stone mill used for sale

General SKU268K299 MakeRomaco AG Fryma Koruma Rheinfelden TypeCoBall mill MS-50 No.75439/00 Year of construction2000 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume9.8 Ltr. Motor55 KW Specified Features - Sand mill Vertical sandmillAnnular gap bead mill (1x) Capacity9,8 Ltr Housing dimensions dia. 520x300mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Max. temperature80 Degr. C. Motor55,0 KW, 400/690 Volt (Ex) Capacity150-1000 Ltr/Hr MaterialStainless steel Information With switchcheck Floorspace2,1x1,0 M Total height2,3 M ATEX compatiblecheckSand millsRomacoMills > Sand millsBrand > Romaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU312X489 LocationBarneveld CEcheck MakeGörgens Main Features Motor60 KW Inlet diameter400 mm Width400 mm Specified Features - Fine Impact Mill Grindercheck Turbo millcheck Rotor sizeø 800 mm Grinding room size500 Ltr. Housing dimensions ø 900 x 843 mm Inlet400x120 mm Motor60 kW, 400 volt, 1485 rpm Speed1200 – 2100 rpm ± 10 % Fine Impact Mills MaterialStainless steel Information TypeG-90/4 model S No.1289 Year of construction2006 Mounted on framecheck Floor space1,35 x 2,195 m Total height1,66 m Weight4000 kg Extra SpecificationsOperating Conditions Air inlet temperature: :

General SKU214X079 MakeCollin LocationBarneveld TypeW110 AP x 350 Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variatorcheck 3-36 rpm With temperature controlcheck 20-270°C Electrical heatingcheck Information No.1130-25-08 Year of construction2008 With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm :Mixing millsIQAP TechnologiesPlastic machinery > Mixing millsBrand > IQAP Technologies What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

General SKU412W1302 MakeHosokawa Alpine Type100AFG No.13576/1 Year of construction1988 Main Features Vacuumcheck Specified Features - Jet Mill Grindercheck Grinding room sizeDia 100mm With hoppercheck InletDN40 Feeding with rotating valvecheck K-Tron S 200 Motor0,25kW, 380V Speed12.000-22.000rpm Jet Mills MaterialStainless steel 1.4306 (304L), Stainless steel 1.4541 (321) Information Mounted on framecheck LocationBarneveld With switchgearcheck Floor space2x1,2 m Total height1,9 m Weight600 kg Extra Specificationsdata fluidized bed counter jet mill with classifier:grinding chamber diameter: 100mmnozzle diameter: 3x 1.9mmgrinding air flow rate 50-60m³/hfilling quantity molen: 0,8lspeed classifier: 2200-22.000rpmclassifying wheel dia: 50mmfines discharge Ø: 20 mmmotor: 1kW, 220V cyclone data:alpine cyclone GAZ140cyclone diameter: 140mm filter data:alpine filter k ...

This Mazak SLANT TURN 40N - ATC Mill center 1500 was manufactured in 1986. A robust turn-mill centre, it offers reliable performance for various machining needs. Consider the opportunity to buy this Mazak SLANT TURN 40N - ATC Mill center 1500. Contact us for more information.

General SKU446W1483 LocationBarneveld CEcheck Main Features Motor0.75 KW Inlet diameter10 mm Specified Features - Jet Mill MaterialStainless steel 1.4306 (304L) Jet Mills Grinding room sizeDia. 100x16mm InletDia. 10 mm Motor0,75 kW, 230/400 volt, 1400 rpm, (Ex) With variable speed drivecheck Speed18/59/147 rpm Information MakeMicro-Macinazione SA TypeLU 100 IR BD Number0106100.1046.2070 Year of construction2006 Mounted on wheelscheck With switchcheck Floor space0,80 x 1,40 m Total height2,15 m Weight490 kgJet MillsMicromacinazioneMills > Jet MillsBrand > Micromacinazione What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU365X869 LocationBarneveld CEcheck MakeRetsch TypePM400 Main Features MaterialStainless steel Volume0.5 Ltr. Motor1.5 KW Specified Features - Ball mill MaterialStainless steel Ball millcheck CapacityMax 4 x 500 ml Motor1,5kW, 230v Speed30-400 rpm Information No.9 1611 001 F Year of construction1999 Mounted on wheelscheck With switchcheck Floorspace0,83x0,70 m Total height1,20 m Weight285 kg Extra SpecificationsThe PM 400 is a robust floor model with 4 grinding stations for grinding jars.( no Jars included) It can process up to 8 samples simultaneously which results in a high sample throughput. Ball millsRetsch HaanMills > Ball millsBrand > Retsch Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...

General SKU312X491 LocationBarneveld CEcheck MakePallmann Main Features Motor33 KW Inlet diameter120 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4552 Fine Impact Mills Turbo cone millcheck 2 Driven rotorscheck Rotor sizeInner roter ø 396 mm: outer roter 400 mm With grinding trackConidur 1,5: 2: 3 Housing dimensions ø 800 mm Inletø 120 mm Motor22 kW 400 V, 1470 rpm: 11 kW 400 V, 1475 rpm SpeedInner rotor 3000 rpm, outer rotor 1500 rpm Information TypePPS 4-120 No.139820170004 Year of construction2018 Mounted on framecheck Floor space0,9 x 2,8 m Total height1,5 m Weight1600 kgFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

General SKU322X553 LocationBarneveld MakePuc Probst & Class Motor Motor power2.2 kiloWatt Main Features MaterialStainless steel Motor2.2 KW Inlet diameter55 mm Specified Features - Colloid mill MaterialStainless steel Colloid millcheck Rotor sizesø 60 x 40 mm Teethed rotorcheck With hoppercheck ø 300 x 500 mm Hopper jacketedcheck Inletø 55 mm Outletø 32 mm Motor2,2 kW (380 V, 2840 rpm) Information TypeK 60 No.92030 Mounted on wheelscheck With switchcheck Floorspace0,90 x 0,46 m Total height1,10 m Weight110 kgColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

General SKU435X1379 LocationBarneveld Main Features Motor7.5 KW Width340 mm Specified Features - Hammer Mill MaterialMild steel Hammer Mills Hammer millcheck Moving hammers24 Hammer width20 mm With sieve cagecheck Housing dimensions 340 x 500 mm With hoppercheck Inlet340 mm Motor7,5 kW (400 V, 1470 rpm) With variable speed drivecheck Speed882—1764 rpm Information MakeJehmlich GmbH Nossen SerialK190430 TypeHM 341 Year of construction2018 Mounted on framecheck With switchcheck With switchgearcheck Floor space1,45x0,62 m Total height1,95 m Weight600 kg Extra SpecificationsMax capacity up to 20 t/h.Hammer MillsJehmlich GmbH NossenMills > Hammer MillsBrand > Jehmlich GmbH Nossen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

General SKU379X1448 LocationBarneveld MakeCollin TypeTischwalzwerk Main Features Size length210 mm Specified Features - Mixing mill Laboratory presscheck Motor4 kW 380 V Mixing mills MaterialStainless steel Information Mach.No.141 11 86 Year of construction1986 With switchcheck Floorspace1,13 x 0,45 m Total height0,60 m Weight150 kg Extra Specifications2 roller wals, roll dia. 100 mm, roll width 210 mm :Mixing millsCollinPlastic machinery > Mixing millsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU430X1346 LocationBarneveld CEcheck MakePallmann Main Features Motor150 KW Inlet diameter250 mm Width1000 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Hammer millcheck 2 Driven rotorscheck Rotor size995 mm Grinding room sizeø 1000 mm Fixed hammerscheck (60) Hammer width250 mm With sieve cagecheck Housing dimensions ø 1400 mm Inletø 250 mm Motor110 kW, 380 V, 1500 rpm: 55 kW, 380 volt, 1500 rpm SpeedTurbo wheel drive speed 1590 rpm: sieve basket speed 660 rpm Information TypePPSR 10-300 No.0965.2007.0010 Year of construction2007 Mounted on framecheck Floor space4,00 x 1,545 m Total height2,85 m Weight7000 kgFine Impact MillsundefinedMills > Fine Impact MillsBrand > undefined What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ship ...

General SKU409X1224 MakeNetzsch LocationBarneveld CEcheck TypeZeta RS2 Main Features MaterialStainless steel Volume2 Ltr. Motor15 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4301 (304) Horizontal sand millcheck Capacity2 l Housing dimensions dia 150 x 200 mm InletDN15 OutletDN15 With mechanical sealcheck With jacketcheck Motor15 kW, 400 volt, (Ex) With variable speed drivecheck Rotor speed500-2250 rpm With pumpcheck Motor0,55 kW, (Ex), With variable speed drive26-447 l/h, Information No.2800799-10 Year of construction2018 Mounted on framecheck on legs With switchgearcheck Floorspace1,620 x 0,995 m Total height1,760 m Weight1100 kg Extra SpecificationsWith blocking fluid vessel, flow meter, control/power cabinet, touchscreen control.Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in ...

General SKU292W524 MakeDynomill LocationBarneveld TypeKD60 C Main Features MaterialStainless steel Volume60 Ltr. Motor44 KW Specified Features - Sand mill MaterialStainless steel 1.4301 (304) Horizontal sand millcheck Capacity60 Ltr. Motor44 kW, 380 volt, 1465 rpm Rotor speed1475/1170/940 rpm Capacity800-15.000Ltr. 450-550 kg/h Information No.880489 Year of construction1988 With switchcheck Floorspace2,0 x 1,1 m Total height1,5 m Weight1650 kg ATEX compatiblecheck Extra Specifications- Grinding media filling 48-51 l. : : - Peripheral speeds of agitator discs 16/13/10 m/sec Sand millsDynomillMills > Sand millsBrand > Dynomill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm Information No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX compatiblecheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steel With sound proof cabinet Working hours 65 hrs Ball millsSiebtechnikMills > Ball millsBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU364X867 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel Information TypeMP2-W No.P1 187094 /4050 Year of construction2013 Mounted on framecheck Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg Extra SpecificationsWith: dust filter AZO blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm Hammer MillsNew arrivalsHosokawa AlpineMills > Hammer MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At ...

General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...

General SKU363X853 MakeHosokawa Alpine LocationBarneveld CEcheck TypePulvis PV450 Main Features MaterialStainless steel Volume25 Ltr. Motor11 KW Specified Features - Ball mill MaterialStainless steel 1.4301 (304) Ball mills Grindercheck (Agitated ball mill (dry grinding)) Continuous ball millcheck Capacity25 l Drum sizesø 485 mm InletDN100 OutletDN100 With jacketcheck Motor11 kW Speed300 rpm With ballscheck Capacity25 l. Housing dimensions ø 485 mm InletDN100 With jacketcheck Motor11 kW Rotor speed300 rpm With ballscheck Information No.M3 239783 Year of construction2016 Mounted on framecheck With switchgearcheck (as is) Extra SpecificationsHosokawa Alpine Pulvis PV450 with Hosokawa Alpine ATP 140Dry agitated media mill for the production of ultrafine powders. The dry agitated bead mill is equipped with an integrated dynamic air classifier. Capacity:  ...

General SKU409X1227 MakeNetzsch LocationBarneveld CEcheck TypeZeta RS2 Main Features MaterialStainless steel Volume2 Ltr. Motor15 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4301 (304) Horizontal sand millcheck Capacity2 l Housing dimensions dia 150 x 200 mm InletDN15 OutletDN15 With mechanical sealcheck With jacketcheck MotorV With variable speed drivecheck Rotor speed500-2250 rpm With pumpcheck Motor0,55 kW, (Ex), With variable speed drive26-447 l/h, Information No.2800170-10 Year of construction2016 Mounted on framecheck on legs With switchgearcheck Floorspace1,620x0,995 m Total height1,760 m Weight1100 kg Extra SpecificationsWith pump, 0,55 kW, (Ex), 26-447 l/h, blocking fluid vessel, flow meter, control/ power cabinet, touchscreen control.Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- M ...

General SKU337X769 LocationBarneveld Main Features Motor18.5 KW Width375 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeDia. 375x100 mm Grinding room size750x75 mm With sieve cagecheck Inlet170x110 mm Feeding with rotating valvecheck Motor18,5kW, 400/690V, 2955rpm (EX) Speed+- 1350rpm Fine Impact Mills MaterialMild steel, Stainless steel 1.4552 Information MakeKek kemutec Year of constructionunknown Mounted on framecheck Floor space2,2x0,7 m Total height1,65 m Weight850 kg Extra SpecificationsThe housing is made of steel, the rotor is made of stainless steel. with: - dinnissen diverter valve. inlet: 170x110. outlet:170x110 and Dia 75mm - additional parts. Fine Impact MillsKek KemutecMills > Fine Impact MillsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for  ...

General SKU341X785 LocationBarneveld CEcheck MakeBauermeister Main Features Motor37 KW Inlet diameter150 mm Width600 mm Specified Features - Fine Impact Mill MaterialStainless steel Fine Impact Mills Grindercheck Rotor sizeDia. 590 mm Grinding room sizeDia. 600 mm With sieve cagecheck With grinding platenscheck Housing dimensions Dia. 900 mm InletDia. 150/200 mm Feeding with rotating valvecheck Motor37 kW, (400 V, 2980 rpm, (Ex)) Speed300-3000 rpm Information TypeUMT3.3NEX No.542733 Year of construction2005 With control cabinetcheck Floor space2,30 x 1,75 m Total height2,40 m Weight1600 kg Extra Specifications- explosion proof housing - spare rotors - spare grinding plates and grinding sieves Fine Impact MillsBauermeisterMills > Fine Impact MillsBrand > Bauermeister What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU298X414 MakeNetzsch TypeCUM-250/SP LocationBarneveld Main Features Motor11 KW Inlet diameter95 mm Width250 mm Specified Features - Pin Mill MaterialStainless steel 1.4306 (304L) Pin Mills Pin disc millcheck Rotor size50 mm Grinding room sizeDia. 250 mm Number of pins on house side:85 Number of pins on door side:108 Pin diameter8 mm Without sieve cagecheck Housing dimensions Dia. 400 mm InletDia. 95 mm Motor11 kW, 380 volt, 990-2955 rpm, (Ex) With variable speed drivecheck Speed990 rpm Information No.7297 Year of construction2000 Year of construction2000 Floorspace0,70x0,90 m Floor space0,70x0,90 m Total height1,33 m Weight400 kgPin MillsNetzschMills > Pin MillsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

General SKU454W1505 MakeWab Bachofen LocationBarneveld TypeMulti Lab Main Features MaterialStainless steel/Teflon Volume1.5 Ltr. Motor4 KW Specified Features - Sand mill MaterialPTFE (Teflon) Horizontal sand millcheck Capacity±1,5l Housing dimensions Dia. 100x215 mm InletDN15 OutletDN15 With jacketcheck Motor4 kW, 400 volt, 50 Hz, 2875 rpm Without ballscheck Information No.070715 Year of construction2007 With switchgearcheck Floorspace0,68x0,74 m Total height0,58 m Weight97 kgSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU445W1478 MakeFryma LocationBarneveld TypeMZ 80 A Motor Motor power3.3 kiloWatt Main Features MaterialStainless steel Motor3.3 KW Inlet diameter50 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesDia. 70 x 85 mm Cross teethed rotorcheck With hoppercheck InletDia. 50 mm OutletDia. 40 mm Motor3,3 kW, 380 volt, 2860 rpm, (Ex) Speed2860 rpm Materialstainless steel 1.4003, Stainless steel 1.4552 Information No.M14696 Year of construction1990 Mounted on framecheck Floorspace0,50x0,60 m Total height1,20 m Weight92 kg ATEX compatiblecheckColloid millsFrymaMills > Colloid millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU416W1314 LocationBarneveld CEcheck MakeLessine Main Features Motor7.5 KW Inlet diameter100 mm Width100 mm Specified Features - Pin Mill MaterialStainless steel 1.4306 (304L) Pin Mills Pin disc millcheck Rotor size270 mm Grinding room size320 mm Number of pins on house side:45 Number of pins on door side:100 Pin diameter12 Housing dimensions Dia. 400 mm InletDia. 100 mm Motor7,5 kW (400 V, 1470 rpm) Speed3000 rpm Information TypeEL 100 No.21-1132 Year of construction2021 Mounted on framecheck Floor space0,70x1,30 m Total height0,70 m Weight500 kgPin MillsLessineMills > Pin MillsBrand > Lessine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKU405W1265 MakeWAB Bachhofen TypeKD15 LocationBarneveld Main Features MaterialStainless steel Volume15 Ltr. Motor17.5 KW Specified Features - Sand mill MaterialStainless steel 1.4000 (410S) Sand mills Ball millcheck Capacity15 l., (12,5l.) Drum sizesdia. 200x410mm InletDia. 35mm Outletcheck Motor17,5 kW, 380 volt, 1450 rpm (EX) With variable speed drive1305 rpm Speed13 m/sek Information No.890289 Year of construction1989 With switchcheck Floorspace1,150x0,70 m Total height1,60 m Weight560 kg ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU351W929 LocationBarneveld MakeAubema Main Features Motor18.5 KW Width200 mm Specified Features - Hammer Mill MaterialMild steel Hammer Mills Hammer millcheck Rotor size340 mm Grinding room size200 x 600 mm Moving hammerscheck Hammer width190 mm With grinding platenscheck With hoppercheck Inlet200x300 mm Motor18,5 kW, 380/660 volt, 1460 rpm Speedinvullen Information Type2506/2 No.8227 Year of construction1993 Mounted on framecheck With switchcheck Floor space2,6 x 1,1 m Total height2,5 m Weight1000 kg Technical specs Extra informationOutput: 200 x 900 mmHammer MillsAubemaMills > Hammer MillsBrand > Aubema What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU292W525 MakeDynomill LocationBarneveld TypeKD45 CN Main Features MaterialStainless steel Volume49 Ltr. Motor44 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand millcheck Capacity46 Ltr. Motor44 kW, 380 volt. 1475 rpm Rotor speed1170/995/750 tpm CapacityCap. 450-1350 l, theori cap. 350-450 kg/h Information No.860411 Year of construction1986 With switchcheck Floorspace1,5 x 0,80 m Total height1,70 m Weight1250 kg ATEX compatiblecheck Extra Specifications- Grinding media filling 37-39 l. : : - Peripheral speeds of agitator discs 16/13/10 m/s Sand millsDynomillMills > Sand millsBrand > Dynomill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU060U432 MakeComec TypeMicronet 25 No.6757 Year of construction1994 LocationBarneveld Material Housing materialStainless steel Main Features MaterialStainless steel Volume25 Ltr. Motor4 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillDiscontinuous microball mill (1x) Capacity25 Ltr, Useful 8-22 Ltr With sievecheck With mechanical sealcheck With jacketcheck Motor4,0 KW, 220/380 Volt With variable speed drivecheck Information With switchgearcheck Floorspace1,2x0,5 M Total height1,5 M Weight230 KGSand millsComecMills > Sand millsBrand > Comec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU022Y162 MakeComec Sassuolo TypeMicronet Tipo M8 No.7107 Year of construction1995 LocationBarneveld Material Housing materialStainless steel Disc materialStainless steel Main Features MaterialStainless steel Volume8 Ltr. Specified Features - Sand mill MaterialStainless steel Vertical sandmillDiscontinuous micro ball mill (1x) Capacity8 Ltr Housing dimensions dia. 170x335mm With sievecheck With jacketcheck Motorcheck Information With switchcheck Floorspace0,6x0,6 M Total height1,1 M Weight160 KG Extra Specifications- Mixing chamber equipped with 2 dissolver discs (dia. 115mm) on 1 shaft Sand millsComecMills > Sand millsBrand > Comec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherl ...

General SKU120X674 MakeVMA-Getzmann TypeDispermat 5 No.601-9814689 Year of constructionunknown, Milling chamber made of glass Mounted on framecheck Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck Information LocationBarneveld Floorspace0,9x0,6 M Total height1,5 M Weight175 KGSand millsVMA-GetzmannMills > Sand millsBrand > VMA-Getzmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnevel ...

General SKU241S147 MakeBühler Cobra 501 TypeSRK 440 No.10208703 Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia.320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt Information With switchgear(as is) Floorspace2,3x1,6 M Total height2,8 M Weight2700 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU290S398 MakeRetzsch Typeunknown Year of constructionUnknown, manufacturer plate is missing LocationBarneveld Main Features MaterialMild steel/Stainless steel Volume20 Ltr. Motor17.5 KW Specified Features - Sand mill Attritorcheck Capacity20 Ltr. Housing dimensions dia. 230x485mm Inletdia. 25mm Outletdia. 25mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor17.5 kW 380 Volt With variable speed drivecheck Without ballscheck Capacity20 Ltr. Information Floorspace1.3x0.75 M Total height1.75 M Weight700 KgSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU286M326 MakeALPINE A.G./ Henco & Co. TypeATP200 / 4ATP No.unknown, manufacturer tag is missing Year of construction+/- 2006 Mounted on framecheck Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Classifier mill MaterialCeramic, Mild steel Classifier Mills GrinderMulti-wheel air classifier Mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Information LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgClassifier millsHosokawa AlpineMills > Classifier millsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld fo ...

General SKU248T369 MakeBühler TypeSDVE-1300 No.10294318 Year of construction1998 LocationBarneveld Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill MaterialMild steel, Stainless steel Three roll millcheck Roll diameter400 mm Roll width1300 mm Motorcheck Landert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck Information Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsBühlerMills > Three roll millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU234S120 MakeBühler Cobra 501 TypeSRK 440 No.10310050 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt Information With switchcheck Floorspace2,1x1,5 M Total height2,9 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU253S172 MakeBühler AG (CH) TypeCobra 201, SKR 440 No.10194572 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt MaterialStainless steel Information Floorspace2,1x1,1 M Total height2,7 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU253S176 MakeBühler AG (CH) TypeCobra 501, SKR 440 No.10129787 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt Information With switchgear(as is) Floorspace2,1x1,1 M Total height2,6 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU248T371 MakeBühler TypeSDVE-1300 No.10188335 Year of construction1996 LocationBarneveld Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill MaterialMild steel, Stainless steel Three roll millcheck Roll diameter400 mm Roll width1300 mm Motor75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck Information Floorspace2,6x1,7 m Total height1,6 m Weight4452 kgThree roll millsBühlerMills > Three roll millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU353S829 LocationBarneveld MakeHosokawa Micron TypeACM-15 Main Features Motor11 KW Inlet diameter160 mm Specified Features - Classifier mill MaterialMild steel Classifier Mills Grindercheck Rotor sizeØ 190x90 mm Grinding room sizeØ 275 mm Fixed hammerscheck Number of pins on house side:24 With grinding trackcheck InletØ 160 mm Feeding with rotating valvecheck Motor11 kW 400/690 Volts With variable speed drivecheck Speed160 - 1 600 rpm. Information No.600088071 Year of construction1988 Mounted on framecheck With switchgearas is Floorspace1,3x1,4 m Total height1,4 m Weight2 450 kg Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul :RAL 6, with spare partsClassifier millsHosokawa MikropulMills > Classifier mills ...

General SKUR1227 LocationBarneveld MakeAlpine Augsburg (D) Main Features Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor sizedia 710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm Inlet120x400mm Feeding with rotating valvecheck Pin Mills MaterialMild steel Information Type710-CW Year of constructionunknown, manufacturer plate is missing Floorspace2,3x2,2 M Total height2,3 M Weight3500 KgPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU255T404 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Inlet diameter140 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesdia. 75x140mm Teethed rotorcheck With hoppercheck Inletdia. 80 mm Outletdia. 36 mm Motor7,5 kW 380 Volt Speed2850 rpm MaterialStainless steel 1.4435 (316L) Information MakeColloVelox No.2114 Mounted on wheelscheck With switchcheck Floorspace0,7x0,8 m Total height1,2 m Weight250 kgColloid millsBrogliMills > Colloid millsBrand > Brogli What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU286M325 MakeALPINE A.G./ Henco & Co TypeATP200 / 4ATP No.manufacturer tag is missing Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Classifier mill GrinderMulti-wheel air classifier mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Classifier Mills MaterialCeramic, Mild steel Information Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgClassifier millsHosokawa AlpineMills > Classifier millsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

General SKU377S917 LocationBarneveld MakeNeumann & Esser Main Features Motor7.5 KW Inlet diameter55 mm Specified Features - Classifier mill MaterialMild steel, Stainless steel Classifier Mills Grindercheck Rotor sizedia. 305 mm Grinding room sizedia. 320x70 mm With grinding trackcheck Housing dimensions dia. 315x70 mm InletDN 50 Feeding with rotating valvecheck Motor1,1 kW 380-420/660-690 Volt: 7,5 kW 380-420/660-690 Volt Information TypeICM-15 No.02.300.0166 Year of construction2002 Floorspace1,25x0,85 m Total height1,4 m Weight750 kg Extra SpecificationsWith: Dosing airlock Dust collector Cyclone collector Ex barier valve TurbofanClassifier millsNeumann & EsserMills > Classifier millsBrand > Neumann & Esser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

General SKU248T372 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm Motorcheck Landert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel Information No.10294316 Year of construction1998 Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsBühlerMills > Three roll millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0379 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Fine Impact Mills MaterialMild steel Information No.162166 Year of construction1981 Floorspace1,1x0,9 M Total height1,1 M Weight720 KgFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR1136 MakeNetzsch Feinmahltechnik GmbH (D) LocationBarneveld TypeLME-50 (figur nr 574) Main Features MaterialStainless steel Volume50 Ltr. Motor36 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand millcheck Capacity50 ltr Housing dimensions dia. 300x950mm Inletdia. 25mm Outletdia. 25mm With mechanical sealcheck With jacketcheck Motor36 kW 380 Volt (ex) Information No.204491 Year of construction1979 Floorspace1,9x1,0 M Total height2,0 M Weight1380 Kg ATEX compatiblecheckSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR1137 MakeDrais Draiswerke GmbH (D) LocationBarneveld TypePMV 50 RL Main Features Volume50 Ltr. Motor36 KW Specified Features - Sand mill Vertical sandmillcheck Capacity50 Ltr Housing dimensions dia. 295x730mm Inletdia. 25mm Outletdia. 25mm Motor36 kW 220/380 Volt With pumpcheck Motor1,36 kW 220/380 Volt Information No.52775 Year of construction1986 With switchcheck Floorspace1,7x1,2 M Total height2,7 M Weight2850 Extra Specificationsincluding replacement housing, discs and spacers Sand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU241S145 MakeBühler Cobra 501 LocationBarneveld TypeSRK 440 Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 Volt MaterialStainless steel Information No.10208705 Year of construction1992 Floorspace2,2x1,6 M Total height2,7 M Weight2600 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!