90 x 9 mm Speed 7.5 m/min Upper roller 280 mm Ø Load by steel 40 Kg/mm2 16 cm3 Square steel 55 x 55 mm Total power 4 kW Hydraulic. 3-reels. Horizontal/Vertical Accessories: Digital Various matrices. Length: 1250 mm, Height: 1550 mm, Width: 1100 mm, Weight: 2100 kg

Key data: 530 mm, 450 mm, 450 mm

5-Axis CNC Machining Center Mikron UCP 600 Year of Make: 2004 Control: Heidenhain iTNC 530 x-travel: 530 mm y-travel: 450 mm z-travel: 450 mm Spindle: SK 40 Speed: 12,000 rpm Swivel table STP: Ø 400 mm Tool changer: 30 x Weight: approx. 6.5 t Switch-on hours: approx. 49,000 h Spindle hours: approx. 2,500 h

Various accessories for a Bridgeport milling machine according to photo 3 jaws Chucks, face plates, milling cutters, collets and much more.

Specifications: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Wheel spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Tool holder inside ISO No. 50 DIN 2079 Tool holder outside ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds infinitely variable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step Jump 1:2 Constant power range 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x direction infinitely variable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y- and z- direction infinitely variable from 20-500 mm/min. Rapid traverse for y- and z-axis 1,00 ...

Hurco VMX 24, YOC 2003 Travel X/Y/Z: 610mm/508mm/610mm Rapid traverse X/Y/Z: 35m/35m/30m Feed: 7600mm/min Table dimensions X/Y: 760mm/510mm Max. table load: 700kg Tool holder: SK40 Tool Positions: 24 Spindle speed: 10000rpm Power: 7.5kW Dimensions approx. 2200mm/2400mm/2500mm Weight: approx. 5000kg Control: Ultimax 4 (Documentation available)

Maho 700 C, built in 1983 Travel X/Y/Z: 700 mm/500 mm/450 mm Table dimensions X/Y: 900 mm/500 mm Spindle holder: ISO 40 Speed: 3150 rpm Spindle stroke: 100mm Weight: approx. 3500kg Control: Philips CNC 432

Lid FP4-MA Contur 2 with handwheel ( universal tool milling machine ) BJ 1987

Spindle speed: 9000rpm, spindle tilt: -5°/45°, spindle stroke: 1000mm, spindle diameter: 30mm, table dimensions X/Y: 750mm/600mm, table height: 880mm, weight: approx. 300kg. An on-site inspection is possible.

Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of Make: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm Clamping surface table: 800x500 mm Spindle revolutions: 20-2780 rpm Levels: 2x continuous Spindle power: 5.5 kW Tool holder: SK40/ISO40 Final drive: 0-2000 mm/min Final drive rapid traverse: 5000 mm/min Quill stroke W: 100 mm Head Swivel: 2x90° Resolution measuring system: 0.001 mm Positioning: +/- 0.02 mm Special features: Protective housing that can be opened, chip tray, quill stroke

DMG, Type DMC 635 Ecoline, YOC 2013 Travel: X 635mm Y 510mm Z 460mm Spindle speed 0-10000/min. Controlled axes 3 Spindle holder SK 40. L x W x H 3,500x4,000x2,700mm Machine weight 4500kg

A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg

Designed for the artisanal milling of olives. Composed of 3 granite stones with a diameter of 1200, 1250 and 1300mm respectively. Back built in pink granite and stainless steel tank. This mill is ideal for oil mills looking for a traditional milling as the granite stones allow a smooth and uniform crushing of the olives while preserving their organoleptic properties. Also on sale: olive paste mixer, stainless steel reception hopper, conveyor belt and more auxiliary equipment for oil mill. Contact us for more information.

Key data: 1400 mm, 440 mm, 450 mm

Year of manufacture: 1978/ GÜ: 2007 Table dimensions ... 2000x425mm Axis X ... 1400mm Axis Y ... 440mm Axis Z ... 450mm Main engine power ... 11kW Machine weight ... 5170kg L x W x H ... 3920x2520mm The machine is in good condition, possible to test under power.

Hermle milling machine

DUGARD EAGLE 850 VMC CNC vertical machining center was built in 2007 in Taiwan by C Dugard Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. All machining processes, i.e. milling, drilling and threading, are performed fully automatically by a reliable high-speed spindle. A large, 24-position magazine selects the shortest possible access path to the cutting tool, thus significantly reducing production cycle times. All this is complemented by an advanced CNC control with many useful functions, which minimises the need for the operator to operate the machine. The EAGLE 850 VMC CNC machining center weighs 5500 kg. Technical specifications of the DUGARD EAGLE 850 VMC CNC milling machine - CNC controller: FANUC 0i-MC - feed in the X/Y/Z axis: 850/520/510 mm - rapid traverse in the X/Y/Z axis: ...

MAGNUM YAMA SEIKI BT-1300 CNC bed milling machine was built in 2007 in Taiwan by Magnum Machinery CO., Ltd. The machine, distinguished by its very rigid design and good kinematics, is an excellent choice for precision machining of heavy workpieces. The machining process is performed inside an enclosed workspace, which includes among others a large work table with a length of 1300 mm and a reliable spindle. Feed in the X and Y axes is performed by the work table, while in the Z axis it is performed by the spindle, which moves along precise vertical guides. All this is complemented by the installed MITSUBISHI CNC control, thanks to which the offered YAMA SEIKI BT-1300 CNC bed mill is extremely easy to operate. Technical specifications of the MAGNUM YAMA SEIKI BT-1300 milling machine - CNC controller: MITSUBISHI MELDAS 60S - work table length: 1300 mm - T-slot number: 5 - power: 22 k ...

Milling center with 8 tool changer. Functional areas are still being built. Comes from research facility and is relatively little used.

Balestrini Junior Longitudinal Copy Milling Machine, Werkstrück length: 1,700mm Double milling cutter for copying milling work with stencil CE Year of manufacture 2001 PLC control defective.. needs to be renewed. Error! No release from the machine. English: Balestrini Junior Dual Copy Profile Shaper Routing Machine Part-length: max. 1700mm 2 shaper machines Template for workding machine does not working! PLS/ PLC Control broken. Machine does not start working. Engine works.

Specifications Working range 250 × 700 mm Copying table size 430 × 600 mm Stroke / working area longitudinal (X) approx. 322 mm Stroke / working area transverse (Y) approx. 200 mm Spindle drive / power approx. 1.5 / 1.7 kW Spindle speed (spindle speed) approx. 80 – 20,000 rpm Copy scale ratio (enlargement / reduction) 1:1 to 1:4 Overall dimensions (approx.) 2,000 × 2,000 × 2,000 mm Weight approx. 1,650 kg