stone mill used for sale

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 6.6 kW 8915 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 35 mm -Dimensions: 520/247/H145 mm -Weight: 41 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 5820 rpm at 100 Hz -Power: 3.7 kW 17350 rpm at 300 Hz -Voltage: 220/220 volts -Shaft holder: Ø 24 mm -Dimensions: 355/125/H210 mm -Weight: 20 kg

Refer to code 1033 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box

Universal milling head, milling chuck, milling extension, angle milling head -Spare part from an R

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine, upper support -Swallowtail: 86 by 73 mm 14 mm high -Drawing with the photos -Dimensions main part: 132/760/H112 mm -Dimensions intermediate part: 138/324/H55 mm -Weight: 40 kg

Refer to code 1060 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

PROMA FVV-135PD universal milling machine was built in 2018 in the Czech Republic. The highly reliable machine with a rigid construction is designed for precise machining of workpieces both vertically and horizontally, thanks to the vertical and horizontal spindle with an ISO 40 taper. The milling process is performed in the X,Y,Z axes on a fully illuminated working area with dimensions (L x W) of 1320 x 320 mm. The milling machine is additionally equipped with, among others, a SINO digital readout and cooling. The total weight of the machine is 2100 kg. Technical data of the PROMA FVV-135PD milling machine - work table size (L x W): 1320 x 320 mm - axis work feed: X,Y,Z - feed of table in X/Y axis: 1000/300 mm - rotation angle of rotary head: 360° - maximum vertical milling diameter: 25 mm - maximum horizontal milling diameter: 125 mm - maximum milling head diameter: 125 mm  ...

Ball Mill Vollrath EFC 200 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 200 l Drive power 1.4 kW Speed 42 1/min 3 ball mills each mounted on steel structure Very good operational condition, directly from production!

Grinder mill with blades Brand: Soriano, cutting chamber: 750x650 mm, motor: 40 hp. Triple rotor in ladder with 9 mobile blades and 6 fixed. With electrical panel. Flywheel.

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 111 by 134 mm 20 mm high -Drawing with the photos -Dimensions: 290/90/H225 mm -Weight: 12 kg

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 145 by 190 mm, 30 mm high -Drawing with the photos -Dimensions: 290/85/H210 mm -Weight: 12 kg

Shape milling machine Brandt type FP 10 Specifications: • Year of construction: 1989 • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 - depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm. • Electrical: 220 V - 1 Ph. - 50 Hz • Power supply (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Swabing unit: for processing thick PVC edges • Weight (kg): approx. 120

Refer to code 1056 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Grinder mill with blades Soundproofed. Cutting chamber: 650x650 mm, motor: 37 Kw (50 hp). Stepped rotor. With electrical panel and 5 spare screens.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.7 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.3 kW at 2800 rpm at 50 Hz -Voltage: 380 volts -Receiving shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg

Precision Deburring Faceting Milling Machine / Edge Milling Machine Specifications: Steel – stainless steel – aluminium – plastic – machining Deburring and faceting process is carried out with milling cutter Support angle - facet angle tiltable Facet angle adjustment 15 to 45 ° Facet width infinitely adjustable 0 to 7 mm Length of guide strip 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Refer to code 1077 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 148 by 178 mm by 30 mm high -Bore diameter: 45 mm -Drawing with the photos -Dimensions: 300/80/H255 mm -Weight: 14 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1 kW 17030 rpm at 300 Hz -Voltage: 165 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 280/60/H110 mm -Weight: 4.3 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: each 150 by 181 mm 48 mm high -Drawing with the photos -Dimensions: 390/115/H310 mm -Weight: 34 kg

Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 125 by 160 mm 25 mm high -Drawing with the photos -Dimensions: 300/110/H205 mm -Weight: 14 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Refer to code 1085 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW at 11300 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm -Weight: 3.6 kg

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Hole: Ø 50 mm -Weight: 14 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 15 kg

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 9 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

EUROMETAL FU-32B universal milling machine was built in 2008 in Poland. The process of precision machining of workpieces is performed on a large work table with a length of 1320 mm and a width of 315 mm using a highly efficient spindle rotating at a maximum speed of 1800 rpm. The total weight of the EUROMETAL FU 32B machine is 2100 kg. Technical data of EUROMETAL FU-32B milling machine - work table dimensions (L x W): 1320 x 315 mm - feed rate in the X/Y axis: 850/235 mm - spindle rotational speed: 1800 rpm - distance between spindle axis and table: 400 mm - spindle drive motor power: 5.5 kW - feed drive motor power: 1.5 kW - dimensions (L x W x H): 2000 x 1474 x 2080 mm - EUROMETAL FU32B machine weight: 2100 kg

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Horizontal milling machine Table length 65 cm x 400 mm y 120 mm Z 300 mm Length 1.20 m Width 1 m Height 1.60 m Vice

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -Manufacturer: OPPOLD -Hole: Ø 40 mm -Price/Sale: complete -Quantity: 1x pallet of tools, various sizes -Weight: 46 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg

Stock Number: 3786 PROCESSING Manufacturer: YCM, Type: FV56A Machine NO.: 401397, Year of manufacture: 2004 Specifications: Gr. table load 300 kg Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 450 mm Gr. distance spindle/table 444 mm Spindle speeds 0-8000 rpm Tool changer 20 places Control Fanuc MXP 100I Fabr. Controlled in axes 3 Operating hours spindle 4042 hours Accessories: Pallet changer 2 - 560 x 420 mm Cooling by spindle Operating instructions Length: 2500 mm, Height: 2450 mm, Width: 1965 mm, Weight: 3000 kg

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !